149 views
400 WATT RMS DIGITAL BI-AMP RCF ART AUDIO SPEAKERS + STANDS + CABLES
$1,100
400 WATT RMS DIGITAL BI-AMP RCF ART AUDIO SPEAKERS + HEAVY DUTY SPEAKER STANDS + 2 X 6M BALANCED MICROPHONE CABLES XLR PATCH LEAD MALE TO FEMALE EXTENSION FOR MIC OR DESK + 2 X APPROX 1.7/1.8M POWER CORD LEAD CABLE 3 PIN AU PLUG TO IEC-C13
400 WATTS RMS DIGITAL BI-AMP RCF ART AUDIO SPEAKERS-HIGH END PA SYSTEM.
FEATURES:
15" High power woofer, 2.5" voice coil.
1" Mylar dome, high frequency driver.
Wide dispersion 90 x 60 constant directivity horn.
800 Watts Peak, 400 Watts RMS digital bi-amplification.
128 dB max spl.
DSP processing, boost eq, soft limiter and protection.
XLR or jack input, XLR signal output.
An ear for quality in high end audio will certainly appreciate the effortless punch, power and clarity of these ART 415-A PA speakers made by RCF.
Thanks to the high powered 15" woofers of neodymium and the molded strong and durable high tech enclosure these PA speakers are physically lighter to handle than others of similar size.
They are ideal for a two speaker left right system for studios, on stage, in large halls, big meeting venues or just about anywhere where sound needs to be heard clear and audible.
The ART 415-A is an optimum choice for live situations where full range, outstanding bass reproduction and extra vocal punch are required.
The high frequencies are precise and natural thanks to the compression driver with a 1” mylar dome in front of a low compression, optimised geometry, radial phase plug while a powerful bass punch is guaranteed by a 15" neodymium woofer.
Note: RCF have been building high quality audio gear for eighty years, concentrating on superior performance types of transducers......that is, innovative electronics and design of speaker units and microphones for pro or amateur use.
RCF are well known and respected leaders in the audio industry.
Later model updates for the ART 400 series are in price ranges of $3,000 to over $5,000 for a pair of these high end speakers.
PLUS TWO (2) HEAVY DUTY SPEAKER STANDS:
The stands are not as bad as they look in the sub standard photos.
They have been stored in a dusty corner and need a good polish up.
They have four pre-set lockable heights that stand between 90cm and 180cm, locked down with attached pins, and rubber-capped feet to ensure a firm grip on any surface.
Not least, the stand is rotatable and scalable and of course, foldable for easy transport.
FEATURES:
Strong iron construction
Powder-coated finish
Adjustable height
Locking pins
Universal 35mm diameter bar
Four pre-set lockable heights
Rubber-capped feet
Scalable and rotatable
SPECIFICATIONS:
Height adjustable: 90cm to 180cm
Weight: 1.97kg each
Tripod material: Iron
Middle tube diameter: 37mm
Leg tube diameter: 35mm
Top tube diameter: 35mm
Colour: Black
Max load weight: 60kg
PLUS 2 X 6M BALANCED MICROPHONE CABLES XLR PATCH LEAD MALE TO FEMALE EXTENSION FOR MIC OR DESK.
DESCRIPTION:
These quality Mic leads are great for a range of pro audio solutions.
Most commonly used to plug microphones into audio mixers such as a PA.
Great for live music performances or studio recordings.
Another common application for these leads is using them to plug an amp directly into a mixer using a DI (direct input) box.
- High Quality XLR Male to Female Plug Balance 3pin Microphone MIC Audio Cable.
- Extremely Durable Flexible PVC Outer Jacket
- Low-Z (Low Impedance) And Balanced - Shields your signal from interference, and transfers your audio over longer distances
- OFC Copper Conductor Oxygen-Free Copper - Provides better clarity of sound
- Can be used for power amplifier, mixer, microphone, microphone, stage sound and other equipment.
- Perfect for all Studio, Live & Audio Applications
PLUS 2 X APPROX 1.7/1.8M POWER CORD LEAD CABLE 3 PIN AU PLUG TO IEC-C13.
Power leads for each speaker unit.
I am open to any reasonable offers.
Will deliver to Launceston and the north east area.
400 WATTS RMS DIGITAL BI-AMP RCF ART AUDIO SPEAKERS-HIGH END PA SYSTEM.
FEATURES:
15" High power woofer, 2.5" voice coil.
1" Mylar dome, high frequency driver.
Wide dispersion 90 x 60 constant directivity horn.
800 Watts Peak, 400 Watts RMS digital bi-amplification.
128 dB max spl.
DSP processing, boost eq, soft limiter and protection.
XLR or jack input, XLR signal output.
An ear for quality in high end audio will certainly appreciate the effortless punch, power and clarity of these ART 415-A PA speakers made by RCF.
Thanks to the high powered 15" woofers of neodymium and the molded strong and durable high tech enclosure these PA speakers are physically lighter to handle than others of similar size.
They are ideal for a two speaker left right system for studios, on stage, in large halls, big meeting venues or just about anywhere where sound needs to be heard clear and audible.
The ART 415-A is an optimum choice for live situations where full range, outstanding bass reproduction and extra vocal punch are required.
The high frequencies are precise and natural thanks to the compression driver with a 1” mylar dome in front of a low compression, optimised geometry, radial phase plug while a powerful bass punch is guaranteed by a 15" neodymium woofer.
Note: RCF have been building high quality audio gear for eighty years, concentrating on superior performance types of transducers......that is, innovative electronics and design of speaker units and microphones for pro or amateur use.
RCF are well known and respected leaders in the audio industry.
Later model updates for the ART 400 series are in price ranges of $3,000 to over $5,000 for a pair of these high end speakers.
PLUS TWO (2) HEAVY DUTY SPEAKER STANDS:
The stands are not as bad as they look in the sub standard photos.
They have been stored in a dusty corner and need a good polish up.
They have four pre-set lockable heights that stand between 90cm and 180cm, locked down with attached pins, and rubber-capped feet to ensure a firm grip on any surface.
Not least, the stand is rotatable and scalable and of course, foldable for easy transport.
FEATURES:
Strong iron construction
Powder-coated finish
Adjustable height
Locking pins
Universal 35mm diameter bar
Four pre-set lockable heights
Rubber-capped feet
Scalable and rotatable
SPECIFICATIONS:
Height adjustable: 90cm to 180cm
Weight: 1.97kg each
Tripod material: Iron
Middle tube diameter: 37mm
Leg tube diameter: 35mm
Top tube diameter: 35mm
Colour: Black
Max load weight: 60kg
PLUS 2 X 6M BALANCED MICROPHONE CABLES XLR PATCH LEAD MALE TO FEMALE EXTENSION FOR MIC OR DESK.
DESCRIPTION:
These quality Mic leads are great for a range of pro audio solutions.
Most commonly used to plug microphones into audio mixers such as a PA.
Great for live music performances or studio recordings.
Another common application for these leads is using them to plug an amp directly into a mixer using a DI (direct input) box.
- High Quality XLR Male to Female Plug Balance 3pin Microphone MIC Audio Cable.
- Extremely Durable Flexible PVC Outer Jacket
- Low-Z (Low Impedance) And Balanced - Shields your signal from interference, and transfers your audio over longer distances
- OFC Copper Conductor Oxygen-Free Copper - Provides better clarity of sound
- Can be used for power amplifier, mixer, microphone, microphone, stage sound and other equipment.
- Perfect for all Studio, Live & Audio Applications
PLUS 2 X APPROX 1.7/1.8M POWER CORD LEAD CABLE 3 PIN AU PLUG TO IEC-C13.
Power leads for each speaker unit.
I am open to any reasonable offers.
Will deliver to Launceston and the north east area.
- Date Listed:17/04/2024
- Last Edited:17/04/2024
- Condition:Used
- Shipping:Pickup Only
Similar Ads
- DEFINITIVE TECHNOLOGY SPEAKERSSPEAKERS HAVE INBUILT SUBWOOFER 8 INCH DRIVER BASE 300 WATTS AMP BUILT IN SPEAKERS OUT PUT 150 WATTS IN GOOD CONDITION .$600Legana, TAS•67w
- Cygnett CentreStage Black Speaker Stand Suit Early iPhones iPodsCygnett CentreStage Black Speaker Stand Suits Early iPhones & iPods with an input jack Turn that old iPhone 3/4/5 into a punchy little music delight Make your sounds the centre of attention with CentreStage. Using the provided 3.5mm audio jack input, amplify your music with stereo sound. Compatible with iPhone, smartphones and MP3 players, the stand securely cradles your device while delivering rich, quality audio. COMPATIBILITY iPhone 3 and 3G iPhone 4/4S/5 iPod Touch All iPod Classic an$20Prospect Vale, TAS•121w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 2441