26 views
2 X K&N REPLACEMENT AIR FILTER FOR NISSAN GT-R R35 VR38DETT 3.8L V6
$170
MACE ENGINEERING GROUP
PAIR OF K&N REPLACEMENT AIR FILTERS TO SUIT NISSAN GT-R R35 VR38DETT TWIN TURBO 3.8L V6
Vehicle Fitment: GT-R R35
For further details, please refer to the vehicle fitment guide in the above image.
Part Number: AF625
These K&N replacement air filters are specifically designed to increase horsepower, improve airflow by capturing contaminants and lasts for the entire lifespan of your vehicle. The design of this air filter uses layered, oiled cotton media thus it is washable and reusable. These drop-in replacement air filters are specifically designed to fit in your car's factory air box. These filters not only put you at ease as they are easy to install but are also responsible for the high performance.
These air filters are specifically designed to suit the Nissan GT-R fitted with the VR38DETT Twin Turbo V6 engine.
Key Features:
- Provides high air flow with exceptional filtration.
- Lasts up to 50,000 miles before cleaning is required depending on the driving conditions.
- Will NOT void vehicle warranty.
- K&N 10 year/million mile limited warranty.
Contents:
- 2 X Air filter
***Please note that all items include free delivery Australia wide***
Contact us directly through Gumtree and we’ll be more than happy to help you out.
Alternatively, you can contact us on the following:
Website – maceengineering.com.au
Phone – ******** 223
Email – inf******@******.au
About Us:
Their encouraging support and positive feedback reflect the exceptional quality of our products and services. Please feel free to contact us if you are looking for a part from the aforementioned categories and we'll do our best to help out. No matter how complex the project you may have, we can provide you with all the required parts and unparalleled advice.
G2169
PAIR OF K&N REPLACEMENT AIR FILTERS TO SUIT NISSAN GT-R R35 VR38DETT TWIN TURBO 3.8L V6
Vehicle Fitment: GT-R R35
For further details, please refer to the vehicle fitment guide in the above image.
Part Number: AF625
These K&N replacement air filters are specifically designed to increase horsepower, improve airflow by capturing contaminants and lasts for the entire lifespan of your vehicle. The design of this air filter uses layered, oiled cotton media thus it is washable and reusable. These drop-in replacement air filters are specifically designed to fit in your car's factory air box. These filters not only put you at ease as they are easy to install but are also responsible for the high performance.
These air filters are specifically designed to suit the Nissan GT-R fitted with the VR38DETT Twin Turbo V6 engine.
Key Features:
- Provides high air flow with exceptional filtration.
- Lasts up to 50,000 miles before cleaning is required depending on the driving conditions.
- Will NOT void vehicle warranty.
- K&N 10 year/million mile limited warranty.
Contents:
- 2 X Air filter
***Please note that all items include free delivery Australia wide***
Contact us directly through Gumtree and we’ll be more than happy to help you out.
Alternatively, you can contact us on the following:
Website – maceengineering.com.au
Phone – ******** 223
Email – inf******@******.au
About Us:
Their encouraging support and positive feedback reflect the exceptional quality of our products and services. Please feel free to contact us if you are looking for a part from the aforementioned categories and we'll do our best to help out. No matter how complex the project you may have, we can provide you with all the required parts and unparalleled advice.
G2169
- Date Listed:24/02/2020
- Last Edited:19/04/2021
- Condition:New
- Warranty:Yes
- Model:GT-R
- Make:Nissan
Similar Ads
- Nissan R35 GTR OEM inlet/intake pipe VR38I have a pair of standard OEM turbo intake/inlet pipes off a 2010 R35 GTR, these were removed when the vehicle was new and have been stored since. Pickup Eltham$200Eltham, VIC•21w
- Nissan skyline GTR RB26DETT HKS GT2510 twin turbo set upRefer to pics discontinued HKS2510 turbos for RB26 to suit r32 r33 r34 GTR comes with manifolds In good condition rated for 600hp and neat low mount set up 2500 for set up Can come with dump and front pipe for extra$2,500Keilor Downs, VIC•28w
- Nissan skyline r32 GTR AFM air flow MetreAs above nissan skyline afm two available for Rb26dett rb26 After 150 each or can do a deal for two$150Keilor Downs, VIC•333w
- Holley 4 barrel Carby adaptor plateHolley carby 4 barrel adaptor plate $40.....Pick up from St Albans in Melbourne Western Suburbs or Can Post Australia Wide for $10...Ph:.................................................................................................................................................................................................................................................................................................................................................................$40St Albans, VIC•55w
- MX5 K&N Replacement Air Filter NB nb8a nb8b nb8c mazda cold air mazdaMX5 K&N Replacement Air Filter Fits all nb models of mazda mx5 $40$40Newport, VIC•4d
- Nissan skyline GTR super coppermix copper mix pull type clutchAs above to suit r33 GTR SKYLINE RB26DETT clutch and flywheel good for those looking to upgrade very reputable clutch May suit other models r34 pull type GTR stagea After 1500 or make an offer$1,500Keilor Downs, VIC•327w
- Nissan skyline GTR stock coilpack x1Price is for one can do multiple if needed After 40 each came off rb26dett for skyline gtr r32, good to replace or test Can post$40Keilor Downs, VIC•272w
- R32 Skyline Engine ECUsR32 Skyline RB20DET Manual ECU: 23710-04U01 - $500 R32 Skyline GT-R RB26DETT Genuine Remanufactured ECU with Nistune Board installed: 2371M-11U01 - $850 Both ECUs can be used to run RB20s or as a plug in ECU that supports Nistune for R33 RB25DET's as the R33 ECUs do not support Nistune. Both ECUs will be required to be sent back to Nistune for modification if you're planning on using in an RB25DET R33. Only the RB26DETT ECU has a Nistune Board.$500Pakenham, VIC•74w
- Genuine K&N Intake Air Filter - BMW N55Brand: K&N Make: BMW N55 E-Series Type: Drop-in repleacement air filter Part No: 33-2458 Condition: As new, done less than 2000km Qty: 1 pc K&N drop-in replacement air filter, utilises back the original air box, high-flow 100% cotton air filter, washable and resuable. Fitment: make sure you car engine is exactly the same as the photo as per my advertisement. Cash pick up only$50Scoresby, VIC•133w
- Nissan 350z / V35 - VQ35DE- AFM / MAF - Air flow meterItem: MAF / AFM Suit VQ35DE Removed from 350z Part number in pics Good working condition - includes start up warranty *********************************************************** INSPECTIONS: Available via appointment only during business hours. SHIPPING: Local pickup available from our warehouse in Craigieburn VIC or enquire with your postcode for a shipping quote. INSTALLATION: Do you need the part fitted? Installations available for all parts at our workshop, including all mechanical and e$110Craigieburn, VIC•148w
- 2 X BALL JOINT FOR TOYOTA BUICK L27 1GRFE 2GRFE 2GRFKS 3MZFE 5VZFE V6MACE ENGINEERING GROUP PAIR OF WASP BALL JOINTS TO SUIT TOYOTA BUICK LN3 L27 3VZ-E 3VZ-FE 1MZ-FE 3MZ-FE 5VZ-FE 1GR-FE 2GR-FE 2GR-FKS 3.0L 3.3L 3.4L 3.5L 3.8L 4.0L V6 Vehicle Fitment: 4Runner VZN130R, Aurion GSV40R GSV50R, Alphard MNH10R MNH15R, Avalon MCX10R, Camry VCV10R VDV10R MCV20R MCV36R GSV70R, Estima MCR30R MCR40R GSR50R GSR55R, FJ Cruiser, GSJ15R, Granvia VCH10R VCH16R, HiLux VZN130R VZN167R VZN172R GGN15R GGN25R GGN120R GGN125R, Harrier MCU10R MCU15R MCU35R, Kluger MCU28R GSU40R GSU45R$70Melbourne CBD, VIC•5w
- 2 X BALL JOINT FOR TOYOTA 5S-FE 3S-FE 3S-GE 3S-GTE 1GD-FTV 1KD-FTV I4MACE ENGINEERING GROUP PAIR OF WASP FRONT BALL JOINTS TO SUIT HOLDEN T1KZ-TE 2AZ-FE 2AR-FE 2AR-FXE A25A-FXS 5S-FE 3S-FE 3S-GE 3S-GTE 4A-FE 7A-FE 7A-FET 1ZZ-FE 2ZZ-GE M20A-FKS 2ZR-FXE 2ZR-FE 3ZR-FE 1NZ-FE 2NZ-FE 8NR-FTS 2Y 3Y 3Y-E 3Y-J 4Y 4Y-E 22R 1RZ-E 2RZ 2RZ-E 3RZ-FE L 2L 2L-T 2L-TE 3L 5L 5L-E 1TR-FE 2TR-FE 2KD-FTV 1GD-FTV 1KD-FTV 2GD-FTV 1NZ-FXE 1AZ-FE 2AD-FTV 2AD-FHV TURBO DIESEL 1.2L 1.3L 1.5L 1.6L 1.8L 2.0L 2.2L 2.4L 2.5L 2.7L 2.8L 3.0L I4 Vehicle Fitment: 4Runner YN63R LN61R RN130R YN130$56Melbourne CBD, VIC•5w
- BALL JOINTS FOR HOLDEN 307 327 253 308 350 LS1 L76 L98 304 STROKER V8MACE ENGINEERING GROUP PAIR OF WASP BALL JOINTS FOR HOLDEN LS1 L76 L98 33 308 350 STROKER 4.1L 5.0L 5.4L 5.7L 6.0L V8 Vehicle Fitment: Adventra VY VZ, Belmont HK HT HG HQ HJ HX, Brougham HK HT HG, Calais VK VL VN VP VS WH VZ, Caprice VS VQ WH WK WL, Commodore VB VC VH VK VL VN VG VP VT VT.II VU VX VY VZ, Crewman VY VZ, Gts HZ, Kingswood HK HT HG HQ HJ HX HZ WB, Monaro HK HT HG HQ HJ HX HZ V2 VZ, One Tonner HQ HJ HX HZ WB VY, Premier HK HT HG HQ HJ HX HZ, Statesman HQ HJ HX HZ WB VQ$60Melbourne CBD, VIC•5w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 223