517 views
Denon Integrated Amplifier Model: PMA-890DG
$1,700
Year released: 1989
Type Pre-main amplifier with digital multi-interface
Rated Output (20 Hz ~ 20 kHz) 130W 130W (6 Ω)
110W 110W (8 Ω)
Input Sensitivity / Impedance CD Input : 150mV/30k Ω
Total harmonic distortion factor 0.004% (20 Hz to 20 kHz, 55W, 8 Ω)
Dynamic Power 350W (2 Ω)
275W (4 Ω)
170W (8 Ω)
TIM Distortion Measurement limit value or less
Output bandwidth 5 Hz to 100 kHz (55W output, 0.5%, 8 Ω)
Line input frequency characteristic 4 hz ~ 150 khz, 0 -3dB (Output 1W, 8 Ω)
Output impedance 0.1 Ω or less
Output terminal Speaker : AORb : 6 ~ 16 Ω, A B : 12 ~ 16 Ω
Headphone Jack Maximum Output : 430 mW (8 Ω), 8 ~ 400 Ω Compatible
Digital input / output level / impedance 0.5Vp-p/75 Ω Coaxial
Standard optical input : 2 systems
Frequency response (0 dB) 5 Hz to 20 kHz ± 0.3 dB
Signal-to-noise ratio (vs. 0 db, 1 khz) 105dB
Dynamic Range (1 kHz) 100dB
Total harmonic distortion factor (0 dB, 1 kHz) 0.0025%
Preamplifier Section
Input Sensitivity / Impedance Phono MM : 2.5mV/47k Ω
Phono MC : 0.2mV/100 Ω
CD, AUX, Tuner, Tape1, 2 pb : 150mV/30k Ω
Maximum Output / Rated Output 8V/150mV
Total harmonic distortion factor 0.002% (MM, 1 khz, 8 v)
Equalizer (RIAA) deviation 20 Hz to 50 kHz ± 0.3 dB (MCIN)
SN ratio (input ratio (input short-circuit, auditory sense compensation A) Phono MM:82dB
Phono MC : 62 dB (at 0.25 mV input)
Line:108dB
Tone control characteristics Bass : ± 8 dB (100 Hz)
Treble : ± 8 dB (10 kHz)
Subsonic filter 16 Hz, -12dB/oct.
Loudness control characteristic 100Hz: 6dB
10kHz: 6dB
Muting switch -20dB
Power consumption (Electrical Appliance and Material Control Law) 216W
Pwer 100 VAC, 50Hz/60Hz
External dimensions
(including foot, knob, terminal, etc.) PMA-890D : Width 434x Height 180x Depth 420 mm
PMA-890DG : Width 470x Height 181x Depth 420 mm
Weight PMA-890D:18kg
PMA-890DG:19.4kg
Type Pre-main amplifier with digital multi-interface
Rated Output (20 Hz ~ 20 kHz) 130W 130W (6 Ω)
110W 110W (8 Ω)
Input Sensitivity / Impedance CD Input : 150mV/30k Ω
Total harmonic distortion factor 0.004% (20 Hz to 20 kHz, 55W, 8 Ω)
Dynamic Power 350W (2 Ω)
275W (4 Ω)
170W (8 Ω)
TIM Distortion Measurement limit value or less
Output bandwidth 5 Hz to 100 kHz (55W output, 0.5%, 8 Ω)
Line input frequency characteristic 4 hz ~ 150 khz, 0 -3dB (Output 1W, 8 Ω)
Output impedance 0.1 Ω or less
Output terminal Speaker : AORb : 6 ~ 16 Ω, A B : 12 ~ 16 Ω
Headphone Jack Maximum Output : 430 mW (8 Ω), 8 ~ 400 Ω Compatible
Digital input / output level / impedance 0.5Vp-p/75 Ω Coaxial
Standard optical input : 2 systems
Frequency response (0 dB) 5 Hz to 20 kHz ± 0.3 dB
Signal-to-noise ratio (vs. 0 db, 1 khz) 105dB
Dynamic Range (1 kHz) 100dB
Total harmonic distortion factor (0 dB, 1 kHz) 0.0025%
Preamplifier Section
Input Sensitivity / Impedance Phono MM : 2.5mV/47k Ω
Phono MC : 0.2mV/100 Ω
CD, AUX, Tuner, Tape1, 2 pb : 150mV/30k Ω
Maximum Output / Rated Output 8V/150mV
Total harmonic distortion factor 0.002% (MM, 1 khz, 8 v)
Equalizer (RIAA) deviation 20 Hz to 50 kHz ± 0.3 dB (MCIN)
SN ratio (input ratio (input short-circuit, auditory sense compensation A) Phono MM:82dB
Phono MC : 62 dB (at 0.25 mV input)
Line:108dB
Tone control characteristics Bass : ± 8 dB (100 Hz)
Treble : ± 8 dB (10 kHz)
Subsonic filter 16 Hz, -12dB/oct.
Loudness control characteristic 100Hz: 6dB
10kHz: 6dB
Muting switch -20dB
Power consumption (Electrical Appliance and Material Control Law) 216W
Pwer 100 VAC, 50Hz/60Hz
External dimensions
(including foot, knob, terminal, etc.) PMA-890D : Width 434x Height 180x Depth 420 mm
PMA-890DG : Width 470x Height 181x Depth 420 mm
Weight PMA-890D:18kg
PMA-890DG:19.4kg
- Date Listed:03/01/2024
- Last Edited:03/01/2024
- Condition:Used
- Shipping:Pickup Only
Similar Ads
- Denon Amplifier PMA-750Specifications Power output: 80 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.02% Input sensitivity: 0.125mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 72dB (MC), 88dB (MM), 110dB (line) Output: 150mV (line) Speaker load impedance: 4Ω to 16Ω Dimensions: 434 x 132 x 407mm Weight: 12kg Year: 1984 It is working great and the sound quality is beautiful. If you try it you will buy it. Location Reservoir 3073$800Reservoir, VIC•22w
- Denon AVC-X3700H 9.2 CH 8K AV AmplifierNear new still has over a year warranty remaining New price $2400. This would suit new buyer as barely been used and as new Denon 9.2 channel integrated Network AV amplifier 8K Ultra HD 7 HDMI inputs and 3 out & eARC out 7 Analogue inputs and 2 zones WiFi, HEOS & voice control for streaming content Dolby Atmos, DTS & IMAX 180 watts out per channel Im using Valve amp so this amp is not used Cash and local pickup only$1,100NegotiableSouth Yarra, VIC•2w
- TEAC AS-M30 Amplifier - Priced to sellStereo integrated amplifier, brushed alloy 2 speaker systems, MM Phono (turntable), auxiliary, Tuner, & Tape inputs for your iPod, CD player, computer or TV audio. Treble, bass tone controls, loudness, earphones . Power output: 30 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.1% Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 70dB (MM), 90dB (line) Dimensions: 410 x 145 x 300mm Weight: 7kg Made in Japan Selling AL$280SHIPPING OFFEREDNegotiableSt Kilda, VIC•7w
- Vintage Denon Stereo Receiver Amplifier DRA-335RUsed Vintage Denon DRA-335R AM/FM Stereo Receiver Amplifier Phono input with A and B speakers Original remote included Used but in excellent condition Selling due to upgrade Works fine with no issues Cash preferred on pickup from Hughesdale Victoria$175NegotiableHughesdale, VIC•41w
- Denon Surround sound receiver with speakersGreat working condition. Multi in / multi out receiver/amplifier. DENON AVR3200 Complete with centre speaker, 2x front speakers and subwoofer. Priced to sell fast. Pickup Footscray. Cash only$150Footscray, VIC•1w
- Denon AVR-X510BT Bluetooth 4K HDMI 5.2 av receiver amplifierYES, AVAILABLE Price is FIRM No PAYID Scammer Was $599 when it's new Bluetooth USB, 4K, 5x HDMI in 1 Out, 3D, ARC, 2x Subwoofer output Comes with remote control and power cable. good used condition, some minor scratches. Fully tested, Bluetooth, HDMI, audio, FM radio, all 5 speaker output works. Watts RMS per Channel (8 Ω) 70 Watts Watts RMS per Channel (6 Ω) 140 Watts full details. https://www.digitalcinema.com.au/denon-avr-x510bt-5-2-channel-home-theatre-av-receiver-bluetooth-stream$300SHIPPING OFFEREDMount Waverley, VIC•1d
- Amplifier Cassette PlayerMade in Japan!!! The Denon Amplifier works perfectly and the sound quality is great. Denon Amplifier $800 Teac Cassette Player $250 The Teac Cassette Player is working and there is an issue unfortunately the record mode is not working. Location Reservoir 3073$1,050Reservoir, VIC•22w
- Denon surround sound amplifier AVR 1803 and remoteHigh end surround sound amplifier with huge number of AV connection options.$100NegotiablePort Melbourne, VIC•8w
- SANSUI Model Number A-5 Vintage Integrated AmplifierSANSUI Model Number A-5 Vintage Integrated Amplifier, Phono imput.Good condition. Excellent working order.$145South Yarra, VIC•1w
- Technics SU-V6 Class A Integrated DC Amplifier in Immaculate Condition≠ It is multi voltage model (110-240V). ≠ Very heavy, about 13kg, still CAN be POSTED anywhere in Australia. ≠ This is a Made in Japan audiophile is a well-known DC Integrated Stereo powerhouse, I think no need to explain here, plenty of reviews in web. ≠ NOT repaired, everything is in original form, nothing has been replaced, you can open and have a look inside as well as functionalities. ≠ Excellent overall condition, everything works perfectly, been looked after really well. ≠ Inspection wel$950SHIPPING OFFEREDMelbourne CBD, VIC•3w
- Accuphase PowerAmp Model: P-450Type Stereo power amplifier Rated continuous average output (20 Hz to 20 kHz) Stereo : 400W/ch (2 Ω, music signal only) 300W/ch (4 Ω) 200W/ch (8 Ω) Monaural specification : (bridge connection) 800W (4 Ω, music signal only) 600W (8 Ω) Total harmonic distortion factor Stereo : 0.05% (2 Ω Load) 0.02% (4 Ω ~ 16 Ω Load) Monaural specification : 0.02% (4 Ω ~ 16 Ω Load) IM distortion factor 0.003% Frequency characteristic 20 Hz ~ 20 kHz + 0 -0.2 dB (at rated continuous average output) 0.5 Hz ~ 160 k$4,200St Albans, VIC•4d
- Accuphase Digital Option Card Model: DAC-60Latest model. Brand new in box, never been used.$1,400St Albans, VIC•4w
- Pioneer Speakers Model: CS-955Method 3-Way, 3-Speaker, Bass reflex system, Bookshelf Type Units Used For low band : 36 cm cone type For Middle Area : 6.5 cm Dome Type For High Frequency : Ribbon Type Impedance 8 Ω Playback frequency band 28 Hz to 100,000 Hz Output sound pressure level 91dB/W/m Max Input 100W Crossover frequency 950 Hz, 8000 Hz Recommended crossover when using a multi-amplifier Low to mid range : 800 to 1000 Hz Medium to High : 6000 to 8000 Hz Maximum input and output sound pressure level of each unit (with$3,500St Albans, VIC•14w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here