66 views
Wheels MFG PF30 Outboard Bottom Bracket
$90
SHIPPING OFFERED
Wheels MFG PF30 Outboard Bottom Bracket
Thread together bottom bracket for frames using the PF30 bottom bracket standard. Two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Specifically designed for installing 24.00mm spindle diameter cranks (Shimano, Etc.) in PF30 (46mm ID BB shell) frames without the need for any adapters.
Bottom Bracket Includes:
BB Cups with bearings.
2 - Silicone dust seals.
2 - crank spindle spacers.
Other details.
Bearings: Enduro ABEC-3.
Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB.
Bottom Bracket Shell Width: 61mm* - 73mm.
Bottom Bracket Shell I.D.: 46mm.
Over Bearing Width: 90.5mm in 68mm wide shell.
Crank Spindle Diameter: 24.00mm.
Tool Pattern: 44mm, 16-notch.
Weight: 161g.
Packaged for retail display.
These were installed on a bike project that did less than a 100 kms before they were removed and the bike sold. So they are in as new condition.
These retail for over $170 currently so offered at a significant discount to RRP.
Pick up from Toorak 3142 or I can arrange postage at buyer’s expense.
Thread together bottom bracket for frames using the PF30 bottom bracket standard. Two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Specifically designed for installing 24.00mm spindle diameter cranks (Shimano, Etc.) in PF30 (46mm ID BB shell) frames without the need for any adapters.
Bottom Bracket Includes:
BB Cups with bearings.
2 - Silicone dust seals.
2 - crank spindle spacers.
Other details.
Bearings: Enduro ABEC-3.
Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB.
Bottom Bracket Shell Width: 61mm* - 73mm.
Bottom Bracket Shell I.D.: 46mm.
Over Bearing Width: 90.5mm in 68mm wide shell.
Crank Spindle Diameter: 24.00mm.
Tool Pattern: 44mm, 16-notch.
Weight: 161g.
Packaged for retail display.
These were installed on a bike project that did less than a 100 kms before they were removed and the bike sold. So they are in as new condition.
These retail for over $170 currently so offered at a significant discount to RRP.
Pick up from Toorak 3142 or I can arrange postage at buyer’s expense.
- Date Listed:13/03/2024
- Last Edited:11/04/2024
- Condition:Used
- Shipping:Shipping & Pickup
Similar Ads
- Assorted Bottom Brackets - Shimano, Truvativ, Token, RPM, VP, GXP, NecSelling an assortment of bottom brackets, most are English thread, one Italian, details, condition and prices below: [1] Sold [2] Sold [3] Sold [4] Truvativ LE Square Taper Bottom Bracket - BC 108mm, spins well, threads are good [one very small flat spot], $25; [5] SOLD [6]SOLD [7] Truvativ LE Square Taper Bottom Bracket - BC 108mm, spins well, threads are good, $25; [8] Truvativ Power Spline Bottom Bracket - BC 113mm, very good condition, spins well, 12 spline spindle, $35. [9] Token Tiramic$25St Kilda, VIC•67w
- SPECIALIZED ROCKHOPPER MOUNTAIN BIKE FRAME 13 INCH XS SIZEFor sale is a SPECIALIZED Rockhopper mountain bike 13 inch X/small aluminium frame, for 26 inch wheels. It was built up for my teenage son, but he has outgrown it. It is in very good structural condition, with a few marks and scratches from use. It has standard Shimano bottom bracket and front derailleur fitted. It suits a 1 1/8" head tube. It is sold as is, no refunds or returns. Make me an offer.$80NegotiableMontrose, VIC•4w
- Assorted Cycling Tools - Park Tool, Unior, Bondhus, BBB, Shimano, etc.Selling an assortment of bicycle tools, all are in good to excellent condition: Park Tools: [1] Park Tool Bottom Bracket Tapper for English threads - $450 [6] Park Tool ST-3 Three-Way Socket Wrench - SOLD [7] Park Tool ST-3 Three-Way Socket Wrench - SOLD [8] Park Tool ST-3 Three-Way Socket Wrench - SOLD [20] Park Tool PH-10 10mm Handled Hex Wrench - SOLD [21] Park Tool PH-6 6mm Handled Hex Wrench - SOLD [22] Park Tool PH-4 4mm Handled Hex Wrench - SOLD [23] Park Tool PH-3 3mm Handled Hex Wrenc$1St Kilda, VIC•20w
- Bike Parts - Single Speed Mostly, Thompson, Omnium etc1. ***SOLD*** Tektro Quartz R737 Callipers Brakes front and rear. Long Drop 47-57mm. Used but great condition with pads. $50. 2. Sugino Messenger PCD 130mm 44T chain ring, medium used good condition. $20. 3. Freewheel Shimano SF-MX30 medium used good condition, 16T BMX 1/8 and 3/32. $20. 4. Truvativ Chainring Track 48T 5 Bolt 144 mm Bolt Centre Diameter (Omnium) Aluminium 5 mm - Tungsten Grey - near new. $50. 5. Omnium Polished Track Crank Set GXP Bottom Bracket 175mm 144BCD OM8LCGZ SRAM. Light$1NegotiableNorthcote, VIC•67w
- 2020 Avanti Corsa SL1 Carbon Road Bike Disc Frameset - M/L (56.5cm)For sale is a 2020 Avanti Corsa SL1 carbon disc frameset in Medium/Large (56.5cm) size. I purchased this frameset new as part of a complete bike in February 2021. It has approximately 5,000km on the clock and hasn’t been ridden much in the past 18 months. It’s too large for me, and I have a couple of other bikes I mostly ride. The frameset is in very good condition, with a small chip on the left seat stay and a few chips around the left rear thru axle entry point. It also has some minor surfac$395SHIPPING OFFEREDRingwood East, VIC•32w
- 2-in-1 Bicycle Bottom Bracket Removal Sprocket Spanner WrenchSpecial designed for "Le Tour de France" bike repairing. 2-in-1 cassette install and remove wrench Big head with 16 teeth flat ring for bottom bracket removal; Small head with 12 teeth spline for variable speed freewheel sprocket extracter.$15Hoppers Crossing, VIC•191w
- Park Tool Bottom Bracket Tapping Set - English ThreadsSelling a Park Tool Bottom Bracket Tapper for English threads, it is missing the facing bit (which can be purchased separately if you need it), Park Tools are bullet proof and last a life time, this one retails at $1,099 new, so even without the facing bit it is still a bargain. Pick-up is in St.Kilda 3182 or postage at buyer's expense (should be about $15 to anywhere in Australia).$400St Kilda, VIC•25w
- 170 Track cranks and UN55 Bottom Bracket170 length track cranks. Branded as ‘brown jersey’ but I’ve seen these unbranded as just generic cranks. They’ve held up well and the tapers are in great condition. Last of the UN55 bottom brackets also in good condition. Doesn’t come with bolts as I needed them for my next setup$80Rowville, VIC•15w
- Standard bykes 125R frame barsLate 2000s Standard Bykes 125R race frame (hand made in America) 20"tt length. Includes 19mm euro bottom bracket and Standard Bykes strip race bars 8" rise. Can supply more pics to serious enquiries. Price is pick up 3151, shipping can be arranged$400SHIPPING OFFEREDBurwood East, VIC•32w
- Bicycle cracksetSingle speed / Fixie Crankset, pedals , bottom bracket, chain, whole set, silver colour, excellent condition,$45Murrumbeena, VIC•7w
- Shimano Bottom Bracket SM-BB92-41B Hollowtech II Press-Fit - BNIBShimano Bottom Bracket SM-BB92-41B Hollowtech II Press-Fit - BNIB. Brand New in box. FEATURES Use: Road Model: SM-BB92-41B. BB-Type: Press Fit (41x24mm). Press-Fit BB shell width: 86.5mm. Shell diameter: 41mm. Material: Resin. COMPATIBILITY Dura-Ace FC-9000. Dura-Ace FC-R9100. Pick up from Toorak 3142 or I can arrange postage at buyer’s expense. $40 or $50 including postage (Australia wide)$40SHIPPING OFFEREDToorak, VIC•6w
- TACX T3050 SPIDER TEAM BICYCLE WORKSTANDTACX T3050 SPIDER TEAM BICYCLE WORKSTAND Designed to stay in place during all operations, the Tacx T3050 Spider Team Workstand features tripod legs that offer fantastic support. Suitable for both mountain and race bikes with wheel diameters from 24 to 28 inches, the bike can be quickly and easily secured at the front or rear fork. Height adjustable, the stand is quick to set up, and also comes with a sliding tray to rest your tools and parts on. Features: Suitable for mountain and race bike$90Toorak, VIC•6w
- Colnago C59 150th Edition Carbon bicycle – Dura Ace Di2 and Zipp 303Colnago C59 – Special 150th Edition to commemorate the 150th anniversary of Italian Unification. Lugged Carbon Frame made in Italy. Size 56S (equivalent to a Large frame – effective top tube is 58 cm. For comparison, I am 6 foot and it fits perfectly). Specifications: Frame: Carbon. Fork: Carbon. Brakes: Shimano Dura Ace Dual Pivot Calipers. Cranks: DURA-ACE HOLLOWTECH II Road. Crankset 2x11-speed (53 / 39) 172.5mm. Derailleurs: Shimano Dura Ace Di2 11 speed. Shifters: Shimano Dura$3,650NegotiableToorak, VIC•6w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here