30 views
MACE LOWER MANIFOLD INSULATOR HOLDEN RB30E RB30ET 3.0L I6
$145
MACE ENGINEERING GROUP
MACE PERFORMANCE LOWER MANIFOLD INSULATOR TO SUIT HOLDEN RB30E RB30ET 3.0L I6
Vehicle Fitment: Calais VL, Commodore VL
For further details, please refer to the vehicle fitment guide in the above image.
Part Number: MI607 (Out of stock)
Exclusive to Mace Engineering, here we have our design-registered lower manifold insulators to suit the Holden VL Commodore fitted with an RB30 3.0L 6 cylinder engine. Compatible with both turbo and non-turbo engines.
What are manifold insulators and what do they do?
Manifold insulators are a thermal insulating spacer that mount between your engine block and intake manifold. Made from a heat blocking composite, our manifold insulators will increase power from your engine by keeping the intake cooler, and increase low end torque by increasing runner length.
But how do manifold insulators keep the intake manifold cooler?
Given our manifold insulators are made from a composite material with a thermal conductivity of 0.29 W/m*K as opposed to aluminium, which has a thermal conductivity of 150 W/m*K; The difference works about to be that aluminium conducts heat 500 times higher than our composite material!
Also, with gaskets often made out of steel (thermal conductivity of 20 W/m-K) placed between the upper and lower manifolds being 0.5mm thick, replacing them with a 12mm manifold insulator will conduct an amazing 1655 times less heat.
Our composite material also exhibits high stiffness and compressive strength, can withstand temperatures up to nearly 150°C, and has a thermal expansion coefficient very similar to aluminium to increase sealing capabilities. In addition, the spacer can also withstand boosted conditions with ease.
Key Benefits:
- Design registered.
- Reduces charge air temperature resulting in better power consistency and detonation prevention.
- Power increase with no undesirable side effects.
- Improved low end torque by increasing runner length.
- Improved fuel economy.
- Easy to install.
- Can be used as a replacement gasket.
- Reusable.
- Proven gains at an affordable price.
Contents:
- 1 X Pair of 12mm manifold insulator
Note: Depending on the inlet manifold type, these manifold insulators may require longer manifold bolts for installation.
***Please note that all items include free delivery Australia wide***
Contact us directly through Gumtree and we’ll be more than happy to help you out.
Alternatively, you can contact us on the following:
Website – maceengineering.com.au
Phone – ******** 223 click to reveal
Email – inf******@******.au click to reveal
G247
MACE PERFORMANCE LOWER MANIFOLD INSULATOR TO SUIT HOLDEN RB30E RB30ET 3.0L I6
Vehicle Fitment: Calais VL, Commodore VL
For further details, please refer to the vehicle fitment guide in the above image.
Part Number: MI607 (Out of stock)
Exclusive to Mace Engineering, here we have our design-registered lower manifold insulators to suit the Holden VL Commodore fitted with an RB30 3.0L 6 cylinder engine. Compatible with both turbo and non-turbo engines.
What are manifold insulators and what do they do?
Manifold insulators are a thermal insulating spacer that mount between your engine block and intake manifold. Made from a heat blocking composite, our manifold insulators will increase power from your engine by keeping the intake cooler, and increase low end torque by increasing runner length.
But how do manifold insulators keep the intake manifold cooler?
Given our manifold insulators are made from a composite material with a thermal conductivity of 0.29 W/m*K as opposed to aluminium, which has a thermal conductivity of 150 W/m*K; The difference works about to be that aluminium conducts heat 500 times higher than our composite material!
Also, with gaskets often made out of steel (thermal conductivity of 20 W/m-K) placed between the upper and lower manifolds being 0.5mm thick, replacing them with a 12mm manifold insulator will conduct an amazing 1655 times less heat.
Our composite material also exhibits high stiffness and compressive strength, can withstand temperatures up to nearly 150°C, and has a thermal expansion coefficient very similar to aluminium to increase sealing capabilities. In addition, the spacer can also withstand boosted conditions with ease.
Key Benefits:
- Design registered.
- Reduces charge air temperature resulting in better power consistency and detonation prevention.
- Power increase with no undesirable side effects.
- Improved low end torque by increasing runner length.
- Improved fuel economy.
- Easy to install.
- Can be used as a replacement gasket.
- Reusable.
- Proven gains at an affordable price.
Contents:
- 1 X Pair of 12mm manifold insulator
Note: Depending on the inlet manifold type, these manifold insulators may require longer manifold bolts for installation.
***Please note that all items include free delivery Australia wide***
Contact us directly through Gumtree and we’ll be more than happy to help you out.
Alternatively, you can contact us on the following:
Website – maceengineering.com.au
Phone – ******** 223 click to reveal
Email – inf******@******.au click to reveal
G247
- Date Listed:17/08/2017
- Last Edited:06/07/2023
- Condition:New
- Warranty:Yes
- Make:Holden
Similar Ads
- TCK175A- TIMING BELT KIT FOR HOLDEN CALAIS AND COMMODORE VLTCK175A- TIMING BELT KIT HOLDEN CALAIS VL (03/1986 TO 08/1988) PETROL 3.0L RB30E (LF1) /3.0L RB30ET (LW5) HOLDEN COMMODORE (03/1986 TO 08/1988) PETROL 3.0L RB30ET (LW5) /3.0L RB30E (LF1) NISSAN PATROL (1989 TO 01/1997) PETROL 3.0L RB30 TIMING BELT KIT INCLUDING: 1 X TIMING BELT 1 X TENSIONER PULLY PART NO: TCK175A$85Sunshine North, VIC•219w
- Nissan skyline rb25 intake manifold and injectorsUpper and lower section with injectors to suit skyline r32 r33 900 for top and bottom won't come with wiring or injectors can come with them for extra$900Keilor Downs, VIC•225w
- SPP Performance RB30 Plenum Intake ManifoldSPP performance Rb30 turbo intake manifold. Suit vl commodore or skyline .. was intended to go on my vl but went different direction. pick up pakenham.$500Pakenham, VIC•2w
- nissan RB26 genuine standard head gasket brand newbrand new never used genuine nissan rb26 standard head gasket could also fit rb25 and rb30 not used due to using mls head gasket also have genuine headgasket $70 genuine nissan nok valve stem seals $50 genuine exhaust manifold gaskets sold genuine intake gaskets sold that i have not used that i will be happy to work prices out depending what is wanted and bundle it up can post at buyers expense$50NegotiableNorth Warrandyte, VIC•272w
- Nissan skyline r31 rb30 manifold suit vl commodore tooRefer to pics top section of Manifold In good condition - will not come with sensors 200$200Keilor Downs, VIC•89w
- Nissan skyline rb25 Heatshield for exhaust manifoldTo suit skyline rb25det in good condition heat shield for turbo manifold After 200 can post$200Keilor Downs, VIC•289w
- Nissan skyline rb25 turbo manifold exhaustTo suit rb25det motor can suit skyline and Silvia if they are running rb25 Chasing 250 for manifold can post$250Keilor Downs, VIC•289w
- Holden Rb30 engine coversVarious holden rb30 engine covers $150 each$150Melbourne CBD, VIC•4w
- CROSSFIRE DP550 - HOLDEN COMMODORE VL RB30 VALVE REGRIND SETCROSSFIRE XDP550 - HOLDEN COMMODORE VL RB30 VALVE REGRIND SET$70Sunshine North, VIC•270w
- GTR RB26 HYPERTUNE V2 PLENUMITEMS ARE BRAND ONLY TEST FITTED GO DIFFERENT SETUP Hypertune v2 dbw plenum 6 injectors inc 84mm bosch dbw thottle body prp coolant manifold silicon hose to suit factory raditator Will suit r32 r33 r34 gtr rb26 only Cost over $4400 Happy to freight$3,100Hallam, VIC•25w
- 2 X BALL JOINT FOR TOYOTA BUICK L27 1GRFE 2GRFE 2GRFKS 3MZFE 5VZFE V6MACE ENGINEERING GROUP PAIR OF WASP BALL JOINTS TO SUIT TOYOTA BUICK LN3 L27 3VZ-E 3VZ-FE 1MZ-FE 3MZ-FE 5VZ-FE 1GR-FE 2GR-FE 2GR-FKS 3.0L 3.3L 3.4L 3.5L 3.8L 4.0L V6 Vehicle Fitment: 4Runner VZN130R, Aurion GSV40R GSV50R, Alphard MNH10R MNH15R, Avalon MCX10R, Camry VCV10R VDV10R MCV20R MCV36R GSV70R, Estima MCR30R MCR40R GSR50R GSR55R, FJ Cruiser, GSJ15R, Granvia VCH10R VCH16R, HiLux VZN130R VZN167R VZN172R GGN15R GGN25R GGN120R GGN125R, Harrier MCU10R MCU15R MCU35R, Kluger MCU28R GSU40R GSU45R$70Melbourne CBD, VIC•5w
- 2 X BALL JOINT FOR TOYOTA 5S-FE 3S-FE 3S-GE 3S-GTE 1GD-FTV 1KD-FTV I4MACE ENGINEERING GROUP PAIR OF WASP FRONT BALL JOINTS TO SUIT HOLDEN T1KZ-TE 2AZ-FE 2AR-FE 2AR-FXE A25A-FXS 5S-FE 3S-FE 3S-GE 3S-GTE 4A-FE 7A-FE 7A-FET 1ZZ-FE 2ZZ-GE M20A-FKS 2ZR-FXE 2ZR-FE 3ZR-FE 1NZ-FE 2NZ-FE 8NR-FTS 2Y 3Y 3Y-E 3Y-J 4Y 4Y-E 22R 1RZ-E 2RZ 2RZ-E 3RZ-FE L 2L 2L-T 2L-TE 3L 5L 5L-E 1TR-FE 2TR-FE 2KD-FTV 1GD-FTV 1KD-FTV 2GD-FTV 1NZ-FXE 1AZ-FE 2AD-FTV 2AD-FHV TURBO DIESEL 1.2L 1.3L 1.5L 1.6L 1.8L 2.0L 2.2L 2.4L 2.5L 2.7L 2.8L 3.0L I4 Vehicle Fitment: 4Runner YN63R LN61R RN130R YN130$56Melbourne CBD, VIC•5w
- BALL JOINTS FOR HOLDEN 307 327 253 308 350 LS1 L76 L98 304 STROKER V8MACE ENGINEERING GROUP PAIR OF WASP BALL JOINTS FOR HOLDEN LS1 L76 L98 33 308 350 STROKER 4.1L 5.0L 5.4L 5.7L 6.0L V8 Vehicle Fitment: Adventra VY VZ, Belmont HK HT HG HQ HJ HX, Brougham HK HT HG, Calais VK VL VN VP VS WH VZ, Caprice VS VQ WH WK WL, Commodore VB VC VH VK VL VN VG VP VT VT.II VU VX VY VZ, Crewman VY VZ, Gts HZ, Kingswood HK HT HG HQ HJ HX HZ WB, Monaro HK HT HG HQ HJ HX HZ V2 VZ, One Tonner HQ HJ HX HZ WB VY, Premier HK HT HG HQ HJ HX HZ, Statesman HQ HJ HX HZ WB VQ$60Melbourne CBD, VIC•5w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 223