38 views
Electric Steam Steriliser BBBTTLSTERA
$30
Please see summary of manual below..
https://assets.kogan.com/files/usermanuals/BBBTTLSTERA-QSG.pdf
Usage Instructions
Sterilise
1. Before placing the bottles and accessories (teats, caps etc.)
into the steriliser, they must all be washed and thorough rinsed
in fresh water, then emptied.
2. Remove the Bottle Container from the Base unit, then place the
bottles inside UPSIDE DOWN. This is important so that the
steam can enter the bottles easily.
3. Place the accessories into the Accessory Grid, then cover with
the lid. Fill the Measuring Cup to the top of the marked line with
90ml of fresh water, then pour into the Base Heating Element.
• DO NOT EXCEED OR REDUCE THE VOLUME OF WATER.
• DO NOT PUT THE ACCESSORY GRID IN UPSIDE DOWN.
DO NOT TAKE THE GRID OUT OF THE CONTAINER.
4. Assemble the unit parts, then place on the Base Heating
Element.
. Plug the unit in to the power socket. It will automatically be on and in standby mode,
with the LCD screen displaying “00”.
6. Press “Function” ONCE. The indicator light for “Sterilise” will flash for 5 seconds, then the
unit will automatically sterilise the contents.
7. The whole process of sterilisation lasts for 15 minutes, with the LCD screen performing
the countdown. Once completed, the unit will remain in standby mode with the light off
and the LCD screen displaying “00”.
• DO NOT OPEN THE LID OR TOUCH THE SURFACE IMMEDATELY AFTER FINISHING
STERILISATION.
8. If the sterilised bottles and accessories (teats, caps etc.) are not used within 24 hours,
please re-sterilise them again.
9. Please re-fill with 90ml of fresh water if you will be using the unit again. Do not reuse
water.
Cycle Sterilise
1. Before placing the bottles and accessories (teats, caps etc.) into the steriliser, they must
all be washed and thorough rinsed in fresh water, then emptied.
2. Remove the Bottle Container from the Base unit, then place the bottles inside UPSIDE
DOWN. This is important so that the steam can enter the bottles easily.
3. Place the accessories into the Accessory Grid and cover with the lid. Fill the measuring
cup to the top of the marked line with 270ml of fresh water, then pour into the Base
Heating Element.
• DO NOT EXCEED OR REDUCE THE VOLUME OF WATER
• DO NOT PUT THE ACCESSORY GRID UPSIDE DOWN. DO NOT TAKE THE GRID OUT
OF THE CONTAINER.
4. Assemble the unit parts and place on the Base Heating Element.
5. Plug the unit in to the power socket. It will automatically be on and in standby mode,
with the LCD screen displaying “00”.
6. Press “Function” TWICE. The indicator light for “Cycle” will flash for 5 seconds and the
LCD screen will display “6h”, which means that the default sterilisation time is set for 6
hours. Press the “Time” button ONCE and the screen will display “12h”, which means the
time has now been set for 12 hours. The unit will then automatically sterilise circularly.
The indicator light for “Cycle” will remain lit.
7. The unit will automatically run the sterilisation process every 6
changed. While the cooking time is under 15 minutes, pressing “Time” will add 1 minute to
the cooking time. When the cooking time is higher than 15 minutes, pressing “Tim” will
add 5 minutes to the cooking time. The maximum cooking time you can set is 60
minutes.
6. During the whole process of cooking, the indicator light will remain lit and the time left
will be displayed on the LCD screen. Once cooking has completed, the indicator light will
go out, the unit will be in standby mode and the LCD screen will display “00”.
Maintenance
• Please clean the heating element regularly.
• Unplug the unit from the mains supply before cleaning.
• The base unit must not be immersed in water.
• Do not use abrasive chemicals on any part of the warmer.
• Do not use proprietary kettle de-scalers to clean the heating element.
Cleaning the base heating element
• Lime-scale build up may affect the function and performance of the steriliser. The heating
element should be wiped clean of any deposits l
https://assets.kogan.com/files/usermanuals/BBBTTLSTERA-QSG.pdf
Usage Instructions
Sterilise
1. Before placing the bottles and accessories (teats, caps etc.)
into the steriliser, they must all be washed and thorough rinsed
in fresh water, then emptied.
2. Remove the Bottle Container from the Base unit, then place the
bottles inside UPSIDE DOWN. This is important so that the
steam can enter the bottles easily.
3. Place the accessories into the Accessory Grid, then cover with
the lid. Fill the Measuring Cup to the top of the marked line with
90ml of fresh water, then pour into the Base Heating Element.
• DO NOT EXCEED OR REDUCE THE VOLUME OF WATER.
• DO NOT PUT THE ACCESSORY GRID IN UPSIDE DOWN.
DO NOT TAKE THE GRID OUT OF THE CONTAINER.
4. Assemble the unit parts, then place on the Base Heating
Element.
. Plug the unit in to the power socket. It will automatically be on and in standby mode,
with the LCD screen displaying “00”.
6. Press “Function” ONCE. The indicator light for “Sterilise” will flash for 5 seconds, then the
unit will automatically sterilise the contents.
7. The whole process of sterilisation lasts for 15 minutes, with the LCD screen performing
the countdown. Once completed, the unit will remain in standby mode with the light off
and the LCD screen displaying “00”.
• DO NOT OPEN THE LID OR TOUCH THE SURFACE IMMEDATELY AFTER FINISHING
STERILISATION.
8. If the sterilised bottles and accessories (teats, caps etc.) are not used within 24 hours,
please re-sterilise them again.
9. Please re-fill with 90ml of fresh water if you will be using the unit again. Do not reuse
water.
Cycle Sterilise
1. Before placing the bottles and accessories (teats, caps etc.) into the steriliser, they must
all be washed and thorough rinsed in fresh water, then emptied.
2. Remove the Bottle Container from the Base unit, then place the bottles inside UPSIDE
DOWN. This is important so that the steam can enter the bottles easily.
3. Place the accessories into the Accessory Grid and cover with the lid. Fill the measuring
cup to the top of the marked line with 270ml of fresh water, then pour into the Base
Heating Element.
• DO NOT EXCEED OR REDUCE THE VOLUME OF WATER
• DO NOT PUT THE ACCESSORY GRID UPSIDE DOWN. DO NOT TAKE THE GRID OUT
OF THE CONTAINER.
4. Assemble the unit parts and place on the Base Heating Element.
5. Plug the unit in to the power socket. It will automatically be on and in standby mode,
with the LCD screen displaying “00”.
6. Press “Function” TWICE. The indicator light for “Cycle” will flash for 5 seconds and the
LCD screen will display “6h”, which means that the default sterilisation time is set for 6
hours. Press the “Time” button ONCE and the screen will display “12h”, which means the
time has now been set for 12 hours. The unit will then automatically sterilise circularly.
The indicator light for “Cycle” will remain lit.
7. The unit will automatically run the sterilisation process every 6
changed. While the cooking time is under 15 minutes, pressing “Time” will add 1 minute to
the cooking time. When the cooking time is higher than 15 minutes, pressing “Tim” will
add 5 minutes to the cooking time. The maximum cooking time you can set is 60
minutes.
6. During the whole process of cooking, the indicator light will remain lit and the time left
will be displayed on the LCD screen. Once cooking has completed, the indicator light will
go out, the unit will be in standby mode and the LCD screen will display “00”.
Maintenance
• Please clean the heating element regularly.
• Unplug the unit from the mains supply before cleaning.
• The base unit must not be immersed in water.
• Do not use abrasive chemicals on any part of the warmer.
• Do not use proprietary kettle de-scalers to clean the heating element.
Cleaning the base heating element
• Lime-scale build up may affect the function and performance of the steriliser. The heating
element should be wiped clean of any deposits l
- Date Listed:17/08/2022
- Last Edited:17/08/2022
- Condition:Used
- Shipping:Pickup Only
Similar Ads
- Baby items: Minbie baby bundle.Selling brand new baby items not needed, as baby is breastfed. We bought everything from online late December. Portable milk warmer 2x Mini UV steriliser - not sold online anymore 2x 210ml premium PPSU bottles 2x 270ml premium PPSU bottles Dummy 2pack with carrier 0 months XS (2pack) teats 6 months (2pack) teats 6 months fast pace (2pack) teats Pick up and cash only.$180NegotiableRedbank Plains, QLD•14w
- Medela Solo Single Electric Breast PumpOnly bought in February 2024, used for 2 weeks only- paid $299. compact, effective and easy to use single electric breast pump with rechargeable built in battery, 2-phase Expression® technology and PersonalFit Flex ™ breast shield. It has only a few parts making is easy to clean and assemble. With its intuitive 4-button interface and 9 pre-programmed settings this single electric breast pump is easy to use. With the USB type C connector on the Solo ™ single electric breast pump, the built-in$200NegotiableAugustine Heights, QLD•1w
- Nuk nature sense electric breast pumpI used this approx 3 times but my son just wouldn't take to a bottle so I stopped pumping. It's a fantastic machine easy to use and gentle, Pick up bundamba cash only. Electric pump with rechargeable battery, soft silicone cushion and ergonomicshield - for easy pumping of milk 16 individual programmes for suction rhythm and suction power, as well as memory function for favourite programme and LCD smart display Operation with battery, network adapter or external power bank, powerful pump unit o$150Bundamba, QLD•13w
- Electric Breast Pump - Avent- Only used for two weeks as I stopped breast feeding - Everything is included in the box apart from the 2 disposable breast pads - See pictures on box for details$80Bellbird Park, QLD•66w
- Medela breast pumpUsed but great condition breast pump and accessories- bottles,teets some used some new can see in pics An innovative pump that fits in the palm of your hand, the Medela Freestyle breast pump is a double electric pump with the high level of performance you can expect from Medela. It includes thoughtful features and provides true mobility, freedom and flexibility. Located Raceview$120Raceview, QLD•2w
- Medela breast pumpSelling my medela freesryle flex double electric breast pump. Baught in 2020. Used couple times and hasnt been used since. RRP. $427 I am selling for $280 negotiable. Pick up in bundamba 4304.$280Bundamba, QLD•1w
- Bubka Hands Free beast pumpBubka hands free pump and accessories x 2 Bought in July to try to assist feeding journey. Used for 2 months before being placed in storage Pick up Raceview 4305 • Includes two wearable electric breast pumps • Cordless: no cords, tubes or dangling bottles • Lightweight in your nursing bra, just 220g • Long Battery Life: up to 100 minutes per device, depending on intensity • Full touch LCD display • 4 Modes: Massage, Expression, Automatic, Lactation • Powerful hospital-grade suction (*max 300$220Raceview, QLD•21w
- Kids Swing Chair Canopy 2 Seater Garden
- 3-4 Years
Features:With Swing, Indoor DURABLE AND SAFE: Made with sturdy metal pipes and secure seat belts. COMFORTABLE AND ADJUSTABLE: Adjustable seats and canopy. PERFECT FOR TWO: Double seat design is perfect for siblings or friends to swing together and enjoy the outdoors SPECIFICATIONS: measures L110xW74xH113cm and can hold up to 50kg. It's recommended for children ages 3 and up Perfect fit for any garden, porch, or backyard, this swing chair for kids with an attractive, colourful design. Not only$30NegotiableSpringfield, QLD•29w - Brosnan golf clubs setBrosnan golf clubs set$20NegotiableSpringfield, QLD•85w
- Infasecure bed guard, rail for baby or toddlerBed guard for baby or toddler Includes manual, carry bag and all accessories as per photo$20Springfield, QLD•85w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here