207 views
Ford Falcon BA BF 322mm Brake Upgrade kit. caliper/pads/disc
$400 Negotiable
Up for sale front brake setup I pulled off my wrecked FG turbo ute
Factory PBR front calipers and brackets
Factory 322x28mm oem rotor
random generic pads
comes with banjo bolts, bleeder screws and fresh copper crush washers
NO brake lines included, your factory ones will bolt straight up
caliper and caliper brackets have been cleaned-up, shaved and sanded down, prepped and painted with VHT caliper paint in 3 stages with primer then color then gloss clear ontop. I baked the calipers in the oven after each stage and let cure for couple days between each stage.
I rebuilt the calipers with a new seal rebuild kit, the sliding pins and pistons were in great condition no scoring or marking so no need to replace them, I also cleaned up the brake pad retaining clips and all bolts etc.
this setup is a great upgrade for BA's it may even fit on AU since the au's share many parts with BA.
the pads are preety well clapped out not much meat on them you may get 2-4 months of street driving out of em
the rotors have plenty of meat on them they are still 28mm **see pic 5**(they must be replaced @ 26mm)
there's a couple of nicks in the paint at the rear of the caliper and the underside where the pads sit, once they go on the car you'll never see it.
disclaimer: this sale is only for the brake caliper,caliper brackets,pads, discs and bolts. the hub assembly is not included in the sale and it's only there to take pictures for attention.
located @ Terrigal, NSW 2260
can post anywhere australia wide @ buyers expense
Factory PBR front calipers and brackets
Factory 322x28mm oem rotor
random generic pads
comes with banjo bolts, bleeder screws and fresh copper crush washers
NO brake lines included, your factory ones will bolt straight up
caliper and caliper brackets have been cleaned-up, shaved and sanded down, prepped and painted with VHT caliper paint in 3 stages with primer then color then gloss clear ontop. I baked the calipers in the oven after each stage and let cure for couple days between each stage.
I rebuilt the calipers with a new seal rebuild kit, the sliding pins and pistons were in great condition no scoring or marking so no need to replace them, I also cleaned up the brake pad retaining clips and all bolts etc.
this setup is a great upgrade for BA's it may even fit on AU since the au's share many parts with BA.
the pads are preety well clapped out not much meat on them you may get 2-4 months of street driving out of em
the rotors have plenty of meat on them they are still 28mm **see pic 5**(they must be replaced @ 26mm)
there's a couple of nicks in the paint at the rear of the caliper and the underside where the pads sit, once they go on the car you'll never see it.
disclaimer: this sale is only for the brake caliper,caliper brackets,pads, discs and bolts. the hub assembly is not included in the sale and it's only there to take pictures for attention.
located @ Terrigal, NSW 2260
can post anywhere australia wide @ buyers expense
- Date Listed:13/03/2024
- Last Edited:20/04/2024
- Condition:Used
- Warranty:No
- Model:Falcon
- Make:Ford
Similar Ads
- HSV HARROP VT VX 4 SPOT CALIPERS & ROTORS SUIT VL COMMODOREHARROP 'HSV' 4 Piston Brake Kit with Kit to suit VB -VL Commodore This premium HSV Brake Kit has exceptional brake performance! This kit is also the same as used on HSV VT VX & VY Clubsport, Maloo, etc.. Tried, tested and proven brakes. (Must have 17″+ wheels with standard Commodore stud Pattern ). HARROP BRAKE KIT INCLUDES THE FOLLOWING: 2 x Front Calipers: 4 Piston 2 piece aluminium calipers 2 x Rear Calipers: 4 Piston 2 piece aluminium calipers 2 x Front Rotors: 343 mm x 32 mm 1 piece 48 d$7,999Berkeley Vale, NSW•2w
- FG XR6 Falcon Front Struts Springs. Steering Rack, Brakes, Stub Axle2011 FG Ford Falcon XR6 front suspension parts. All sold individually. If u dont specify what parts u want , I will simply delete. Struts with coils $200 pr. Brake calipers $140 pr, steering rack $200, stub axle & bearing $100 ea, K- frame $100 bare, sway bar $50. LOW K CAR with only 50,000 Klms. Pickup from Mardi. No offers.$50Mardi, NSW•3w
- Subaru WRX STI WP Pro 6 pot Calipers & 2 pce Rotors, Braided Lines RacSet of WP Pro 6 piston alloy race calipers with braided lines and fittings, plus matching pair of 2 piece slotted rotors by WP Pro. Box of EBC Red ceramic brake pads just bed in & a set of Ferodo Race pads in same condition. Beautiful workmanship on all parts and the polished alloy looks so much better than powder coating of tothers brands. Purchased for a GC8 but can be fitted to most models up to around 2007 . 5 x100 PCD. There is an adapter plate fitted which may need to be changed for later$2,500Mardi, NSW•3w
- Ford XD PBR brake calipersFord XD PBR brake calipers pick up Tuggerawong Central coast$100Tuggerawong, NSW•8w
- Calibre Disc Brake Pads DB1766CALCalibre Disc Brake Pads DB1766CAL to suit the rear of an SV6 SSV etc commodore, just check it suits your car, I bought it for a VE Commodore SSV rears. Brand new in unopened box.$45Tumbi Umbi, NSW•116w
- Front Disc Brake Pads for Mazda 6 GG GH GJ 2.2 2.3 2.5 MZR FWD 2005OnUp for sale is a set of 4 front Disc Brake Pads for Mazda 6 GG GH GJ 2.2 2.3 2.5 MZR FWD 2005 On ** If you see this ad then yes it's still available Never got round to fitting them before I sold the car. See pictures for further details to check compatibility. *** Located Hamlyn Terrace. Thanks for looking$20Hamlyn Terrace, NSW•5d
- Toyota 4WD Dimpled and Slotted front Discs and pads 05 - 2015 ModelsToyota 4 WD Slotted and Dimpled front discs and Brake Pads. New in Box .... Suits most Toyotas from 05 - 2015 Models 6 stud.$100NegotiableBerkeley Vale, NSW•72w
- UrgentBuilt Barra Atomic Performance 998 - GTA long motorselling my fully sick and fully built barra Atomic Performance 998-GTA spec long motor mods: ACL Competition rod bearings ACL 360degree thrust bearings Atomic FatRods Atomic Stage 4 camshafts Atomic Stage 2 prep crankshaft (mangafluxed and micropolished) Multi-angle valve ported head @ 30. 45. 65 degrees rotating assembly Dynamically balanced engine block bored .5mm over standard engine block torque plated and honed Atomic harmonic balancer - Race series Atomic 12-pt balancer bolt w/ washer At$15,000NegotiableTerrigal, NSW•3d
- HONDA EG EK DC2 Front Suspension Sale HARDRACESelling front suspension setup to suit HONDA EG EK DC2 with HARDRACE bushings. I cleaned up all the arms, painted them in VHT epoxy single stage black paint. The bushings were on my car for < than 1 month, they are in near new condition, still got plenty of life in them. HARDRACE hardend rubber front compliance bush - $75 Front shock forks suit EG/DC2 - $75 Front complete lower arms with HARDRACE hardened rubber bush - $300 or the whole lot for $400 Can post australia wide @ buyer's exp$400NegotiableTerrigal, NSW•2w
- Hardrace RTA hardened rubber bush Honda EG EK DC2selling my Hardrace rear trailing arm hardened rubber bushes to suit Honda civic Integra EG EK DC2 Bushes are brand new not 1 single km on them, they have been installed into my trailing arms and I've removed them going to a poly bush setup. I can install these with my press into your car or trailing arms if you bring them to me for an extra $50. Can post Australia wide @ buyer's expense or pick-up from Terrigal, NSW, 2260$80Terrigal, NSW•3w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here