Carry on suit case great condition $20
Similar Ads
- New 1.5-4 ton (35mm pin) AHE Excavator Ripper suit Bobcat, KomatsuThe price includes GST. New Atlas Heavy Engineering (AHE) Excavator Ripper, suit 1.5-4 Ton machine. Designed for Bobcat 331/430, Komatsu PC 20-7/PC 25-1/PC 27R-8/PC 28UU-2/PC 30-7/PC 30R-8/PC 30MRX/PC 30MRX-1/PC 35R-8/PC 35R-8E/PC 38UU-2 etc. but will fit other machines (see below list of machines we have found so far). Great for ripping up tree roots, breaking up rock and loosening rocky ground, tarmac, paved areas etc. This is a strong, well engineered & reinforced Ripper that has come fr$690Pullenvale, QLD•5w
- 20-50 ton (90mm or 100mm pin) Heavy Duty Excavator RipperThe price includes GST. Used, Solid & Deep, Heavy Duty Excavator Ripper, suit 20-50 Ton machine. Great for ripping up tree roots, breaking up rock and loosening rocky ground, tarmac, paved areas etc. It is used but still has plenty of life left. This is a seriously chunky Ripper with a solid Shank thickness of 100mm (see pics# 4 & 8). This Ripper has 100mm Diameter Pins which have been milled down in the middle to 90mm (see pics#9 & 10). They could easily be replaced back to normal 100mm pi$3,650Pullenvale, QLD•6w
- New 9-20 ton Ironfist Excavator Hydraulic Silenced Hammer Rock BreakerPrice includes GST. New Ironfist I-10 Excavator Hydraulic Silenced Hammer Rock Breaker to suit: 9-20 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. The Breaker is New & Unused. Comes with 2x 97mm Point Moils and a Nitrogen refilling Bottle. Required Oil Flow: 80-110 L/min. Required Pressure: 150-170 bar (2175 to 2465 psi). Breaker Dimensions (without moil, as seen in pics): 1740mm(L) x 480mm(W) x 550mm(H), Weight: 942kgs.$9,950Pullenvale, QLD•6d
- New 1-3 ton (30mm Pin) Excavator Hydraulic Hammer Rock BreakerPrice includes GST. New Jea Wen JW450 Excavator Hydraulic Hammer Rock Breaker to suit: 1-3 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with a 43.6mm Point Moil, Hoses, Manual, Toolbox with various Spanners etc. and a Nitrogen Gas Bottle & Pressure Gauge Kit for regassing the breaker. The Hitch Headstock currently has 30mm Pins fitted into collar bosses that fit into 45mm diameter Pin holes, so pins up to 45mm diame$3,650Pullenvale, QLD•4d
- 45mm square Steel Carry Bar for a tradie type uteI bought this ladder bar for the back of my ute years ago when I had a handyman business, but decided to go another way and acquired a small pantec to operate out of, hence didn't need the ladder bar anymore and it is just sitting around, so I decided to sell it. It is made of 45mmx45mm square tube, it was called 50mmx50mm square tube when I bought it but it only measures 45mmx45mm. It is steel and in great condition ( has a tiny bit of hardly seeable surface rust in one small spot). I feel it$50NegotiableRed Hill, QLD•85w
- 20-36 ton (90mm pin) Excavator Headstock Hitch Mounting PlateThe price includes GST. 90mm pin Excavator / Backhoe Headstock to suit 20-36 ton machines. There is some light surface rust and pin wear but is otherwise in good condition. Can be used for a mounting headstock for a Rock Breaker Hammer or Auger, or mount as a regular headstock for buckets and other attachments etc. Headstock setup: 90mm Pin Diameter, 500mm Pin Center to Pin Center (CtoC), 340mm Between the inside Ear Bosses (which can be shaved back up to 364mm between the Ear Plates if you$890Pullenvale, QLD•6w
- 20-36 ton (90mm pin) G-Tex Hydraulic Excavator Quick Hitch CouplingThe price includes GST. Used G-Tex Excavator Hydraulic Coupler Quick Hitch to suit 20-36 Ton machines. Designed for Komatsu PC300/PC340/PC350/PC360 etc. but will fit other machines (see below list of machines we have found so far). Condition is used with a few bangs and scrapes but is otherwise in good condition with plenty of life left. This is a quality built Hitch made in Australia by G-Tex. 90mm Pin Diameter. 513mm Pin Center to Pin Center (CtoC). Between The Ears (BTE): 340mm width whe$4,250Pullenvale, QLD•6w
- Barely used 20-48 ton (90mm pin) 800mm TE Excavator GP Digging BucketThe price includes GST. 90mm pin, 800mm Turners Engineering Excavator GP & Trenching Bucket suit 20-48 ton machine. The Pin Holes could be bored out to take 100mm Pins (see list of machines it should then fit below...). It has tapered sides so mud slides out easy and minimises ground resistance and there are extra wear strips welded underneath for durability (see pic# 10). It has removable bolt-on Side Cutters, and the front cutting edge plate is 50mm thick! Condition is used but it has had$3,250Pullenvale, QLD•6w
- New 50mm/45mm pin Miller Backhoe Mechanical Spring Quick Hitch CouplerThe price includes GST. New Miller Backhoe Excavator Mechanical Quick Hitch Coupler to suit Caterpillar Backhoe 416D, 416E, 420D, 428 C3, 428 C3D, 432 C3, 438 C3 and possibly other 3-9 Ton Excavators. Want a quick hitch but don't have any spare auxiliary hydraulic lines for a hydraulic hitch? This hitch is identical to a hydraulic hitch setup except you lever the pin clasp open and closed with a rod that compresses the spring. There is no need to pull either of the pins out of your buckets e$1,390Pullenvale, QLD•6w
- 1-3 ton (30mm pin) Cat 400mm Excavator Digging & Trenching GP BucketThe price includes GST. Used Caterpillar 400mm Excavator Digging & Trenching GP Bucket suit 1-3 Ton machine. Condition is used and there is some light rust and pitting from water sitting in it. But this is a well engineered, good solid bucket with plenty of life left. It has bolt-on removable Side Cutters, and has Tapered sides so mud slides out easy and minimises ground resistance. There is also extra wear strips welded underneath for durability (see pic# 9). This is a quality bucket made$520Pullenvale, QLD•5w
- 1.5-4 ton (35mm pin) 400mm Excavator & Backhoe GP Trenching BucketThe price includes GST. Used 400mm Excavator & Backhoe GP Digging & Trenching Bucket, suit 1.5-4 ton ton machines. Designed for Case CX 23 / CX 25 / CX 28 / CX 30 / CX 31, Kobelco SK 20 / SK 20SR-3 / SK 24 / SK 25 / SK 25SR / SK 25SR-2 / SK 27 / SK 27SR-2 / SK 27SR-3 / SK 30, New Holland EH 27.B, Takeuchi TB 25 / TB 26 / TB 28FR / TB 125, Yanmar B 22 / VIO20 / VIO20-1 / VIO20-2 / VIO20-3 etc. but will fit other machines (see below list of machines we have found so far). Condition is used and$470Pullenvale, QLD•5w
- 25-46 ton (110/100/80mm pin) Excavator Headstock Hitch Mounting PlateThe price includes GST. 100mm & 110/80mm pin Excavator Headstock to suit 25-46 ton machines. There is some light surface rust and a few bangs around the mount plate but is otherwise in great condition. Can be used for a mounting headstock for a Rock Breaker Hammer or Auger, or mount as a regular headstock for buckets and other attachments etc. Current Headstock setup: One Pin is 100mm Diameter the other is an 80mm pin that has a sleeve (tube) fitted over it to make it 110mm. 555mm Pin Center$1,100Pullenvale, QLD•6w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here