189 views
Adjustable Side Steps Brush Bars Suits Ford Ranger / Mazda BT50 / Ev
$749
Adjustable Side Steps Brush Bars Suits Ford Ranger / Everest / Mazda BT50
Dual Cab / Single Cab
The accessories at OZI4x4 Accessories are designed and manufactured to ensure a perfect fit and optimal performance, every single time.
Our latest Heavy-duty side steps and Brush bars
They have been designed to fit on any Dual Cab UTES they bolt on to the chassis just like every other slider on the market. The Steps have arms which move to bolt anywhere on to the chassis where you would like to position the arms, they bolt on to the side steps instead of the old design of being fixed. They allow 4x4 Enthusiasts to choose the place that suits them to locate the arms with same design of nut and bolt which go above and below the chassis with a plate of steel on the other side of the chassis. which lock the sidestep on to the chassis the brush bars are exactly the same as other rock sliders on the market they do come longer the reason being this is that you can install on any Bullbar on the market as every Bullbar is unique and the loops are sometime closer to the vehicle or some time further out away from the vehicle the Brush bars always need cutting to the desired position to lock with the Bullbar.
Included
Pair of Heavy-Duty Side Steps
Brush Bars fittings
T6/T7 Fitting Kit
Nuts & Bolts
Fitment
Make: Model: Year: Series:
Ford Ranger******2014 PX1
Ford Ranger******2018 PX2
Ford Ranger******2022 (Pre Face) PX3
Ford Everest *****2022 Everest
Mazda BT50******2019 BT50
Description
Adjustable Mounts for chassis
Black Powder Coated Finish
Brackets Bolt to chassis
Brackets made Heavy Duty steel
Brush bars come extra long to suit any Bullbar
Brush bars need to be cut to fit on the Bullbar
Brush Bar Clamps is suitable to 53mm Bullbars
Brush bars come extra long to suit any Dual cab vehicle on the market
Professional Installation Is recommended
Manufactured using heavy duty steel
Drilling required for brush bars to bullbar
Brush bars will need to be cut down to suit Bullbar
Powder Coated Black
Check Plate Steps
May Touch Flares when installing brush bars
Pickup available
SKU: L-SSTEP-BRB-UTE-UNI UNI-BRUSH-BAR A-SSTEP-BRB-PX123-BRACKET
How to Pay Us:
Please choose a payment method and supply your correct address and contact details and we will arrange delivery and provide you with your tracking number etc.
We accept all payments made via PayPal, Zip Pay, After Pay, Humm, Credit Cards, Bank Transfers & Direct Deposits.
Disclaimer:
OZI4X4 AUSTRALIA STRONGLY ADVICE THAT A PROFESSIONAL SHOULD INSTALL ANY OF THE ACCESSORIES THAT IS PURCHASE FROM US, WE ARE NOT LIABLE FOR ANY DAMAGE THAT MAY OCCUR DURING INSTALLATION AND FREIGHT OF THE ITEM. WE OFFER PROFESSIONAL INSTALLATION TO MOST OF THE ACCESSORIES SOLD BY US AT OUR SHOP. FOR BOOKING AND QUOTATIONS OF INSTALLATION FEES PLEASE CONTACT US.
Australia’s Biggest Bullbar Wholesaler Located in Sydney.
Dual Cab / Single Cab
The accessories at OZI4x4 Accessories are designed and manufactured to ensure a perfect fit and optimal performance, every single time.
Our latest Heavy-duty side steps and Brush bars
They have been designed to fit on any Dual Cab UTES they bolt on to the chassis just like every other slider on the market. The Steps have arms which move to bolt anywhere on to the chassis where you would like to position the arms, they bolt on to the side steps instead of the old design of being fixed. They allow 4x4 Enthusiasts to choose the place that suits them to locate the arms with same design of nut and bolt which go above and below the chassis with a plate of steel on the other side of the chassis. which lock the sidestep on to the chassis the brush bars are exactly the same as other rock sliders on the market they do come longer the reason being this is that you can install on any Bullbar on the market as every Bullbar is unique and the loops are sometime closer to the vehicle or some time further out away from the vehicle the Brush bars always need cutting to the desired position to lock with the Bullbar.
Included
Pair of Heavy-Duty Side Steps
Brush Bars fittings
T6/T7 Fitting Kit
Nuts & Bolts
Fitment
Make: Model: Year: Series:
Ford Ranger******2014 PX1
Ford Ranger******2018 PX2
Ford Ranger******2022 (Pre Face) PX3
Ford Everest *****2022 Everest
Mazda BT50******2019 BT50
Description
Adjustable Mounts for chassis
Black Powder Coated Finish
Brackets Bolt to chassis
Brackets made Heavy Duty steel
Brush bars come extra long to suit any Bullbar
Brush bars need to be cut to fit on the Bullbar
Brush Bar Clamps is suitable to 53mm Bullbars
Brush bars come extra long to suit any Dual cab vehicle on the market
Professional Installation Is recommended
Manufactured using heavy duty steel
Drilling required for brush bars to bullbar
Brush bars will need to be cut down to suit Bullbar
Powder Coated Black
Check Plate Steps
May Touch Flares when installing brush bars
Pickup available
SKU: L-SSTEP-BRB-UTE-UNI UNI-BRUSH-BAR A-SSTEP-BRB-PX123-BRACKET
How to Pay Us:
Please choose a payment method and supply your correct address and contact details and we will arrange delivery and provide you with your tracking number etc.
We accept all payments made via PayPal, Zip Pay, After Pay, Humm, Credit Cards, Bank Transfers & Direct Deposits.
Disclaimer:
OZI4X4 AUSTRALIA STRONGLY ADVICE THAT A PROFESSIONAL SHOULD INSTALL ANY OF THE ACCESSORIES THAT IS PURCHASE FROM US, WE ARE NOT LIABLE FOR ANY DAMAGE THAT MAY OCCUR DURING INSTALLATION AND FREIGHT OF THE ITEM. WE OFFER PROFESSIONAL INSTALLATION TO MOST OF THE ACCESSORIES SOLD BY US AT OUR SHOP. FOR BOOKING AND QUOTATIONS OF INSTALLATION FEES PLEASE CONTACT US.
Australia’s Biggest Bullbar Wholesaler Located in Sydney.
- Date Listed:25/05/2023
- Last Edited:25/05/2023
- Condition:New
- Warranty:Yes
Similar Ads
- OIL CATCH CAN SUITE RANGER PATROL PRADO HILUX MAZDA NAVARA 4WDWelcome to Oz Car Parts online shop for all your parts needs ## Fitting Service Available In Our Mechanical Workshop Fully Licensed ## *After market replacement part authorized for use in repairs only* Item Description; Suit: For crankcase ventilation ( Will fit any vehicle up to 250 kW) Specifically designed to accommodate the latest generation of turbo-charged engines Allows flexible installation locations on the engine or in the engine compartment Specification: -Ne$59Smithfield, NSW•217w
- MAZDA BT50 NUDGE BAR BRAND NEW MAZDA NUDGE BAR BT-50Save on pick up! Licensed fitting available Item Description Our accessories are designed and manufactured to ensure a perfect fit and optimal performance, every single time. Brand new 304 grade stainless steel 3” nudge bar Includes mounting brackets, bolts, nuts and installation manual Easy installation with a perfect fit no drilling required Stainless steel chrome nudge bar Including integrated LED Light bar mounting holes Chrome Nudge Bar to Suits a$259Parramatta, NSW•167w
- EXTENDED REAR SHACKLES 2'' LIFT TO SUITE FORD RANGER MAZDA BT-50Welcome to Oz Car Parts online shop for all your parts needs ## Fitting Service Available In Our Mechanical Workshop Fully Licensed ## Item Description; Suit:FOR FORD RANGER PX PXII XT XLT 2012-ON MAZDA BT-50******2015 Feature: - Rear Extended Lift Up Greasable Shackles - These shackles which will give you approximately 2" inch ( 45-48 mm ) of extra lift due to the fact that you are raising just one end of the spring - With shackles it will have a much smooth ride on or of$95Smithfield, NSW•217w
- UNIVERSAL ADJUSTABLE TUB LADDER RACK ROOF RACK TO SUIT TUB BODYOZ CANOPIES PTY LTD FITTING AND DELIVERY AVAILABLE BRAND NEW UNIVERSAL LADDER RACK TO SUIT ALL TUBS INCLUDING FORD, TOYOTA, LDV, MERCEDES, HOLDEN, MITSUBISHI, ISUZU, MAZDA AND NISSAN AMAROK MADE FROM SUPER HEAVY DUTY BLACK STEEL RATED TO OVER 200KGS. 3 INCH PIPE. INTEGRATED TIE DOWN POINTS. HEIGHT ADJUSTABLE AND WIDTH ADJUSTABLE. UNLIKE MOST OTHER UNIVERSAL RACKS, LEVEL YOUR LOAD! CAN ACCOUNT FOR LOADS UP TO 1510MM WIDE. ADJUSTMENT BETWEEN 490MM TO 625MM FROM THE SIDE OF THE TU$179Parramatta Area, NSW•279w
- Tailgate Central Lock MAZDA BT50 MAZDA Tail gate central lockingOZ CANOPIES PTY LTD FITTING AND DELIVERY AVAILABLE Uses your existing factory key fob integrating with the existing central locking functions of your vehicle Tail gate central locking system includes harness actuator and brackets Suits all MAZDA BT50 Models only - that have the key lock within the handle. ALSO Suitable for the following FORD vehicles Ford Ranger Mk1******2012******2014 Ford Ranger MK2******2016******2018 Ford Ranger MK3 2019 - onward Ford$84NegotiableParramatta, NSW•165w
- MAZDA BT50 BT-50 2011 SIDE STEPS RUNNING BOARDS HEAVY DUTYOZ CANOPIES PTY LTD FITTING and DELIVERY AVAILABLE Please don’t hesitate to visit our showroom to see the quality of our parts! We are so sure of the fit and finish that we are more than happy to test fit this item for you! Our accessories are designed and manufactured to ensure a perfect fit and optimal performance, every single time. Introducing the Oz Canopies robust heavy duty body mounted side step, an elegant and heavy duty alternative to the traditional alloy step boards$299Parramatta, NSW•163w
- MAZDA BT 50 BLACK SUPER HEAVY DUTY SIDE STEPS 2011 to CurrentOz Canopies & 4X4 Riverstone NSW, Ph: *******8666 FITTING and DELIVERY AVAILABLE, Please don’t hesitate to visit our showroom to see the quality of our parts! We are so sure of the fit and finish that we are more than happy to test fit this item for you, Our accessories are designed and manufactured to ensure a perfect fit and optimal performance, every single time, Introducing the Oz Canopies robust heavy duty body mounted side step, an elegant and heavy duty alternative to the t$349NegotiableParramatta, NSW•163w
- SIDE STEPS MADA BT50 SIDE STEPS NEW MAZDA SIDE STEPSFITTING AND DELIVERY AVAILABLE BRAND NEW MAZDA BT50 SIDE STEPS SUITS ALL MAZDA BT50 2011 TO CURRENT MODELS LIFE TIME WARRANTY Brand New Heavy duty Side Steps to suit MAZDA BT50 BT-50 2011 DUAL CAB models Sold as a pair with the driver and passenger side steps Side Steps offer vehicle protection from stones, mud or whatever else the wheels throw up, protecting your vehicle from damage as the step covers the whole length of the vehicle sill. Complete fitting kit with ea$298NegotiableParramatta, NSW•163w
- Ford PX Ranger Wildtrak ALUMINIUM PlatformFITTING AND DELIVERY AVAILABLE HEAVY DUTY ROOF BASKET BRAND NEW ROOF Platform to Suits all FORD RANGER PX WILDTRAK MODELS Platform Size: 1200mm x 1200mm Longer sizes are available, for other sizes please contact us PLATFORM ALSO AVAILABLE FOR; TOYOTA HILUX, VOLKSWAGEN AMAROK, FORD RANGER, HOLDEN COLORADO, ISUZU DMAX, LDV T60, Mercedes X CLASS, MITSUBISHI TRITON, MAZDA BT50, NISSAN NAVARA, Zip Pay Now Available! Oz Canopies PTY LTD www.ozcanopies.com.au fNegotiableParramatta, NSW•231w
- TAILGATE SLOW DOWN SHOCK STRUT for FORD RANGER PX PX2 XL XLT WILDTRAKFitting Service Available In Our Mechanical Workshop Fully Licensed ## Item Description; *After market replacement part authorized for use in repairs only* *BRAND NEW DIRECT REPLACEMENT *FOR Suit: Fits Ford Ranger PX MK1 & MK2******2018 Fits Mazda BT-50******2018 Features: 100% Brand New Tailgate slow down strut kit. The parts anti-rust and anti-breaking, with double insurance. Easy to install. Simple bolt on kit and no drilling required$35Smithfield, NSW•178w
- Pallat Racking for sale Smithfield and Gregory Hills and MinchinburyPallat Racking for sale Smithfield and Gregory Hills and Minchinbury $1 -Secondhand For more product details, please message me..$1Smithfield, NSW•2d
- Pallat Rack for sale Uprights from $50 and beams from $20Pallat Rack for sale Uprights from $50 and beams from $20 -Secondhand For more product details, please message me..$1Smithfield, NSW•2d
- Amarok Tub 2010+ with rear bar and tail lightsAmarok Tub 2010+ with rear bar and tail lights -Secondhand For more product details, please message me..$100Smithfield, NSW•2d
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 4494