87 views
DIORAMA MINIATURE DESIGN STONE SURFACE KIT - SCALE OO/HO
$35
SHIPPING OFFERED
WILL POST @ BUYERS EXPENSE FOR $10.95 WITH TRACKING PLUS INITIAL COST OF ITEM $35.00 MAKING A TOTAL COST OF $45.95
DIORAMA MINIATURE DESIGN STONE SURFACE KIT - SCALE OO/HO
STONE STENCIL PATTERN ONLY!!!!!!
HAVE TWO KIT SETS FOR SALE @ $35.00 EACH!!!!
BEFORE THE FIRST USE OF THE STENCIL PATTERN TAPE PLEASE SPRAY THE BACK OF THE TAPE WITH Eraldo Di Paolo's Adhesive Spray - NOT INCLUDED - which is selling for $6.00 @ Riot Arts & Craft Store OR A SIMILAR PRODUCT TO ENHANCE THE ADHESIVE BACKING GLUE FOR A BETTER ADHESION RESULT!!
This package of Magic Stōn contains enough material (compound-powder and stencil-tape) to cover an approximately two-square-foot area with white stone.
PLUS A GREATER AREA IF YOU CAREFULLY READ THE INSTRUCTION BELOW:
{A] Remove the temporally adhered stencil tape after applying the base coat of the Ston Stone mix as per the manufacturers instructions
[B]Carefully cleani the base coat off the face of the stencil tape with water before the base coat drys
[C] Repeat A, B & C steps for a greater area coverage.
Change the color of the stones by adding craft paint; dry brush with various colors (shades of gray or tan) for the look of limestone.
WHAT CAN I DO WITH MAGIC SYSTEMS? ... LOTS!
Magic Systems® comes in white, [ which by adding paint can be any color you wish], for making miniature diaroma stone features.
It works basically like a paint stencil, except instead of paint, you apply a powder, which has been mixed with water and P.V.A.glue. It can be colored prior to use, painted after applied, spattered with a toothbrush to give a speckled effect, sponged or dry-brushed to give an old, used effect, and so on.
Because the stencil is flexible paper it can be used around curved surfaces, as well as flat surfaces. It is easy and most importantly, fun!
Besides that it is an inexpensive method for achieving a masonry appearance. Below are just as few ideas for possible uses:
Model Train Diaroma HO/OO Scale
Building Foundation
Entire Exterior Wall Surface of Building
Sidewalks—Curved or Straight
Flower Boxes or Planters
Backyard Barbecue
Wishing Well
Low Garden Wall
Edging for Driveway
Houses
Fireplace
Chimney
Pathways & Footpaths
HOW DO I USE MAGIC SYSTEMS?
Paint the entire underlying area where you plan to apply a Magic Systems product.
This will serve as the "grout" or "mortar" for your bricks, stones, blocks, or slate. There is no need to paint if using only the stucco.
Carefully apply the stencil to the area to be covered. Make certain that the stencil is straight, level, and properly overlapped to avoid uneven lines or unsightly gaps between the rows of bricks or blocks.
Once you are happy with the lines, smooth over the stencil to make certain it makes full contact (no bubbles beneath) with the underlying area. You want to avoid getting the compound underneath the stencil.
Mix your compound using the powder, water, and a little P.V.A. glue. (This is also a good time to add any paint if you are changing the overall color of the compound.) The consistency should resemble a granular frosting or mayonnaise.
If it is too runny it will just drip down; if too thick it will be difficult to spread.
Add moisture slowly a little at a time.
Spread the compound over the stencil to a thickness of about 1/8" to 1/4" depending on scale and the look you wish to achieve.
Make sure you have a piece of stencil sticking up out from under the compound so that you can remove it later.
Allow the compound to set-up or dry partially.
DO NOT allow it to dry completely!
Slowly remove the stencil. Be careful not to pull too quickly or at odd angles so as not to remove too much compound (and your bricks or stones, etc.).
Allow the Magic Systems® to dry completely. Depending on humidity, it should take a few hours (anywhere from 6 to 24 hours).
After the compound is dry you may add additional treatments such as dry-brushing, stippling, stains, whatever combination to add more detail to suit.
DIORAMA MINIATURE DESIGN STONE SURFACE KIT - SCALE OO/HO
STONE STENCIL PATTERN ONLY!!!!!!
HAVE TWO KIT SETS FOR SALE @ $35.00 EACH!!!!
BEFORE THE FIRST USE OF THE STENCIL PATTERN TAPE PLEASE SPRAY THE BACK OF THE TAPE WITH Eraldo Di Paolo's Adhesive Spray - NOT INCLUDED - which is selling for $6.00 @ Riot Arts & Craft Store OR A SIMILAR PRODUCT TO ENHANCE THE ADHESIVE BACKING GLUE FOR A BETTER ADHESION RESULT!!
This package of Magic Stōn contains enough material (compound-powder and stencil-tape) to cover an approximately two-square-foot area with white stone.
PLUS A GREATER AREA IF YOU CAREFULLY READ THE INSTRUCTION BELOW:
{A] Remove the temporally adhered stencil tape after applying the base coat of the Ston Stone mix as per the manufacturers instructions
[B]Carefully cleani the base coat off the face of the stencil tape with water before the base coat drys
[C] Repeat A, B & C steps for a greater area coverage.
Change the color of the stones by adding craft paint; dry brush with various colors (shades of gray or tan) for the look of limestone.
WHAT CAN I DO WITH MAGIC SYSTEMS? ... LOTS!
Magic Systems® comes in white, [ which by adding paint can be any color you wish], for making miniature diaroma stone features.
It works basically like a paint stencil, except instead of paint, you apply a powder, which has been mixed with water and P.V.A.glue. It can be colored prior to use, painted after applied, spattered with a toothbrush to give a speckled effect, sponged or dry-brushed to give an old, used effect, and so on.
Because the stencil is flexible paper it can be used around curved surfaces, as well as flat surfaces. It is easy and most importantly, fun!
Besides that it is an inexpensive method for achieving a masonry appearance. Below are just as few ideas for possible uses:
Model Train Diaroma HO/OO Scale
Building Foundation
Entire Exterior Wall Surface of Building
Sidewalks—Curved or Straight
Flower Boxes or Planters
Backyard Barbecue
Wishing Well
Low Garden Wall
Edging for Driveway
Houses
Fireplace
Chimney
Pathways & Footpaths
HOW DO I USE MAGIC SYSTEMS?
Paint the entire underlying area where you plan to apply a Magic Systems product.
This will serve as the "grout" or "mortar" for your bricks, stones, blocks, or slate. There is no need to paint if using only the stucco.
Carefully apply the stencil to the area to be covered. Make certain that the stencil is straight, level, and properly overlapped to avoid uneven lines or unsightly gaps between the rows of bricks or blocks.
Once you are happy with the lines, smooth over the stencil to make certain it makes full contact (no bubbles beneath) with the underlying area. You want to avoid getting the compound underneath the stencil.
Mix your compound using the powder, water, and a little P.V.A. glue. (This is also a good time to add any paint if you are changing the overall color of the compound.) The consistency should resemble a granular frosting or mayonnaise.
If it is too runny it will just drip down; if too thick it will be difficult to spread.
Add moisture slowly a little at a time.
Spread the compound over the stencil to a thickness of about 1/8" to 1/4" depending on scale and the look you wish to achieve.
Make sure you have a piece of stencil sticking up out from under the compound so that you can remove it later.
Allow the compound to set-up or dry partially.
DO NOT allow it to dry completely!
Slowly remove the stencil. Be careful not to pull too quickly or at odd angles so as not to remove too much compound (and your bricks or stones, etc.).
Allow the Magic Systems® to dry completely. Depending on humidity, it should take a few hours (anywhere from 6 to 24 hours).
After the compound is dry you may add additional treatments such as dry-brushing, stippling, stains, whatever combination to add more detail to suit.
- Date Listed:10/11/2023
- Last Edited:10/11/2023
- Condition:New
- Shipping:Shipping & Pickup
- TINECO A10 REPLACEMENT BATTERY WITH FOUR FILTERS & FOUR HEPA FILTERSTINECO A10 HERO - REPLACEMENT BATTERY WITH FOUR PRE-FILTERS & FOUR HEPA FILTERS SPARE BATTERY X ONE PLUS FOUR PRE-FILTERS & FOUR HEPA FILTERS N.B.:- IMAGE FOUR [4] IS SHOWN FOR REFERENCE PURPOSES ONLY -- THIS ITEM IS NOT FOR SALE POSTAGE AUSTRALIA WIDE IS $15.80 EXTRA [BUYERS PAYS]$150SHIPPING OFFEREDOrmeau, QLD•2w
- 30W U-Bend Globe to suit Yard Guard 30W 71480PRODUCT INFORMATION:- Yard Guard REPLACEMENT LAMP 50x235x40mm 30W U-Shaped 4-Pin, Suit 30W Bug Zapper Replacement lamp to suit the Yard Guard 30W. Not suitable for 30W Yard Guard with screw in ESL replacement lamp.Overview o U-shaped light with 4 pins o Suits Yard Guard 30 Watt Bug Zapper o 30 watt globe Specifications :- o Contents: 1 x Yard Guard REPLACEMENT LAMP o Model Name: Yard Guard 30 Watt Globe o Model Number: 71480 o Product Dimensions (mm): W:50 H:235 L:40 o Package Dimens$20Ormeau, QLD•3w
- Vistara Swivel Gel Soft Cooling Memory Foam Circular Seat CushionVistara Swivel Gel Soft Cooling Memory Foam Circular Chair/Seat Cushion 40x8cm EXCELLENT FOR TRAVEL, HOME & OFFICE !! Experience a new level of comfort with the Vistara Swivel Gel Seat Cushion. Designed to enhance your seating experience. This cushion offers a range of features for optimal support and mobility. 360° Swivel Function:** Effortlessly move in any direction for enhanced convenience. Soft Anti-Slip Base:** Provides stability and prevents unwanted sliding. Weight Capacity:** S$39Ormeau, QLD•3w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 2745