96 views
MACE LIFTER REPLACEMENT KIT FOR HSV LS1 5.7L V8 FROM 10/2003
$920
MACE ENGINEERING GROUP
MACE LIFTER REPLACEMENT KIT TO SUIT HSV LS1 5.7L V8 FROM 10/2003
Vehicle Fitment: Avalanche VY VZ, ClubSport VY, Coupe V2 VZ, Grange WK, GTS VY, Maloo VY, Senator VY
For further details, please refer to the vehicle fitment guide in the above images.
Part Number: SPG845
Mace lifter replacement kit comprises of hydraulic roller lifters, lifter trays, head gaskets and head bolts. This kit suits HSV vehicles fitted with the LS1 from 10/2003.
The Genuine GM high performance hydraulic roller lifters are an upgrade for factory lifters with refined durability and performance. These are a performance replacement for stock hydraulic roller lifters, are preloaded and have to be installed between 3/8 and 3/4 turn (vs. 1/2 to 1.5 turns on stock lifters).
The Genuine GM OE replacement LS lifter tray/guide set included in the kit is specifically designed to hold the lifters in place and keep them from rotating. These guides with side grooves can accommodate four valve lifters in each and a total of four guides, is required for an engine.
The Genuine GM MLS (Multi-Layer Steel) head gasket set is a perfect fit for both stock and mildly modified engines. These gaskets feature 3 layered stainless steel faces.
ARP produces fasteners from a wide combination of materials going from famous hardened steel and 8740 chrome moly to exotic alloys that have been created to deal with space travel. 8740 chrome moly used in the head bolt kit is classified as a quench and temper steel, that can be heat-treated to provide tensile strengths between 180,000 and 210,000 psi. The head bolt kit comes complete with hardened washers and high-strength hex nuts.
Gasket Specifications:
- Gasket material: Multilayer steel (MLS)
- Maximum bore size: 3.920"
- Compressed thickness: 0.051"
- GM part number: 124 985 44
Contents:
- 01 X MLS cylinder head gasket set
- 01 X Fastener assembly lubricant
- 04 X GM Lifter tray/guide(GM*****5365)
- 10 X Short cylinder head bolt (M8 x 1.25 x 45)
- 16 X Hydraulic roller lifter(GM:****2490)
- 20 X Long cylinder head bolt (M11 x 2.00 x 100)
- 30 X Washers to suit different size bolts
Notes:
- The image is for illustrative purposes only.
- Lifter replacement kit for LS1 till 09/2003 can be purchased through another listing.
- Please follow the torque specifications as recommended by the service manual.
- The hydraulic roller lifters, lifter trays, head gaskets and head bolts can be separately purchased through other listings.
***Please note that all items include free delivery Australia wide***
Contact us directly through Gumtree and we’ll be more than happy to help you out.
Alternatively, you can contact us on the following:
Website – maceengineering.com.au
Phone – ******** 223
Email – inf******@******.au
Terms of Warranty:
Customer must have at least 1 proof of purchase whether it is an invoice, confirmation of payment email or payment related receipt (paypal, bank statement, credit card statement. Contact us if you are looking for a part from the aforementioned categories and we wil do our best to help out.
G2532
MACE LIFTER REPLACEMENT KIT TO SUIT HSV LS1 5.7L V8 FROM 10/2003
Vehicle Fitment: Avalanche VY VZ, ClubSport VY, Coupe V2 VZ, Grange WK, GTS VY, Maloo VY, Senator VY
For further details, please refer to the vehicle fitment guide in the above images.
Part Number: SPG845
Mace lifter replacement kit comprises of hydraulic roller lifters, lifter trays, head gaskets and head bolts. This kit suits HSV vehicles fitted with the LS1 from 10/2003.
The Genuine GM high performance hydraulic roller lifters are an upgrade for factory lifters with refined durability and performance. These are a performance replacement for stock hydraulic roller lifters, are preloaded and have to be installed between 3/8 and 3/4 turn (vs. 1/2 to 1.5 turns on stock lifters).
The Genuine GM OE replacement LS lifter tray/guide set included in the kit is specifically designed to hold the lifters in place and keep them from rotating. These guides with side grooves can accommodate four valve lifters in each and a total of four guides, is required for an engine.
The Genuine GM MLS (Multi-Layer Steel) head gasket set is a perfect fit for both stock and mildly modified engines. These gaskets feature 3 layered stainless steel faces.
ARP produces fasteners from a wide combination of materials going from famous hardened steel and 8740 chrome moly to exotic alloys that have been created to deal with space travel. 8740 chrome moly used in the head bolt kit is classified as a quench and temper steel, that can be heat-treated to provide tensile strengths between 180,000 and 210,000 psi. The head bolt kit comes complete with hardened washers and high-strength hex nuts.
Gasket Specifications:
- Gasket material: Multilayer steel (MLS)
- Maximum bore size: 3.920"
- Compressed thickness: 0.051"
- GM part number: 124 985 44
Contents:
- 01 X MLS cylinder head gasket set
- 01 X Fastener assembly lubricant
- 04 X GM Lifter tray/guide(GM*****5365)
- 10 X Short cylinder head bolt (M8 x 1.25 x 45)
- 16 X Hydraulic roller lifter(GM:****2490)
- 20 X Long cylinder head bolt (M11 x 2.00 x 100)
- 30 X Washers to suit different size bolts
Notes:
- The image is for illustrative purposes only.
- Lifter replacement kit for LS1 till 09/2003 can be purchased through another listing.
- Please follow the torque specifications as recommended by the service manual.
- The hydraulic roller lifters, lifter trays, head gaskets and head bolts can be separately purchased through other listings.
***Please note that all items include free delivery Australia wide***
Contact us directly through Gumtree and we’ll be more than happy to help you out.
Alternatively, you can contact us on the following:
Website – maceengineering.com.au
Phone – ******** 223
Email – inf******@******.au
Terms of Warranty:
Customer must have at least 1 proof of purchase whether it is an invoice, confirmation of payment email or payment related receipt (paypal, bank statement, credit card statement. Contact us if you are looking for a part from the aforementioned categories and we wil do our best to help out.
G2532
- Date Listed:25/03/2021
- Last Edited:24/11/2023
- Condition:New
- Warranty:Yes
- Model:Other
- Make:HSV
Similar Ads
- AFM DOD Lifter Bucket Kit Holden VE VF V8 6.0L L77This is a full kit of lifters and buckets for the AFM motors!Kit includes: 8 DOD/AFM GM Lifters, 8 Standard GM LS7 Lifters, and 4 Lifter Guide Trays Replaces: ****9256, ****1595, ****9820, ****9516, HL177, HL178No Warranty: These lifters do not come with any kind of warranty due to the fact that the DOD/AFM system often fails which in return causes the lifters to fail. We highly recommend switching to a traditional Lifter with one of our complete DOD/AFM Lifter Delete Kits AFM DOD Lifter$700Hallam, VIC•94w
- Genuine Holden 253-304-308 v8 full set 16 New Hydraulic LiftersGenuine Holden 253-304-308 v8 full set new NOS of 16 hydraulic lifters to suit red motor-blue motor-black motor-efi-carby engines $100.......Pick up from St Albans in Melbourne Western Suburbs or Can Post Australia Wide for $13............HAVE A LOOK AT MY OTHER LISTINGS AS I HAVE MANY MANY MORE HOLDEN PARTS & CAN DO COMBINED POSTAGE....................................................................................................................................................................$100St Albans, VIC•12w
- Holden 304, 308 355, LS Hydraulic Roller Lifters (Morel)Brand new Morel Hydraulic Roller lifters Purchased for holden 5 litre build, however will cover LS engines as well These lifters will fit VN (depending on camshaft) and VT blocks, as well as LS Only pulled one lifter out of packaging to test with cam in block (refer pic) Other than that these are NEW Had to change specification as cam changed Save some $ van post approx. $15 Australian wide Pics: 1. There is comparison between Morel HR lifter and GMH holden Hydraulic flat tappet lifter 2.$710Mount Martha, VIC•12w
- VS Hydraulic manual pedal boxHolden commodore VS hydraulic manual pedal box. Needs bushes and spring on clutch pedal, $50 new on eBay and available. Suitable for VN VP VQ VR VS SS Calais Berlina bt1 hsv clubsport senator gts Maloo sv89 sv5000 with getrag gearbox or when doing LS swap with T56 or tr6060. Priced cheap, as you need to spend the $50 on the spring and bush kit off eBay or resto country $450 Pick up Melton VIC Can post Aus wide$450Melton, VIC•34w
- Holden Trimatic-Aussie 4sp-3spd Manual 21 Teeth Green Speedo GearGenuine Holden Trimatic Automatic transmission-Aussie 4 speed M20-M21-M22-3 speed manual brand new NOS 21 Teeth Green speedo Gear/Cog....$50.FIRM......Pick up from St Albans in Melbourne Western Suburbs or Can Post Australia Wide for $9......Ph:.........HAVE A LOOK THROUGH MY OTHER LISTINGS AS I HAVE MANY MANY MORE HOLDEN PARTS & CAN DO COMBINED POSTAGE......................................................................................................................................$50St Albans, VIC•10w
- Cammed manual vz ssManual vz ss 5.7 313xxx but all work done in the last 5000kms Freshly resprayed Cammed 280kw Gm street racer cam with supporting mods, ls7 lifters, valve springs, pushrods, oil pump etc Bigger fuel pump, bigger injectors 3.9 trutrac diff Gm rip shifter Reco gearbox not even 10,000ks old New starter motor, new genuine alternator, new power steering pump and high pressure power steering line Vcm otr 2.5 inch force exhaust, has rear muffler and also comes with rear muffler delete Have lots of rec$21,000NegotiableHoppers Crossing, VIC•3w
- VF LS3 6.2L V8 Engine and TR6060 trans only 71k L98 L77 LS2 VE HSVComplete LS3 conversion with a TR6060 6 speed manual transmission from a VF series 2 SSV Redline with only 71k on the clock. video of engine running is here: https://youtu.be/ju_gocJRqmA?si=J3c5wjnarGkjt_e- Comes with all accessory’s, engine wiring loom, ECU, pedal box assembly and tail shaft (Please note, cats are not included in the sale) If you require other parts for your conversion please contact me as we can negotiate that as well. It will be palletised, strapped and shrink wrapped i$16,000Keilor, VIC•5w
- HOLDEN TRAX TJ SERIES 08/2013-09/2016 AUTOMATIC TRANSMISSION PETROL 1.DESCRIPTION TRAX******2014 HOLDEN TRAX 1.8L Petrol TRANS/GEARBOX QUICK SPECS - Manufacturer: HOLDEN - Model: TRAX - Fuel Type: Petrol - Mileage: 10,144 Kms - BHP: 0.00 - Engine Capacity: 1800 cc, 4 Cyl - Engine Code: F18D4 - Style: Station Wagon - Speed: 6 Speed Automatic - Paint Code: Grey - VIN Number: KL3BA7659EB545109 - Grade: LS - Stock Number: ****0113 - Tag Number: 0000004156 - Trim: Above Average - Year: 2014 - Radio: Unknown - ABS: Unknown - AIR CON: Unknown - Fitment: TRAX 2013 - 20$926Sunshine West, VIC•6d
- Holden / Hsv Ls partsHolden / Hsv Parts All parts fairly new with a few months New fuel rails with parts - $110 Ls catch can with hoses / bolts - $90 K&N otr filter good condition - $60 Stock Ls throttle body - $60 3.5t tow bar with bolts - $70 Vt-vx window switches x3 - $50 A few rubber hoses and spare caps Was used in my Vx ss Ls1 before the motor was rebuild 👍 Pick up Lynbrook / Victoria$90Lynbrook, VIC•14w
- Holden v8 LS1 and LS3 starter motors ve vf commodore hsvTo suit LS1 ls3 off ve and vf HSV Price is 120 for LS1 200 for ls3 Happy to post$120Keilor Downs, VIC•264w
- 2 X BALL JOINT FOR TOYOTA BUICK L27 1GRFE 2GRFE 2GRFKS 3MZFE 5VZFE V6MACE ENGINEERING GROUP PAIR OF WASP BALL JOINTS TO SUIT TOYOTA BUICK LN3 L27 3VZ-E 3VZ-FE 1MZ-FE 3MZ-FE 5VZ-FE 1GR-FE 2GR-FE 2GR-FKS 3.0L 3.3L 3.4L 3.5L 3.8L 4.0L V6 Vehicle Fitment: 4Runner VZN130R, Aurion GSV40R GSV50R, Alphard MNH10R MNH15R, Avalon MCX10R, Camry VCV10R VDV10R MCV20R MCV36R GSV70R, Estima MCR30R MCR40R GSR50R GSR55R, FJ Cruiser, GSJ15R, Granvia VCH10R VCH16R, HiLux VZN130R VZN167R VZN172R GGN15R GGN25R GGN120R GGN125R, Harrier MCU10R MCU15R MCU35R, Kluger MCU28R GSU40R GSU45R$70Melbourne CBD, VIC•4w
- 2 X BALL JOINT FOR TOYOTA 5S-FE 3S-FE 3S-GE 3S-GTE 1GD-FTV 1KD-FTV I4MACE ENGINEERING GROUP PAIR OF WASP FRONT BALL JOINTS TO SUIT HOLDEN T1KZ-TE 2AZ-FE 2AR-FE 2AR-FXE A25A-FXS 5S-FE 3S-FE 3S-GE 3S-GTE 4A-FE 7A-FE 7A-FET 1ZZ-FE 2ZZ-GE M20A-FKS 2ZR-FXE 2ZR-FE 3ZR-FE 1NZ-FE 2NZ-FE 8NR-FTS 2Y 3Y 3Y-E 3Y-J 4Y 4Y-E 22R 1RZ-E 2RZ 2RZ-E 3RZ-FE L 2L 2L-T 2L-TE 3L 5L 5L-E 1TR-FE 2TR-FE 2KD-FTV 1GD-FTV 1KD-FTV 2GD-FTV 1NZ-FXE 1AZ-FE 2AD-FTV 2AD-FHV TURBO DIESEL 1.2L 1.3L 1.5L 1.6L 1.8L 2.0L 2.2L 2.4L 2.5L 2.7L 2.8L 3.0L I4 Vehicle Fitment: 4Runner YN63R LN61R RN130R YN130$56Melbourne CBD, VIC•4w
- BALL JOINTS FOR HOLDEN 307 327 253 308 350 LS1 L76 L98 304 STROKER V8MACE ENGINEERING GROUP PAIR OF WASP BALL JOINTS FOR HOLDEN LS1 L76 L98 33 308 350 STROKER 4.1L 5.0L 5.4L 5.7L 6.0L V8 Vehicle Fitment: Adventra VY VZ, Belmont HK HT HG HQ HJ HX, Brougham HK HT HG, Calais VK VL VN VP VS WH VZ, Caprice VS VQ WH WK WL, Commodore VB VC VH VK VL VN VG VP VT VT.II VU VX VY VZ, Crewman VY VZ, Gts HZ, Kingswood HK HT HG HQ HJ HX HZ WB, Monaro HK HT HG HQ HJ HX HZ V2 VZ, One Tonner HQ HJ HX HZ WB VY, Premier HK HT HG HQ HJ HX HZ, Statesman HQ HJ HX HZ WB VQ$60Melbourne CBD, VIC•4w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 223