218 views
Trailer 6x4 Camper/work
$2,400 Negotiable
I put together this 4x6ft (approx), galvanised steel trailer for a number of uses.
When broken down to its simplest state it is ideal for working - tools, sand/cement bags, mulch, etc.
I then built in the back cross bar which further assists trade use - timber lengths, sheets of material, et al. The tool box is firmly bolted to the front and stores a significant amount of gear.
My next addition for an extensive trip with the family around Aus' was the Rhino basket and canvas covers. I loaded in, with ease, an RX5 tent with extension, deck chairs, bbq gear, all of our baggage and two double kayaks over the top (I wish I had that pic).
This trailer comfortably took four of us all over NSW, with ease (fond memories).
All of our gear was dry and easily set up at every stop. It was nice having all the gear atop the trailer which gave us planty of spce in thwe car while travelling.
The two tyres are brand new and the spare is tip top. It’s a few months out of rego but I can put that on with the blink of an eye.
We’ve moved overseas for a few years and I don’t see the point of this terrific rig sitting around getting dusty. It belongs with the right person, being used.
The whole thing cost me 4k to set up. I’ll sell it for $2600 or nearest offer. It has a 500kg capacity.
It's stored in my mates garage, who has offered sell it for me, so only serious buyers, please.
Thanks.
When broken down to its simplest state it is ideal for working - tools, sand/cement bags, mulch, etc.
I then built in the back cross bar which further assists trade use - timber lengths, sheets of material, et al. The tool box is firmly bolted to the front and stores a significant amount of gear.
My next addition for an extensive trip with the family around Aus' was the Rhino basket and canvas covers. I loaded in, with ease, an RX5 tent with extension, deck chairs, bbq gear, all of our baggage and two double kayaks over the top (I wish I had that pic).
This trailer comfortably took four of us all over NSW, with ease (fond memories).
All of our gear was dry and easily set up at every stop. It was nice having all the gear atop the trailer which gave us planty of spce in thwe car while travelling.
The two tyres are brand new and the spare is tip top. It’s a few months out of rego but I can put that on with the blink of an eye.
We’ve moved overseas for a few years and I don’t see the point of this terrific rig sitting around getting dusty. It belongs with the right person, being used.
The whole thing cost me 4k to set up. I’ll sell it for $2600 or nearest offer. It has a 500kg capacity.
It's stored in my mates garage, who has offered sell it for me, so only serious buyers, please.
Thanks.
- Date Listed:20/03/2024
- Last Edited:26/03/2024
- Listing Type:Private seller
Similar Ads
- 8x5 HEAVY DUTY HOT DIPPED GALVANISED TANDEM AXLE BOX TRAILER 450mm HIGH SIDED BODY 2000kg GVM8 x 5 tandem axle (braked) hot dipped galvanised H/duty box trailer high sided (cage not included – optional extra) Features: Disc brakes (mechanical override) Front & rear tail gates Box chassis Led lights Full side skirts Raised tie rails New rims & tyres Swivel Jockey wheel Dual safety chains 2000 kg gvm Rocker roller Eye to eye springs Specs: Internal size: 2430 x 1520 mm External size: 4480 x 2050 mm Tare weight: 600 kg Gvm: 2000 kg Payload: 1400 kg Chassis: 70 x 50 x 3.0 mm Dr$3,950Erina, NSW•19h
- 8x5 HEAVY DUTY HOT DIPPED GALVANISED BOX TRAILER WITH 600mm CAGE8 x 5 single axle (non-braked) hot dipped galvanised H/duty box trailer with 600 mm cage Features: Tilt function Removable cage (front & rear gates) Front & rear tail gates Box chassis Led lights Full side skirts Raised tie rails New rims & tyres Swivel Jockey wheel Dual safety chains 750 kg gvm Eye to eye springs Specs: Internal size: 2420 x 1520 mm External size: 4100 x 1990 mm Tare weight: 340 kg Gvm: 750 kg Payload: 410 kg Chassis: 50 x 50 x 3.0 mm Drawbar: 1500 x 70 x 50 x 3.0 m$2,600Erina, NSW•19h
- 9x5 HEAVY DUTY HOT DIPPED GALVANISED TANDEM AXLE HYDRAULIC TIPPING 450mm HIGH SIDED BOX TRAILER 32009x5 HEAVY DUTY HOT DIPPED GALVANISED TANDEM AXLE HYDRAULIC TIPPING 450mm HIGH SIDED BOX TRAILER 3200kg GVM Features: • ATM 3500KG • Barn Door Design • Free 8” Jockey Wheel • New Plug in Cage Design (Steady and Easy to Remove) • 4 Stage 3500kg Hydraulic Ram • Remote Controller and Battery are Included in the Front ToolBox • 4 Tie Down Rails are Welded All The Way Around • Front and Rear Tailgates That Can Be Easily Removed • Extended Foot Step for Jerry Can Hold • Fully Welded Body • Reinforce$8,400Erina, NSW•19h
- 7x5 HEAVY DUTY HOT DIPPED GALVANISED BOX TRAILER WITH 600mm CAGE7 x 5 single axle (non-braked) hot dipped galvanised H/duty box trailer with 600 mm cage Features: Tilt function Removable cage (front & rear gates) Front & rear tail gates Box chassis Led lights Full side skirts Raised tie rails New rims & tyres Swivel Jockey wheel Dual safety chains 750 kg gvm Eye to eye springs Specs: Internal size: 2120 x 1520 mm External size: 3800 x 2050 mm Tare weight: 320 kg Gvm: 750 kg Payload: 430 kg Chassis: 50 x 50 x 3.0 mm Drawbar: 1500 x 70 x 50 x 3.0 m$2,500Erina, NSW•19h
- 8x5 HEAVY DUTY HOT DIPPED GALVANISED HYDRAULIC TIPPING 400mm HIGH SIDED BOX TRAILER8x5 HEAVY DUTY HOT DIPPED GALVANISED SINGLE AXLE HYDRAULIC TIPPING 400mm HIGH SIDED BOX TRAILER 1600kg GVM Features: • ATM 1600KG • Free 8” Jockey Wheel • Optional Cage With New Plug in Design (Steady and Easy to Remove) • 4 Stage 3000kg Hydraulic Ram • Remote Controller and Battery are Included in the Front Tool Box • 4 Tie Down Rails are Welded All The Way Around • Front and Rear Tailgates That Can Be Easily Removed • Extended Foot Step for Jerry Can Hold • Fully Welded Body • Reinforced Ch$6,000Erina, NSW•19h
- 8x 5 HEAVY DUTY HOT DIPED GALVANISED SINGLE AXLE BRAKED BOX TRAILER 500mm HIGH SIDED BODY8 x 5 single axle (braked) hot dipped galvanised H/duty box trailer with high sides (cage not included – optional extra) Features: Disc brakes (mechanical override) Front & rear tail gates Box chassis Led lights Full side skirts Raised tie rails New rims & tyres Swivel Jockey wheel Dual safety chains 1400 kg gvm Eye to eye springs Specs: Internal size: 2420 x 1520 mm External size: 4180 x 2050 mm Tare weight: 500 kg Gvm: 1400 kg Payload: 900 kg Chassis: 70 x 50 x 3.0 mm Drawbar: 1500$3,150Erina, NSW•19h
- 8x5 TANDEM AXLE 3500kg ATM HEAVY DUTY HOT DIPPED GALVANISED HYDRAULIC TIPPING TRAILER8x5 TANDEM AXLE 3200 GVM HOT DIPPED GALVANISED HEAVY DUTY HYDRAULIC TIPPING TRAILER FEATURES: • ATM 3500KG • Barn Door Design • Free 8” Jockey Wheel • New Plug in Cage Design (Steady and Easy to Remove) • 4 Stage 3000kg Hydraulic Ram • Remote Controller and Battery are Included in the Front ToolBox • 4 Tie Down Rails are Welded All The Way Around • Front and Rear Tailgates That Can Be Easily Removed • Extended Foot Step for Jerry Can Hold • Fully Welded Body • Reinforced Chassis & Hinges • Gr$7,900Erina, NSW•19h
- 7x4 HEAVY DUTY HOP DIPPED GALVANISED BOX TRAILER WITH 600MM CAGE7 x 4 single axle (non-braked) hot dipped galvanised H/duty box trailer with 600 mm cage Features: Tilt function Removable cage (front & rear gates) Front & rear tail gates Box chassis Led lights Full side skirts Raised tie rails New rims & tyres Swivel Jockey wheel Dual safety chains 750 kg gvm Eye to eye springs Specs: Internal size: 2120 x 1210 mm External size: 3480 x 1680 mm Tare weight: 250 kg Gvm: 750 kg Payload: 500 kg Chassis: 50 x 50 x 3.0 mm Drawbar: 1200 x 70 x 50 x 3.0 m$2,400Erina, NSW•19h
- FOLDING BOAT TRAILER FOR UP TO A 3.7mt HULLFOLDING BOAT TRAILER FULLY GALVANISED LENGTH: 4.10mt WIDTH: 1.33mt TARE: 80kg ATM: 265kg PAYLOAD: 185kg WHEELS: 4.8x8$2,050Erina, NSW•19h
- 9x5 TANDEM AXLE BRAKED HEAVY DUTY HTOP DIPPED GALVANISED BOX TRAILER WITH 600mm CAGE9 x 5 tandem axle (braked) hot dipped galvanised H/duty box trailer with 600 mm cage Features: Disc brakes (mechanical override) Removable cage (front & rear gates) Front & rear tail gates Box chassis Led lights Full side skirts Raised tie rails New rims & tyres Swivel Jockey wheel Dual safety chains 2000 kg gvm Rocker roller Eye to eye springs Specs: Internal size: 2730 x 1520 mm External size: 4750 x 2050 mm Tare weight: 620 kg Gvm: 2000 kg Payload: 1380 kg Chassis: 70 x 50 x 3.0$3,950Erina, NSW•19h
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 2253