58 views
MACE LIFTER REPLACEMENT KIT FOR HOLDEN LS1 5.7L V8 FROM 10/2003
$920
MACE ENGINEERING GROUP
MACE LIFTER REPLACEMENT KIT TO SUIT HOLDEN LS1 5.7L V8 FROM 10/2003
Vehicle Fitment: Adventra VY VZ, Calais VY VZ, Caprice WK WL, Commodore VY VZ, Crewman VY VZ, Monaro V2 VZ, One Tonner VY VZ, Statesman WK WL
For further details, please refer to the vehicle fitment guide in the above images.
Part Number: SPG842
Mace lifter replacement kit comprises of hydraulic roller lifters, lifter trays, head gaskets and head bolts. This kit suits Holden Commodores and similar platforms fitted with the LS1 from 10/2003.
The Genuine GM high performance hydraulic roller lifters are an upgrade for factory lifters with refined durability and performance. These are a performance replacement for stock hydraulic roller lifters, are preloaded and have to be installed between 3/8 and 3/4 turn (vs. 1/2 to 1.5 turns on stock lifters).
The Genuine GM OE replacement LS lifter tray/guide set included in the kit is specifically designed to hold the lifters in place and keep them from rotating. These guides with side grooves can accommodate four valve lifters in each and a total of four guides, is required for an engine.
The Genuine GM MLS (Multi-Layer Steel) head gasket set is a perfect fit for both stock and mildly modified engines. These gaskets feature 3 layered stainless steel faces.
ARP produces fasteners from a wide combination of materials going from famous hardened steel and 8740 chrome moly to exotic alloys that have been created to deal with space travel. 8740 chrome moly used in the head bolt kit is classified as a quench and temper steel, that can be heat-treated to provide tensile strengths between 180,000 and 210,000 psi. The head bolt kit comes complete with hardened washers and high-strength hex nuts.
Gasket Specifications:
- Gasket material: Multilayer steel (MLS)
- Maximum bore size: 3.920"
- Compressed thickness: 0.051"
- GM part number: ****8544
Contents:
- 01 X MLS cylinder head gasket set
- 01 X Fastener assembly lubricant
- 04 X GM Lifter tray/guide
- 10 X Short cylinder head bolt (M8 x 1.25 x 45)
- 16 X Hydraulic roller lifter
- 20 X Long cylinder head bolt (M11 x 2.00 x 100)
- 30 X Washers to suit different size bolts
Notes:
- The image is for illustrative purposes only.
- Lifter replacement kit for LS1 till 09/2003 can be purchased through another listing.
- Please follow the torque specifications as recommended by the service manual.
- The hydraulic roller lifters, lifter trays, head gaskets and head bolts can be separately purchased through other listings.
***Please note that all items include free delivery Australia wide***
Contact us directly through Gumtree and we’ll be more than happy to help you out.
Alternatively, you can contact us on the following:
Website – maceengineering.com.au
Phone – ******** 223
Email – inf******@******.au
Mace Products:
Mace Engineering can also supply products in the following categories: Air delivery, Cooling Systems, Engines & Components, Fasteners, Fuel Delivery, Gaskets & Seals, Gauges & Accessories, Ignition & Electrical, Suspension, and Tools & Equipment. Please feel free to contact us if you are looking for a part from the aforementioned categories and we'll do our best to help out.
G2516
MACE LIFTER REPLACEMENT KIT TO SUIT HOLDEN LS1 5.7L V8 FROM 10/2003
Vehicle Fitment: Adventra VY VZ, Calais VY VZ, Caprice WK WL, Commodore VY VZ, Crewman VY VZ, Monaro V2 VZ, One Tonner VY VZ, Statesman WK WL
For further details, please refer to the vehicle fitment guide in the above images.
Part Number: SPG842
Mace lifter replacement kit comprises of hydraulic roller lifters, lifter trays, head gaskets and head bolts. This kit suits Holden Commodores and similar platforms fitted with the LS1 from 10/2003.
The Genuine GM high performance hydraulic roller lifters are an upgrade for factory lifters with refined durability and performance. These are a performance replacement for stock hydraulic roller lifters, are preloaded and have to be installed between 3/8 and 3/4 turn (vs. 1/2 to 1.5 turns on stock lifters).
The Genuine GM OE replacement LS lifter tray/guide set included in the kit is specifically designed to hold the lifters in place and keep them from rotating. These guides with side grooves can accommodate four valve lifters in each and a total of four guides, is required for an engine.
The Genuine GM MLS (Multi-Layer Steel) head gasket set is a perfect fit for both stock and mildly modified engines. These gaskets feature 3 layered stainless steel faces.
ARP produces fasteners from a wide combination of materials going from famous hardened steel and 8740 chrome moly to exotic alloys that have been created to deal with space travel. 8740 chrome moly used in the head bolt kit is classified as a quench and temper steel, that can be heat-treated to provide tensile strengths between 180,000 and 210,000 psi. The head bolt kit comes complete with hardened washers and high-strength hex nuts.
Gasket Specifications:
- Gasket material: Multilayer steel (MLS)
- Maximum bore size: 3.920"
- Compressed thickness: 0.051"
- GM part number: ****8544
Contents:
- 01 X MLS cylinder head gasket set
- 01 X Fastener assembly lubricant
- 04 X GM Lifter tray/guide
- 10 X Short cylinder head bolt (M8 x 1.25 x 45)
- 16 X Hydraulic roller lifter
- 20 X Long cylinder head bolt (M11 x 2.00 x 100)
- 30 X Washers to suit different size bolts
Notes:
- The image is for illustrative purposes only.
- Lifter replacement kit for LS1 till 09/2003 can be purchased through another listing.
- Please follow the torque specifications as recommended by the service manual.
- The hydraulic roller lifters, lifter trays, head gaskets and head bolts can be separately purchased through other listings.
***Please note that all items include free delivery Australia wide***
Contact us directly through Gumtree and we’ll be more than happy to help you out.
Alternatively, you can contact us on the following:
Website – maceengineering.com.au
Phone – ******** 223
Email – inf******@******.au
Mace Products:
Mace Engineering can also supply products in the following categories: Air delivery, Cooling Systems, Engines & Components, Fasteners, Fuel Delivery, Gaskets & Seals, Gauges & Accessories, Ignition & Electrical, Suspension, and Tools & Equipment. Please feel free to contact us if you are looking for a part from the aforementioned categories and we'll do our best to help out.
G2516
- Date Listed:18/01/2021
- Last Edited:21/03/2023
- Condition:New
- Warranty:Yes
- Model:Other
- Make:Holden
Similar Ads
- AFM DOD Lifter Bucket Kit Holden VE VF V8 6.0L L77This is a full kit of lifters and buckets for the AFM motors!Kit includes: 8 DOD/AFM GM Lifters, 8 Standard GM LS7 Lifters, and 4 Lifter Guide Trays Replaces: ****9256, ****1595, ****9820, ****9516, HL177, HL178No Warranty: These lifters do not come with any kind of warranty due to the fact that the DOD/AFM system often fails which in return causes the lifters to fail. We highly recommend switching to a traditional Lifter with one of our complete DOD/AFM Lifter Delete Kits AFM DOD Lifter$700Hallam, VIC•94w
- Genuine Holden 253-304-308 v8 full set 16 New Hydraulic LiftersGenuine Holden 253-304-308 v8 full set new NOS of 16 hydraulic lifters to suit red motor-blue motor-black motor-efi-carby engines $100.......Pick up from St Albans in Melbourne Western Suburbs or Can Post Australia Wide for $13............HAVE A LOOK AT MY OTHER LISTINGS AS I HAVE MANY MANY MORE HOLDEN PARTS & CAN DO COMBINED POSTAGE....................................................................................................................................................................$100St Albans, VIC•11w
- Holden 304, 308 355, LS Hydraulic Roller Lifters (Morel)Brand new Morel Hydraulic Roller lifters Purchased for holden 5 litre build, however will cover LS engines as well These lifters will fit VN (depending on camshaft) and VT blocks, as well as LS Only pulled one lifter out of packaging to test with cam in block (refer pic) Other than that these are NEW Had to change specification as cam changed Save some $ van post approx. $15 Australian wide Pics: 1. There is comparison between Morel HR lifter and GMH holden Hydraulic flat tappet lifter 2.$710Mount Martha, VIC•12w
- HOLDEN TRAX TJ SERIES 08/2013-09/2016 AUTOMATIC TRANSMISSION PETROL 1.DESCRIPTION TRAX******2014 HOLDEN TRAX 1.8L Petrol TRANS/GEARBOX QUICK SPECS - Manufacturer: HOLDEN - Model: TRAX - Fuel Type: Petrol - Mileage: 10,144 Kms - BHP: 0.00 - Engine Capacity: 1800 cc, 4 Cyl - Engine Code: F18D4 - Style: Station Wagon - Speed: 6 Speed Automatic - Paint Code: Grey - VIN Number: KL3BA7659EB545109 - Grade: LS - Stock Number: ****0113 - Tag Number: 0000004156 - Trim: Above Average - Year: 2014 - Radio: Unknown - ABS: Unknown - AIR CON: Unknown - Fitment: TRAX 2013 - 20$926Sunshine West, VIC•5d
- Aluminum FAN SHROUD WITH FANS for Holden Commodore VZ LS1 LS2 SS V8 ATAluminum FAN SHROUD WITH FANS for Holden Commodore VZ LS1 LS2 SS V8 AT/MT 20 Dimensions:670(L)*415(H)mm Payment: Paypal, Pickup by Cash, Pay to our bank account, Pay on the phone by Credit Card. Brand New In Box Welcome to pick up from Melbourn Warehouse. Free shipping to most areas in Australia. Ship to NT, Remote WA & Regional QLD areas may need extra charge. Customers hold full responsibility to provide valid delivery information before making payment. Custome$130Hoppers Crossing, VIC•198w
- Radiator for Holden Commodore VY SS 5.7L GEN 3 V8 LS1 02-04Aluminum Radiator for Holden Commodore VY SS 5.7L GEN 3 V8 LS1******2004 1Core 26mm Core size: 675*428*26mm, Overall: 785*443*50mm, I/O: 35/35mm Payment: Paypal, Pickup by Cash, Pay to our bank account, Pay on the phone by Credit Card. Brand New In Box Welcome to pick up from Melbourn Warehouse. Free shipping to most areas in Australia. Ship to NT, Remote WA & Regional QLD areas may need extra charge. Customers hold full responsibility to provide valid delivery informatio$170Hoppers Crossing, VIC•204w
- Holden ACL Banjo Diff & Axles Drain Plug Gasket KitHolden ACL hj142 Banjo 1 x Diff Centre Gasket & 4 Axles Gaskets & 1 x Drain Plug Washer $30...... to suit Holden fx-fj-fe-fc-fb-fc-ek-ej-eh-hd-hr-hk-ht-hg-hq-hj-hx-hz.....Torana hb-lc-lj-ta-lh-lx these Gaskets are quality ACL that are made in Australia ......Pick up from St Albans in Melbourne Western Suburbs or Can Post Australia Wide for $7.........Ph:.............HAVE A LOOK AT MY OTHER LISTINGS AS I HAVE MANY MANY MORE HOLDEN PARTS AND CAN DO COMBINED POSTAGE......................$30St Albans, VIC•42w
- Cammed manual vz ssManual vz ss 5.7 313xxx but all work done in the last 5000kms Freshly resprayed Cammed 280kw Gm street racer cam with supporting mods, ls7 lifters, valve springs, pushrods, oil pump etc Bigger fuel pump, bigger injectors 3.9 trutrac diff Gm rip shifter Reco gearbox not even 10,000ks old New starter motor, new genuine alternator, new power steering pump and high pressure power steering line Vcm otr 2.5 inch force exhaust, has rear muffler and also comes with rear muffler delete Have lots of rec$21,000NegotiableHoppers Crossing, VIC•3w
- Holden Commodore Supercharger - Valley KitHolden Commodore Supercharger kit - LS3 L98 L76 (and LS1 With required Adaptors) Intercooled ready Yella Terra - Whipple Valley Kit Give you around 60% power to the rear Was run on a 6.0L VE Commodore SS for about three years as a daily driver. Kit has been cleaned and re-assembled with new sealant and o-rings - I’m only selling it because I’m upgrading to a new Gen5 unit. Kit will fit under bonnet on all early VT-VZ body shaped Commodores and later VE - VF LS3 Commodores. The 6Rib drive pl$5,500Clayton South, VIC•3d
- HOLDEN TRAX TJ SERIES 08/2013-12/2020 ENGINE 1.8L PETROL**Note:** Please call to discuss shipping prices. - Manufacturer: HOLDEN - Model: TRAX - Fuel Type: Petrol - Mileage: 10144 Kms - BHP: 0.00 - Engine Capacity: 1800 cc - Engine: 4 Cyl - Engine Code: F18D4 - Style: Station Wagon - Speed: 6 Speed Automatic - Paint Code: Grey - VIN Number: KL3BA7659EB545109 - Grade: Above Average - Stock Number: ****0113 - Tag Number: 0000004111 - Trim: LS - Year: 2014 - Radio: Unknown - ABS: Unknown - AIR CON: Unknown - Fitment: TRAX 2013 - 2020 PETROL, 1.8, TJ S$1,845Sunshine West, VIC•7w
- 2 X BALL JOINT FOR TOYOTA BUICK L27 1GRFE 2GRFE 2GRFKS 3MZFE 5VZFE V6MACE ENGINEERING GROUP PAIR OF WASP BALL JOINTS TO SUIT TOYOTA BUICK LN3 L27 3VZ-E 3VZ-FE 1MZ-FE 3MZ-FE 5VZ-FE 1GR-FE 2GR-FE 2GR-FKS 3.0L 3.3L 3.4L 3.5L 3.8L 4.0L V6 Vehicle Fitment: 4Runner VZN130R, Aurion GSV40R GSV50R, Alphard MNH10R MNH15R, Avalon MCX10R, Camry VCV10R VDV10R MCV20R MCV36R GSV70R, Estima MCR30R MCR40R GSR50R GSR55R, FJ Cruiser, GSJ15R, Granvia VCH10R VCH16R, HiLux VZN130R VZN167R VZN172R GGN15R GGN25R GGN120R GGN125R, Harrier MCU10R MCU15R MCU35R, Kluger MCU28R GSU40R GSU45R$70Melbourne CBD, VIC•4w
- 2 X BALL JOINT FOR TOYOTA 5S-FE 3S-FE 3S-GE 3S-GTE 1GD-FTV 1KD-FTV I4MACE ENGINEERING GROUP PAIR OF WASP FRONT BALL JOINTS TO SUIT HOLDEN T1KZ-TE 2AZ-FE 2AR-FE 2AR-FXE A25A-FXS 5S-FE 3S-FE 3S-GE 3S-GTE 4A-FE 7A-FE 7A-FET 1ZZ-FE 2ZZ-GE M20A-FKS 2ZR-FXE 2ZR-FE 3ZR-FE 1NZ-FE 2NZ-FE 8NR-FTS 2Y 3Y 3Y-E 3Y-J 4Y 4Y-E 22R 1RZ-E 2RZ 2RZ-E 3RZ-FE L 2L 2L-T 2L-TE 3L 5L 5L-E 1TR-FE 2TR-FE 2KD-FTV 1GD-FTV 1KD-FTV 2GD-FTV 1NZ-FXE 1AZ-FE 2AD-FTV 2AD-FHV TURBO DIESEL 1.2L 1.3L 1.5L 1.6L 1.8L 2.0L 2.2L 2.4L 2.5L 2.7L 2.8L 3.0L I4 Vehicle Fitment: 4Runner YN63R LN61R RN130R YN130$56Melbourne CBD, VIC•4w
- BALL JOINTS FOR HOLDEN 307 327 253 308 350 LS1 L76 L98 304 STROKER V8MACE ENGINEERING GROUP PAIR OF WASP BALL JOINTS FOR HOLDEN LS1 L76 L98 33 308 350 STROKER 4.1L 5.0L 5.4L 5.7L 6.0L V8 Vehicle Fitment: Adventra VY VZ, Belmont HK HT HG HQ HJ HX, Brougham HK HT HG, Calais VK VL VN VP VS WH VZ, Caprice VS VQ WH WK WL, Commodore VB VC VH VK VL VN VG VP VT VT.II VU VX VY VZ, Crewman VY VZ, Gts HZ, Kingswood HK HT HG HQ HJ HX HZ WB, Monaro HK HT HG HQ HJ HX HZ V2 VZ, One Tonner HQ HJ HX HZ WB VY, Premier HK HT HG HQ HJ HX HZ, Statesman HQ HJ HX HZ WB VQ$60Melbourne CBD, VIC•4w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 223