397 views
FG XR6 Turbo GT3576R CHRA Suit Garrett FPV G6E XR6T Ford Barra upgrade
$795
100% Aussie seller, Aussie built here in Australia!
Personal testing & customer feedback
(Fast spool, aggressive boost, some described as savage)
Very good spool time from lower RPM range & very aggressive mid range to higher rpm performance)
This is my personal favourite and is suitable for standard or modified barras.
Brand New Aus Turbo Performance CHRA suit Garrett Turbo GT3576R. (Ball bearing turbo)
Please note the imagewith a complete turbo is so you can see how these GT3576R look fitted & the additional items are not included in the sale.
This is a straight bolt on upgraded stage 3 CHRA that requires no modifications to your original compressor housing & turbine housing.
No you won't log check engine lights or mess up your standard tune providing you run standard boost, standard boost actuator.
This is the best bang for your buck, we have tested these and they make big difference in performance when compared to the standard Garrett CHRA.
What you will notice, faster spool, nicer sound on boost, faster & harder boost guaranteed, amazing increase in performance!
The bearing housing is a brand new upgraded aftermarket type, it's stronger then the original & the oil feed holes are slightly larger for better oil flow & less chance of oil starvation.
This Turbo CHRA suits Ford Falcon FG XR6 turbo, G6E, Ford Territory.
(This CHRA will not fit vehicles with the larger GT3582r such as BA BF XR6 turbo or F6 typhoon)
This is an upgraded CHRA for the Garrett GT3576R turbo with 11 blade billet compressor wheel & 9 impeller high flow turbine.
You have a choice of brass cages or peak cages.
Ceramic ball bearings are used for more durability & slightly faster spool
(Proven to be better then steel, Garrett run Ceramic in their later model high end GTX Turbos), built to last!
Aus Turbo CHRA parts fitted:
-New high quality Ceramic ball bearing cartridge with
-brass cages (or Peek).
-New rings (Upgraded Stepped back on turbine side)
-New seals
-New heat shield
-New back seal plate
-New 11 blade billet compressor wheel.
-New 9 blade performance high flow turbine wheel
-New Upgraded High flow oil restrictor
-New upgraded core bearing housing
-VSR balanced
This Aus Turbo CHRA Feels nice & firm like a brand new Garrett turbocharger is meant to feel, spins nice & free.
Professionally built, All work carried out by qualified Australian mechanic with well over 20 years experience. 100% Positive feedback.
These AUS Turbo CHRA's are all hand built in Australia & only the highest quality parts have been used.
Please note: I have seen a number of XR6 Turbo failures due to heat as the factory garrett turbos run plastic bearing cages and steel balls, most I have seen are melted or broken on the hot side, the brass bearing cages alone are an upgrade and the ceramic balls take a lot more heat.
In some other cases failures are due to lack of lubrication, lack of oil changes which causes sludge build up.
Factory oil feed line must be replaced, it's recommended to fit a braided type with a filtration device.
There is a little filter/strainer on the oil pressure switch side of feed line that needs to be removed or replaced also.
I reserve the right to end listing at anytime without notice as I have it advertised elsewhere including Ebay & Facebook.
Any questions I'll be more then happy to answer. Thanks for looking
6 Months limited warranty from date of sale.
Terms and conditions of warranty.
Vehicle must be serviced every 5000km to 10,000km
or 6 months. proof of service will need to be provided.
A good quality full synthetic oil must be used such as Penrite 5w-40.
Warranty does not cover abuse, oil starvation or
sludge build up in engine!
You must check that there is adequate oil supply
& a new braided oil line with a filteration device must
be fitted, no exceptions!
Replacement part warranty only.
Visit our website at
https://351automotivesolutions.com/collections/turbocharger-parts
Personal testing & customer feedback
(Fast spool, aggressive boost, some described as savage)
Very good spool time from lower RPM range & very aggressive mid range to higher rpm performance)
This is my personal favourite and is suitable for standard or modified barras.
Brand New Aus Turbo Performance CHRA suit Garrett Turbo GT3576R. (Ball bearing turbo)
Please note the imagewith a complete turbo is so you can see how these GT3576R look fitted & the additional items are not included in the sale.
This is a straight bolt on upgraded stage 3 CHRA that requires no modifications to your original compressor housing & turbine housing.
No you won't log check engine lights or mess up your standard tune providing you run standard boost, standard boost actuator.
This is the best bang for your buck, we have tested these and they make big difference in performance when compared to the standard Garrett CHRA.
What you will notice, faster spool, nicer sound on boost, faster & harder boost guaranteed, amazing increase in performance!
The bearing housing is a brand new upgraded aftermarket type, it's stronger then the original & the oil feed holes are slightly larger for better oil flow & less chance of oil starvation.
This Turbo CHRA suits Ford Falcon FG XR6 turbo, G6E, Ford Territory.
(This CHRA will not fit vehicles with the larger GT3582r such as BA BF XR6 turbo or F6 typhoon)
This is an upgraded CHRA for the Garrett GT3576R turbo with 11 blade billet compressor wheel & 9 impeller high flow turbine.
You have a choice of brass cages or peak cages.
Ceramic ball bearings are used for more durability & slightly faster spool
(Proven to be better then steel, Garrett run Ceramic in their later model high end GTX Turbos), built to last!
Aus Turbo CHRA parts fitted:
-New high quality Ceramic ball bearing cartridge with
-brass cages (or Peek).
-New rings (Upgraded Stepped back on turbine side)
-New seals
-New heat shield
-New back seal plate
-New 11 blade billet compressor wheel.
-New 9 blade performance high flow turbine wheel
-New Upgraded High flow oil restrictor
-New upgraded core bearing housing
-VSR balanced
This Aus Turbo CHRA Feels nice & firm like a brand new Garrett turbocharger is meant to feel, spins nice & free.
Professionally built, All work carried out by qualified Australian mechanic with well over 20 years experience. 100% Positive feedback.
These AUS Turbo CHRA's are all hand built in Australia & only the highest quality parts have been used.
Please note: I have seen a number of XR6 Turbo failures due to heat as the factory garrett turbos run plastic bearing cages and steel balls, most I have seen are melted or broken on the hot side, the brass bearing cages alone are an upgrade and the ceramic balls take a lot more heat.
In some other cases failures are due to lack of lubrication, lack of oil changes which causes sludge build up.
Factory oil feed line must be replaced, it's recommended to fit a braided type with a filtration device.
There is a little filter/strainer on the oil pressure switch side of feed line that needs to be removed or replaced also.
I reserve the right to end listing at anytime without notice as I have it advertised elsewhere including Ebay & Facebook.
Any questions I'll be more then happy to answer. Thanks for looking
6 Months limited warranty from date of sale.
Terms and conditions of warranty.
Vehicle must be serviced every 5000km to 10,000km
or 6 months. proof of service will need to be provided.
A good quality full synthetic oil must be used such as Penrite 5w-40.
Warranty does not cover abuse, oil starvation or
sludge build up in engine!
You must check that there is adequate oil supply
& a new braided oil line with a filteration device must
be fitted, no exceptions!
Replacement part warranty only.
Visit our website at
https://351automotivesolutions.com/collections/turbocharger-parts
- Date Listed:05/02/2023
- Last Edited:05/02/2023
- Condition:New
- Warranty:Yes
Similar Ads
- Crow Cams Valve Springs 1808-24 Ford Falcon BA BF FG FGX XR6 TurboWhen tuning your XR6 Turbo or Barra lets face it they are putting these in a lot of other vehicles these days, upgrading you valve springs is a must. Here at 4TUNE PERFORMANCE we sell all crow cams products. If we do not have it on our site just call or email us for a quote. Crow Cams 1808-24 FORD FALCON BA BF FG & FPV XR6 Turbo Valve Springs Crow Cams entry level valve sring upgrade is capable of up to 24 PSI of boost Valve Spring Specifications Installed Height – 1.480″ Installed Pre$375Smithfield, NSW•62w
- Custom Garrett GT35R GT3540 Internal Gate 14PSI Spring ActuatorCustom Fabricated Bracket Made For Garrett GT35R GT3540 GT3582R Turbo To Support Larger Internal Gate 14PSI Bolted Spring Actuator Selling Both Together As Set Internal Gate Spring Actuator Reads Tue Following: 432340-0015. 10-266. AE85K As Well As Caution Information This Set Up Came Off A Subaru Impreza Wrx W/ A GT3540 Combo Will Suite Ford Falcon XR6T FPV F6 Typhoon Works Well W/ Most Garrett Turbos Check Specs Do Your Own Research As Well All As Pictured In Great Condition All Mounting P$250Lugarno, NSW•32w
- GTX3540R XR6 Skyline RB Garrett vband Turbo w/pipes & fittingsGTX3583R Garrett Turbo T3 base flange suitable 450-850hp & 2-4Litre Roller bearing CHRA so spools up quick. Water core fittings Alluminium intake pipe Pod air cleaner 3.5" downpipe 0.82 rear housing. Perfect condition, balanced, and rebuilt by Turbologic and barely a few hundred KMs of street use whilst running a new engine. changed to a wild drag setup so no need to hang on to this. fit ford falcons, Nissan skylines , Toyota supras. starts building boost up at around 2000rpm and over 30psi$1,569NegotiableGlen Alpine, NSW•18w
- 4TUNE PERFORMANCE FORD FALCON XR6 BA-BF GTX3584RS TURBOUpgrade or simply replace your old XR6 3582 factory turbo with one our GTX3584RS With very little bolt on mods and a tune. >NEW AERODYNAMICS FEATURE INCREASED HORSEPOWER RANGE >DUAL CERAMIC BALL BEARING SYSTEM >67x84MM BILLET COMPRESSOR WHEEK >68x62MM RS GEN2 TURBINE WHEEL >LARGE 0.72A/R COMPRESSOR COVER 4″ INLET >5 BOLT FACTORY 1.06 TURBINE HOUSING >PORTED LARGE FLAPPER FOR BETTER BOOST CONTROL >EXTERNAL GATE OPITON AVAILABLE ON REQUEST >COMES WITH GASKE$850Smithfield, NSW•62w
- FORD FALCON XR6 TURBO FG FGX 45MM EXTERNAL WASTEGATE SETUPNew from 4 Tune Performance Falcon Xr6 Barra FG FGX 45mm external waste gate setups. Kit comes with a rear housing suit either Factory XR6 Turbo, all 3582 style turbo's, all 3584's and Pulsar Gen3. Setup for a 45mm external wastegate, 45mm external gate and stainless steel screamer pipe, which sits nicely hidden for stealth look, while creating the amazing sound when the gate opens, even better boost control, quicker spool times, better exhaust flow and reduce back pressure. Even the factory$450Smithfield, NSW•48w
- Ford falcon fg mk1 g6e turbo full turbo conversionSelling complete ford falcon fg mk1 g6e turbo barra. Complete motor with ecu, turbo zf, and all turbo engine bay looms. Can include full stock exhaust to suit for fg conversion. Make you xr6 a full turbo car with this package. Or resto mod an older car. Located Minto NSW can freight at buyers expense$12,500Minto, NSW•23w
- TAILSHAFT CENTRE BEARING FORD FALCON BA BF V8 5.4L XR8 FPV FairmoWelcome to Oz Car Parts online shop for all your parts needs Item Description; *BRAND NEW AFTERMARKET DIRECT REPLACEMENT TAILSHAFT CENTRE BEARING / DRIVESHAFT BEARING X1 *SUIT ALL Size: Inside Diameter :35 mm Bolt Hole Centre - Centre: 214 mm NOTE: There are 4 types centre bearing for these models.you should measure your original size before purchasing! Suit: Suits Ford BA BF Series 1 RWD V8 6cyl models including 6cyl Barra 240 245 Turbo models some other$49Smithfield, NSW•293w
- FORD FALCON XR6 BA-BF BARRA NA T FUEL UPGRADE KIT 1000ccThis upgrade kit is perfect for you BA - BF NA T conversion or upgrade. Good for 400-500kw with supporting mods Comes with following 6x 1000c Bosh genuine bosch cores Injectors OEM: ******8040 1x 450LPH Fuel Pump kit OEM: F90000267 1x BA-BF-FG 4 Bar fuel pressure reg OEM: ******0575 1x Map Sensor Many more upgrade parts available, message or email us for more details. https://4tuneperformance.com.au/product/ford-falcon-xr6-ba-bf-barra-na-t-fuel-upgrade-kit-1000cc/ 4 Tune Performanc$595Smithfield, NSW•56w
- FORD FALCON XR6 BA BF FG FGX BARRA 4.0L TITANIUM INLET&EXHAUST STUDS4 Tune Performance Parts Titanum stud kit SET OF 12 M10x1.5×45 Titanium Grade 5 SET OF 4 M10x1.5×45 Titanium Grade 5 SET OF 12 M8x1.25×45 Titanium Grade 5 SET OF 5 M8x1.25×45 Titanium Grade 5 This kit covers Exhaust manifold, inlet manifold, exhaust manifold to turbo and turbo to dump pipe, complete stud. Titanium studs, nuts and washers 45% lighter then standard bolts 12 point nuts makes for mush greater clamping force Will not come lose like the standard bolts Much easier to fit y$275Smithfield, NSW•49w
- Timing Chain Kit For Ford Falcon BA BF FG 4.0L Barra XR6 Territory SXEngine Fit For Ford 4.0 Barra E-Gas & Ecolpi 6 Cyl DOHC 24V LPG Fit For Ford 4.0 Barra 240T 245T 6 Cyl DOHC 24V MPFI Turbo Fit For Ford 4.0 Barra 270T 6 Cyl DOHC 24V MPFI Turbo ULP Fit For Ford 4.0 Barra BA BF FG 6 Cyl DOHC 24V EFI ULP Fitment Fits Ford Fairlane BA******2005 incl.: Ghia 6cyl Barra 182 4.0L 3984cc Fits Ford Fairlane BF******2007 incl.: Ghia 6cyl Barra 190 4.0L 3984cc Fits Ford Fairmont BA******2005 incl.: Ghia 6cyl Barra 182 4.0L 3984cc Fits Ford$199Smithfield, NSW•26w
- Repro Bathurst Wheels 15x7 17x7.5 17x9 or 19x8 XR XT XW XY GT XA XB XCRepro Bathurst Wheels 15x7 17x7.5 17x9 or 19x8 XR XT XW XY GT XA XB XC cobra XD ESP XE XF in stock now!!!! We also have wheel tyre & red Wall packages available at 351automotivesolutions.com 19x8 complete with center caps & wheel nuts In stock! https://351automotivesolutions.com/products/19x8-bathurst-globe-wheel-set-of-4-xr-xt-xw-xy-falcon-gt-ho-phase-3-xa-gt-rpo83-gs-xb-gt https://www.ebay.com.au/itm/256079320788?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=VQLfAxNuQp-&sssrc=2349624&s$1,575St Clair, NSW•6w
- 16x8 Momo Star wheel set VB VC VH VK VL Brock Commodore SL SS16x8 Momo Star wheel set VB VC VH VK VL Brock Commodore SL SS This listing is for a set of 4 wheels not including tyres. free local pick up from St clair NSW or can send Australia & New Zealand wide Available only at 351 Automotive Solutions!$1,595St Clair, NSW•8w
- BA BF FG XR6T GT3582R GT3576R Turbine housing Gasket stud and nut kitGT3582R GT3576R Turbine housing Gasket stud and nut kit Contents: 1x Dump pipe gasket 1x Turbo to manifold gasket 5x Turbine housing studs & nuts 2x Turbine housing brackets 6x Bolts for turbine housing brackets Free express delivery Australia wide Send us a message or visit our website at 351automotivesolutions dot com$80St Clair, NSW•9w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 3102