598 views
CANOPY /// EXTRA-CAB HILUX /// TOYOTA HILUX 2005 ///
$900
This Canopy is off an EXTRA CAB 2005 TOYOTA HILUX ute. This canopy is of a very heavy fibre-glass construction, has a bit of weight in it. side windows open for side ute access, and full sheet glass rear door, tinted glass all round. As you can see it sort of fits the 1986 EXTRA CAB UTE, the canopy being a little wide there, and slightly longer. THE diamensions of fibreglass CANOPY: at the base of the canopy, where the canopy goes onto the top of the ute's tub is as follows, width 1620mm wide, and the length is 1900 long, neat, plus there is 50mm extra pretruding at the bottom of the glass-tailgate door of canopy, see pictures of that.
- Date Listed:02/04/2022
- Last Edited:14/10/2022
- Condition:Used
- Warranty:No
- Model:Hilux
- Make:Toyota
- '34'TECUMSEH HG1000 AutomotiveAir-ConditioningRefrigerationCompressorsTECUMSEH Automotive Air-Conditioning (''34'' of them) Compressors--------Tecumseh HG1000 Cast-Iron Type, 10 Cubic Inch, Red Lined at about 4500 RPM. This compressor much the same as FORD MARLIN (Marlin AIR) Type Air-Conditioning Compressor from the 60's and 70's. Some parts from YORK Automotive Air-Conditioning Compressor will fit into a a reconditioning of a Tecumseh HG1000 Compressor, IE. CRANKSHARFT SEAL. The getting of VALUE-PLATES is a bit hard, as the Brickford Manufacturing Plant closed$4,700Swan Hill, VIC•78w
- SIMCA car MOTOR 4 cyl. 1290cc ???? 1940's /// 1950's????this motor was taken out of our old Bond-wood Boat and replaced with a Holden Grey Motor in the mid 1960's. the Grey Motor was taken out of a rusted out old FJ Holden car, Father got at the time. so when the SIMCA Motor was taken out of the Bond-wood Boat, it was in a going condition, nothing wrong with it, no smoke, FINE. the problem was with the SIMCA Motor, just under power thing it was, to gutless to pull a water skier along at a good watering skiing speed. in all this time this SIMCA MOTOR$3,500Swan Hill, VIC•79w
- 252 V6-CHEV MOTOR AND EXTRA'sthis 252 V6-CHEV MOTOR was brought in from the STATES, and has been re-worked. all machining work was done in Golden Square, Bendigo, by RACE MOTORS at the time. so all has been done there, and the motor has been in storage for many years now, never put back together. the 252 V6 Chev Motor is a 225 V6-Chev Motor, BUT fitted with bigger pistons, PUT in IT, and also to add here, a 225 V6-Chev Motor is say a 307 V8-Chev Motor, WITH 2 CYLINDERS CHOPPED OFF IT, to bring it back to 225 cubic inch mot$4,700Swan Hill, VIC•80w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here