38 views
3/8 Aluminium Double Diaphragm Air Pneumatic Pump 32 LPM Teflon PTFE
$554.89
3/8" Aluminum Double Diaphragm Air Pneumatic Pump 32 LPM
3/8" Aluminum Double Diaphragm Air Pneumatic Pump 32 LPM
Specifications:
Inlet/Outlet: 3/8"
Max Flow Rate: 32L/min (8.46 Gallon/min)
Max Working Pressure: 8.3 Bar (120 psi)
Max Diameter Solid: 1.5mm
Features:
There are no sliding or rotating parts, our air pumps have very good efficiency even with when pumping high adhesive liquids with low flow rate.
The pressure or the outlet of air pump can be regulated when the machine is running, there is no need to buy any high cost speed changeable motor or drive device.
No damage to our air pumps if running with no input for a long time
The input pressure will never exceed the output pressure. No need to buy any pressure release device or by-pass.
The outlet of our air pumps can be shut down at any time if necessary. Pump will stop immediately and won't cause any power waste, heat production or any abrasion damage. If you want to start the pump again, just open the outlet of the pump and it will start automatically.
The efficiency of our pump will never be reduced by any abrasion.
In normal conditions, our air pumps are suitable for explosion environments without the need for any explosion proof motor or controller. Our Air Pumps are explosion proof.
Our air pumps are small and light, so very mobile.
Advantages Over other Types of Pumps:
Very Simple to Control
Efficiency is constant even when pressure or flow rate is changed
Allows idle running & suction head to 6m (21 inch)
Various pumping speeds/pressures possible
No mechanical seal
Explosion Proof
Water resistant
Portable
No rotating parts (or internal bearings)
Idle running doesn't cause any damage to pump parts
Pressure balance (no oil pressured valve)
Efficiency stays the same even if part abrasions occur
3/8" Aluminum Double Diaphragm Air Pneumatic Pump 32 LPM
Specifications:
Inlet/Outlet: 3/8"
Max Flow Rate: 32L/min (8.46 Gallon/min)
Max Working Pressure: 8.3 Bar (120 psi)
Max Diameter Solid: 1.5mm
Features:
There are no sliding or rotating parts, our air pumps have very good efficiency even with when pumping high adhesive liquids with low flow rate.
The pressure or the outlet of air pump can be regulated when the machine is running, there is no need to buy any high cost speed changeable motor or drive device.
No damage to our air pumps if running with no input for a long time
The input pressure will never exceed the output pressure. No need to buy any pressure release device or by-pass.
The outlet of our air pumps can be shut down at any time if necessary. Pump will stop immediately and won't cause any power waste, heat production or any abrasion damage. If you want to start the pump again, just open the outlet of the pump and it will start automatically.
The efficiency of our pump will never be reduced by any abrasion.
In normal conditions, our air pumps are suitable for explosion environments without the need for any explosion proof motor or controller. Our Air Pumps are explosion proof.
Our air pumps are small and light, so very mobile.
Advantages Over other Types of Pumps:
Very Simple to Control
Efficiency is constant even when pressure or flow rate is changed
Allows idle running & suction head to 6m (21 inch)
Various pumping speeds/pressures possible
No mechanical seal
Explosion Proof
Water resistant
Portable
No rotating parts (or internal bearings)
Idle running doesn't cause any damage to pump parts
Pressure balance (no oil pressured valve)
Efficiency stays the same even if part abrasions occur
- Date Listed:30/09/2021
- Last Edited:30/09/2021
- Condition:New
Similar Ads
- Pneumatic cylinders, 9 x 20mm bore, 25/26mm stroke.In this lot are 4 x Bimba EM-20-26-U ( available separately for $75 ea) and 3 x EM-20-26-U-T1 (available separately for $80 ea) Double-acting single-end rod pneumatic air cylinder with Aluminium end caps built-in magnet ( sw. track position 1 for the -T1 variety) - Bimba (ISO6432 - E-series) - 20mm bore (B20mm) - 25mm stroke (S25mm) - Universal mount - M8 x 1.25 (male) threaded rod - 2 x G1/8" threaded pneumatic ports - Stainless steel rod / Stainless steel 304 body / Nitrile seals/rod wiper -$450Como, NSW•53w
- GAS PROPANE FORGE Furnace Burner Knife Making Blacksmith FarrierGAS PROPANE FORGE Furnace Burner Knife Making Blacksmith Farrier Features & Details Striking Power Output: Our propane knife forge is built to provide an approximate maximum heating temperature of 2462℉/ 1350℃, enough for forging most metals. The 76.8 kW·h / 262k BTU burner can boost heating efficiency. The thick high purity aluminium silicate fiber insulation blanket and forge lid will help maintain temperature for a long time. Large Capacity: Our propane forge boasts a spacious workspace$199Sydney City, NSW•80w
- Portable Battery Air Pump Fishing Aerator Speed Water Resistant LivePortable Battery Air Pump Fishing Aerator Speed Water Resistant Live Bait Features: Quite motor suitable for night fishing. Adjustable stainless steel clip for live bait bucket. Include unbreakable air-stone & flexible air-hose. Longlife type motor for battery power. Diaphragm type motor smooth airing system. Tough hi-impact resistant case. Specifications: Model: AP302 Color: White Material: ABS Battery Type: 1 * D size battery(not included) Dimension: 146 * 79 * 43mm Package si$44.90Sydney City, NSW•106w
- Tamiya 1/10 The Frog 2WD Off Road Buggy Re Release 2005 RC Kit 58354Tamiya 1/10 The Frog 2WD Off Road Buggy Re Release 2005 RC Kit 58354 Includes Free postage Product Description Manufacturer - Tamiya Scale - 1/10 Motor Type - Brushed Surface Type - Off Road Drive - 2 Wheel Drive Vehicle Type - Buggy Available for postage on 10/4/23 Tamiya corp logo.svg Return of the Frog First introduced in 1983, the 2WD racing buggy Frog made a huge splash with its eye-catching design and high-performance running. The Frog now makes a comeback, updated for a new age, but$250Mortdale, NSW•51w
- Liberty Professional Dual Head StethoscopeAvailable in Black, Navy Blue and Teal Lightweight aluminium chest piece with wide frequency response Double inner spring binaural Diaphragm diameter 45mm Bell diameter 20mm Non-chill ring and diaphragm ring provides excellent patient comfort One-piece moulded PVC tubing Latex free Pickup Caringbah (Sutherland Shire Sydney)$20Caringbah, NSW•2d
- HOT AIR GUN SOLDERING Digital REWORK STATION for YIHUA8508D BGA SMDHOT AIR GUN SOLDERING Digital REWORK STATION for YIHUA8508D BGA SMD IC LCD *Pipe air flow indicator ,simple and reliable . *Diaphragm pump, more suitable for BGA, SMD, temp sensitive component. *automatic mode and manual mode,much more convenient * Automatic cool-down function.To avoid the heater damage, the cooling begins automatically when the power to the heater is shut off. The air stops blowing after cool-down(air temp lower than 100°C). * High quality heating element, rapid warming$129Sydney City, NSW•184w
- Coleman’s Quickbed Double Air Mattress & Rechargeable Electric PumpColeman quickbed plus airbed - $60 new as per Anaconda: https://www.anacondastores.com/camping-hiking/sleeping/airbeds/coleman-quickbed-plus-airbed/****6355?gclsrc=aw.ds&gclsrc=aw.ds&gad_source=1&gclid=Cj0KCQiA4NWrBhD-ARIsAFCKwWv3ErnLOW0xXANfKtI3i9ccncZPPGh6RuvBl2gJ8S09-iBjjopSI0kaAj1QEALw_wcB Coleman Rechargeable Quickpump 120v/240v - $89.99 at Anaconda https://www.anacondastores.com/camping-hiking/sleeping/pumps/coleman-rechargeable-quickpump-120v240v-red/BP90029958-red Items only used$50Randwick, NSW•20w
- TAMIYA 1/10 THUNDER SHOT 2022 Off Road Racer 4WD RC Buggy Kit 58706TAMIYA 1/10 THUNDER SHOT 2022 Off Road Racer 4WD RC Buggy Kit 58706 Includes Free Postage Following the Fire Dragon, Scorcher and Thunder Dragon, Tamiya welcomes Thunder Shot as a re-released and updated version. This R/C model features some inherited basic specifications from Item 58361 with different CVA oil dampers and the addition of an aluminium motor mount, for better motor performance, and structural rigidity. This R/C model assembly kit is a re-released and updated version of Thunder$400Mortdale, NSW•24w
- Electric Air compressorChicago Pneumatic Air Compressor Silent 1.5HP 180L/min 6L Specifications: Maximum Pressure: 8 bar Motor Size: 1.5hp Ideal Usage: Professional, On Site Pump Displacement: 180 l/min(6.36CFM) Tank Sizes: 6L Type: Piston Weight: 12kg Dimensions: 36x30x48cm LxWxH Pick up only$150NegotiableTurramurra, NSW•25w
- Gravity Sand Blaster Gun Portable Small Sandblasting Tool HandheldGravity Sand Blaster Gun Portable Small Sandblasting Tool Handheld Spray Machine Portable Gravity Sandblasting Tool Pneumatic Small Sand Blasting Machine 90psi Portable Gravity Pneumatic Set Home DIY Mini Blasting Device Sandblaster Antirust Adjustable Sandblasting Hand Held Sandblaster Gun Gravity Feeder Large-capacity material pots use various types of sand black steel jade, silicon carbide, glass beads, etc. Sandblasting Gun Gravity Feed Sandblast Gun Sandblast Gun Suitable for I$69Sydney City, NSW•117w
- NICE BiDi Wi-Fi Interface Smart Home Application BUS-T4 WIFI Plug InNICE BiDi Wi-Fi Interface The Nice BiDi-Wi-Fi interface module is a pocket programming interface that ensures simple and complete configuration of Nice Gate and Door automation through the MyNice Pro app, making installation procedures easy and efficient. The Nice BiDi Wi-Fi Interface provides you the opportunity to perform all your home automation programming phases even while sitting comfortably in your vehicle. Features A pocket-sized tool to facilitate Nice automation configuration pro$85.77Prestons, NSW•14w
- NICE BiDi Dimmer Interface Smart Home ApplicationNICE BiDi Dimmer Interface The NICE BiDi Dimmer interface has a new Intelligent Light Control Experience in the new era of light management. Seamlessly integrate your lighting into your smart home system without the need for a gateway, offering unparalleled convenience and control through both unidirectional transmitters and wired buttons. Tailored Dimming Experience With BiDi-Dimmer, you're in complete control. Effortlessly manage your lighting's brightness using two wired buttons. The set$151.47Prestons, NSW•14w
- NICE BiDi Smart Switch Smart Home ApplicationNICE BiDi Smart Switch Interface The NICE BiDi Smart Switch is a miniaturised unidirectional and bidirectional interface to manage lights and electrical loads. The BiDi-Switch lets you integrate lights and electrical loads into your smart home system. All the lights in a room can be managed with one device and there’s no need to buy smart bulbs or replace the existing switch. Thanks to its small size, BiDi-Switch can be installed in most flush-mounted boxes. The NICE BiDi switch also provide$103.97Prestons, NSW•14w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 4300