37 views
BA BF FG XR6 Turbo GT3582R Gt3576R Garrett rebuild kit full GTX3582R
$310
Application : HIGH QUALITY CERAMIC BALL BEARING REBUILD KIT:
GARRETT TURBO REBUILD KIT
Contents of this kit:
-1x Ceramic ball bearing cartridge
-1x Front ring seal
-1x Rear ring seal
-1x Front seal plate
-1x Oil restrictor pin
-1x Heat Shield
-3x oring seals
-1x shaft nut
-3x seal high tensile plate screws
-2x brass cages
High quality Ceramic ball bearing rebuild kit. (available with brass cages or OEM plastic type cages) you will need to let me know at checkout which one you require.
These kits may suit GT28R GT30R GT35R GT3071R
GTX2976R GTX3076R GTX3582R GT3576R GT3582R
I have used these kits personally with great success on BA BF & FG XR6 Turbo.
I have seen a number of XR6 Turbo failures due to heat and oil starvation.
Factory oil feed line must be replaced.
There is a little filter on the oil pressure switch side of feed line that needs to be cleaned or replaced!
Please note these kits should only be fitted by qualified tradesman.
Warranty will be void if not fitted by certified Technician.
These kits are sent from local seller in Australia not china! so I can Guarantee a fast delivery service.
You can also check out our website at 351automotivesolutions dot com
Thanks for looking.
Any questions just ask
These kits suit Ford Falcon XR6 Turbo BA BF FG F6 Typhoon or any other vehicles fitted with these types of turbochargers.
GARRETT TURBO REBUILD KIT
Contents of this kit:
-1x Ceramic ball bearing cartridge
-1x Front ring seal
-1x Rear ring seal
-1x Front seal plate
-1x Oil restrictor pin
-1x Heat Shield
-3x oring seals
-1x shaft nut
-3x seal high tensile plate screws
-2x brass cages
High quality Ceramic ball bearing rebuild kit. (available with brass cages or OEM plastic type cages) you will need to let me know at checkout which one you require.
These kits may suit GT28R GT30R GT35R GT3071R
GTX2976R GTX3076R GTX3582R GT3576R GT3582R
I have used these kits personally with great success on BA BF & FG XR6 Turbo.
I have seen a number of XR6 Turbo failures due to heat and oil starvation.
Factory oil feed line must be replaced.
There is a little filter on the oil pressure switch side of feed line that needs to be cleaned or replaced!
Please note these kits should only be fitted by qualified tradesman.
Warranty will be void if not fitted by certified Technician.
These kits are sent from local seller in Australia not china! so I can Guarantee a fast delivery service.
You can also check out our website at 351automotivesolutions dot com
Thanks for looking.
Any questions just ask
These kits suit Ford Falcon XR6 Turbo BA BF FG F6 Typhoon or any other vehicles fitted with these types of turbochargers.
- Date Listed:10/02/2024
- Last Edited:10/02/2024
- Condition:New
- Warranty:Yes
Similar Ads
- FORD FALCON XR6 TURBO BA BF 45MM EXTERNAL WASTEGATE SETUP4 Tune Performance parts now selling external wastegate setups for your BA BF Xr6 Turbo's Kit comes with a rear housing suit either Factory XR6 Turbo, all 3582 style turbo's, all 3584's and Pulsar Gen3. Setup for a 45mm external wastegate, 45mm external gate and stainless steel screamer pipe, which sits nicely hidden for stealth look, while creating the amazing sound when the gate opens, even better boost control, quicker spool times, better exhaust flow and reduce back pressure. Even the$650Smithfield, NSW•51w
- FORD FALCON XR6 TURBO FG FGX 45MM EXTERNAL WASTEGATE SETUPNew from 4 Tune Performance Falcon Xr6 Barra FG FGX 45mm external waste gate setups. Kit comes with a rear housing suit either Factory XR6 Turbo, all 3582 style turbo's, all 3584's and Pulsar Gen3. Setup for a 45mm external wastegate, 45mm external gate and stainless steel screamer pipe, which sits nicely hidden for stealth look, while creating the amazing sound when the gate opens, even better boost control, quicker spool times, better exhaust flow and reduce back pressure. Even the factory$450Smithfield, NSW•48w
- Ford Falcon BA BF XR6 Barra GT3582 CHRA Turbo CartridgeDrop in replacement CHRA for Ford Falcon BA BF Xr6 Factory Turbo Turbo Cartridge CHRA for GT35 GT3582 .70A/R Compressor Wheel: 61.36mm (56 Trim) Turbine Wheel: 62.32mm (84 Trim) NOTE: All our Turbo's and Turbo parts are backed with a 12 months warranty https://4tuneperformance.com.au/product/ford-falcon-ba-bf-xr6-barra-gt3582-chra-turbo-cartridge/ Open 8am to 5pm Weekdays only Pickup from our Smithfield or Tuggerah Store Or can delivery Australia wide Call 4TUNE PERFORMANCE TODAY$245Smithfield, NSW•30w
- KS Racing 4 Turbo Back FULL EXHAUST System FOR XR6 XR6T FORD BA/BF FGKS Racing 4" Turbo Back FULL EXHAUST System FOR XR6 XR6T FORD BA/BF Falcon BA/BF 4" TURBO BACK EXHAUST SYSTEM 4" system stainless steel fully tig welded with V band type clamps. Wake up your cars potential and give it a great sound at the same time. HIGH PERFORMANCE BOLT ON EXHAUST KIT RETAIL PRICE = 2089.97$1,565Lidcombe, NSW•71w
- Custom Garrett GT35R GT3540 Internal Gate 14PSI Spring ActuatorCustom Fabricated Bracket Made For Garrett GT35R GT3540 GT3582R Turbo To Support Larger Internal Gate 14PSI Bolted Spring Actuator Selling Both Together As Set Internal Gate Spring Actuator Reads Tue Following: 432340-0015. 10-266. AE85K As Well As Caution Information This Set Up Came Off A Subaru Impreza Wrx W/ A GT3540 Combo Will Suite Ford Falcon XR6T FPV F6 Typhoon Works Well W/ Most Garrett Turbos Check Specs Do Your Own Research As Well All As Pictured In Great Condition All Mounting P$250Lugarno, NSW•32w
- FORD FALCON XR6 BA BF FG FGX BARRA 4.0L TITANIUM INLET&EXHAUST STUDS4 Tune Performance Parts Titanum stud kit SET OF 12 M10x1.5×45 Titanium Grade 5 SET OF 4 M10x1.5×45 Titanium Grade 5 SET OF 12 M8x1.25×45 Titanium Grade 5 SET OF 5 M8x1.25×45 Titanium Grade 5 This kit covers Exhaust manifold, inlet manifold, exhaust manifold to turbo and turbo to dump pipe, complete stud. Titanium studs, nuts and washers 45% lighter then standard bolts 12 point nuts makes for mush greater clamping force Will not come lose like the standard bolts Much easier to fit y$275Smithfield, NSW•49w
- Timing Chain Kit For Ford Falcon BA BF FG 4.0L Barra XR6 Territory SXEngine Fit For Ford 4.0 Barra E-Gas & Ecolpi 6 Cyl DOHC 24V LPG Fit For Ford 4.0 Barra 240T 245T 6 Cyl DOHC 24V MPFI Turbo Fit For Ford 4.0 Barra 270T 6 Cyl DOHC 24V MPFI Turbo ULP Fit For Ford 4.0 Barra BA BF FG 6 Cyl DOHC 24V EFI ULP Fitment Fits Ford Fairlane BA******2005 incl.: Ghia 6cyl Barra 182 4.0L 3984cc Fits Ford Fairlane BF******2007 incl.: Ghia 6cyl Barra 190 4.0L 3984cc Fits Ford Fairmont BA******2005 incl.: Ghia 6cyl Barra 182 4.0L 3984cc Fits Ford$199Smithfield, NSW•26w
- ROCKER/VALVE COVER GASKET KIT TO SUITE FORD FLACON BA BF FG 4.0LITRE 6Welcome to Oz Car Parts online shop for all your parts needs ## Fitting Service Available In Our Mechanical Workshop Fully Licensed ## Item Description; *BRAND NEW DIRECT REPLACEMENT ROCKER / VALVE COVER GASKET KIT *TO SUITE FORD FALCON BA BF FG 4.0LITRE 4CYL******2014 XR6 AND TURBO MODELS 2WD AUTO AND MANUAL SAME$79Smithfield, NSW•235w
- FORD FALCON BA BF XR6 TURBO HDI STAGE 3 GT2 440 PRO INTERCOOLER KITHDi has finished its new Stage 3 version ba/bf XR6 Intercooler Kit (GT2 PRO).This is a complete intercooler kit incorporating an all new designed intercooler and big air flow kit,battery relocation kit. The kit also includes the award winning HDi CLAMP for easy installation and best performance! The especially designed GT2TM intercooler is fin design for greater strength and flow. https://4tuneperformance.com.au/product/ford-falcon-ba-bf-xr6-turbo-hdi-stage-3-gt2-440-pro-intercooler-kit/$1,499Smithfield, NSW•43w
- Ford Falcon XR6 BA BF FG Barra 4.0L Titanium Exhaust Manifold stud kitFord Falcon XR6 BA BF FG FGX Barra 4.0L Titanium Exhaust Manifold stud kit FULL SET OF 12 M10x1.5×45 Titanium Grade 5 Titanium studs, nuts and washers 45% lighter then standard bolts 12 point nuts makes for mush greater clamping force Will not come lose like the standard bolts Much easier to fit your standard or aftermarket manfold Titanium also emits anti-corrosion and mechanical properties Replace them once and never worry again Open 8am to 5pm Weekdays only Pickup from our Sm$135Smithfield, NSW•62w
- Repro Bathurst Wheels 15x7 17x7.5 17x9 or 19x8 XR XT XW XY GT XA XB XCRepro Bathurst Wheels 15x7 17x7.5 17x9 or 19x8 XR XT XW XY GT XA XB XC cobra XD ESP XE XF in stock now!!!! We also have wheel tyre & red Wall packages available at 351automotivesolutions.com 19x8 complete with center caps & wheel nuts In stock! https://351automotivesolutions.com/products/19x8-bathurst-globe-wheel-set-of-4-xr-xt-xw-xy-falcon-gt-ho-phase-3-xa-gt-rpo83-gs-xb-gt https://www.ebay.com.au/itm/256079320788?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=VQLfAxNuQp-&sssrc=2349624&s$1,575St Clair, NSW•6w
- 16x8 Momo Star wheel set VB VC VH VK VL Brock Commodore SL SS16x8 Momo Star wheel set VB VC VH VK VL Brock Commodore SL SS This listing is for a set of 4 wheels not including tyres. free local pick up from St clair NSW or can send Australia & New Zealand wide Available only at 351 Automotive Solutions!$1,595St Clair, NSW•9w
- BA BF FG XR6T GT3582R GT3576R Turbine housing Gasket stud and nut kitGT3582R GT3576R Turbine housing Gasket stud and nut kit Contents: 1x Dump pipe gasket 1x Turbo to manifold gasket 5x Turbine housing studs & nuts 2x Turbine housing brackets 6x Bolts for turbine housing brackets Free express delivery Australia wide Send us a message or visit our website at 351automotivesolutions dot com$80St Clair, NSW•10w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 3102