93 views
Kenwood KA-300 stereo amplifer PHONO input KT-400 tuner
$250
SHIPPING OFFERED
## Available, DO NOT ASK ###
### FIXED price, No offer ###
### Wheelers Hill vic 3150 ###
Very nice looking vintage stereo amplifier and tuner.
amplifier with PHONO input for turntable.
cosmetically EXCELLENT USED CONDITIONS with very minor/tiny scratches
►Checked, tested and it's very excellent working condition, no crackle, no pop, no scratching noise., all control and lights work well.
►All the switches and controls has been cleaned and lubricated. All controls work well, quiet and smooth without any abnormal noise.
PLEASE NOTE that the LOUDNESS works however the button is not able to be held in the position after pressed down. Can use a piece of tape to hold in position or replace the button.
PLEASE NOTE: The power button of tuner is hard to be held on the position. Generally if I press slowly then it can be held in the position. If I press hard and release quickly, then NO. The background light of the tuner is not ON. Other lights are working well.
All the input tested and working flawlessly.
►some Features - amplifier
-Phono inputs for turntable
-Loudness
-Headphone output
-One tape input is in the front which is handy
►Specification - amp
https://www.hifiengine.com/manual_library/kenwood/ka-300.shtml
Power output: 25 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 100kHz
Total harmonic distortion: 0.09%
Damping factor: 50
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 78dB (MM), 100dB (line)
Output: 150mV (line)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 400 x 139 x 341mm
Weight: 5kg
specification - Tuner
https://www.hifiengine.com/manual_library/kenwood/kt-400.shtml
Type: Mono/Stereo Tuner
Tuning Bands: FM, MW
Tuning Scale: Analogue
FM Tuning Range: 88 to 108 MHz
Sensitivity: 1.9uV (FM), 15uV (MW)
Signal to Noise Ratio: 68dB (FM), 51dB (MW)
Distortion: 0.3% (FM), 0.5% (MW)
Selectivity: 77dB (FM)
Frequency response: 30Hz to 15kHz (FM)
Output: 800mV (FM), 300mV (MW)
Dimensions: 400 x 138 x 303mm
Weight: 3.5kg
Year: 1980
► Local Pick up or post. Can demonstrate when you pick up. Buy with confidence!!
However used/vintage electronics is SOLD AS IS, NO RETURN and NO WARRANTY
►I try my best to provide detailed description and clear pictures. Please see pictures carefully because they are part of description.
### FIXED price, No offer ###
### Wheelers Hill vic 3150 ###
Very nice looking vintage stereo amplifier and tuner.
amplifier with PHONO input for turntable.
cosmetically EXCELLENT USED CONDITIONS with very minor/tiny scratches
►Checked, tested and it's very excellent working condition, no crackle, no pop, no scratching noise., all control and lights work well.
►All the switches and controls has been cleaned and lubricated. All controls work well, quiet and smooth without any abnormal noise.
PLEASE NOTE that the LOUDNESS works however the button is not able to be held in the position after pressed down. Can use a piece of tape to hold in position or replace the button.
PLEASE NOTE: The power button of tuner is hard to be held on the position. Generally if I press slowly then it can be held in the position. If I press hard and release quickly, then NO. The background light of the tuner is not ON. Other lights are working well.
All the input tested and working flawlessly.
►some Features - amplifier
-Phono inputs for turntable
-Loudness
-Headphone output
-One tape input is in the front which is handy
►Specification - amp
https://www.hifiengine.com/manual_library/kenwood/ka-300.shtml
Power output: 25 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 100kHz
Total harmonic distortion: 0.09%
Damping factor: 50
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 78dB (MM), 100dB (line)
Output: 150mV (line)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 400 x 139 x 341mm
Weight: 5kg
specification - Tuner
https://www.hifiengine.com/manual_library/kenwood/kt-400.shtml
Type: Mono/Stereo Tuner
Tuning Bands: FM, MW
Tuning Scale: Analogue
FM Tuning Range: 88 to 108 MHz
Sensitivity: 1.9uV (FM), 15uV (MW)
Signal to Noise Ratio: 68dB (FM), 51dB (MW)
Distortion: 0.3% (FM), 0.5% (MW)
Selectivity: 77dB (FM)
Frequency response: 30Hz to 15kHz (FM)
Output: 800mV (FM), 300mV (MW)
Dimensions: 400 x 138 x 303mm
Weight: 3.5kg
Year: 1980
► Local Pick up or post. Can demonstrate when you pick up. Buy with confidence!!
However used/vintage electronics is SOLD AS IS, NO RETURN and NO WARRANTY
►I try my best to provide detailed description and clear pictures. Please see pictures carefully because they are part of description.
- Date Listed:12/04/2024
- Last Edited:12/04/2024
- Condition:Used
- Shipping:Shipping & Pickup
Similar Ads
- Kenwood Amplifier KA-501Vintage Kenwood KA-501 integrated stereo amplifier with beautiful illuminated VU meters (1979). The Kenwood KA-501 amplifier delivers 65 watts per channel (8 ohm) and features include a phono input and tone control. Yamaha Speakers are not included. I'm selling Yamaha Speakers for $800 separately. It is working great and provides a great sound quality. You are welcome to test it before you buy it when you meet me. Location Reservoir 3073$550Reservoir, VIC•21w
- Kenwood KA-57 100 Watt Stereo Integrated AmplifierPerfect condition (see photos) Perfect working order. Phono input for turntable. Made in Japan Inspection & Demonstration Welcome Pick up from Mt Waverley. Shipping can be arranged. Specifications: Power output: 50 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 70kHz Total harmonic distortion: 0.09% Damping factor: 40 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 75dB (MM), 100dB (line) Output: 150mV (line) Dimensions: 420 x 110 x 277mm Weight: 6.1k$195SHIPPING OFFEREDMount Waverley, VIC•1w
- TEAC AS-M30 Amplifier - Priced to sellStereo integrated amplifier, brushed alloy 2 speaker systems, MM Phono (turntable), auxiliary, Tuner, & Tape inputs for your iPod, CD player, computer or TV audio. Treble, bass tone controls, loudness, earphones . Power output: 30 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.1% Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 70dB (MM), 90dB (line) Dimensions: 410 x 145 x 300mm Weight: 7kg Made in Japan Selling AL$280SHIPPING OFFEREDNegotiableSt Kilda, VIC•6w
- VINTAGE KENWOOD STEREO AMPLIFIER/1980,s/PHONO/AUXVINTAGE KENWOOD AMPLIFIER ________________________________ PHONO..AUX.CD..TAPE INPUTS BASS..TREBLE..BALANCE CONTROLS BUILT IN FM/AM RECIEVER IN VERY GOOD CONDITION WITH MINOR MARKS CAN POST OR PICK UP IS AVAILABLE Specifications Tuning range: FM, MW, LW Power output: 40 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 70kHz Total harmonic distortion: 0.09% Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 72dB (MM), 95dB (line) Speaker$220SHIPPING OFFEREDNoble Park North, VIC•2d
- Kenwood A 94 75W/ch Vintage Stereo Amplifier, Equalizer, PHONO portsScammers dont waste your time. PLEASE CONTACT FOR POSTAGE. Comes with Original remote and manual It has Equalizer and PHONO ports. It is Made in Japan, see photos. It is Australian model, see photos. This A-94 A94 is a very High-End amplifier to produce high quality, clear & detailed sound. Flawless, pristine condition, no damage or dents as taken care well. Working perfectly, selling because trying to downsize. You can check and test when pickup, I have high quality speakers t$500SHIPPING OFFEREDBeaconsfield, VIC•25w
- Amplifiers, FM/AM, CD players.....B&O Bang & Olufsen Beomaster 5000 Receiver, tuner, amplifier Type 2325 with master remote panel. Working well-$350 pic 2 Kenwood SS-79 AV Surround Sound Processor w/ Dolby Surround-$80 pic 3 Yamaha RX-V393 Dolby Pro Logic Surround Sound AV Home Theater Receiver with remote-$110 pic 4 SONY CDP-M78 CD PLAYER JAPAN no remote-$70 pic 5 SONY STR-DE497 5.1 Channel FM AM Stereo AV Audio Video Receiver (no remote)-$80 pic 5 1970s AGS A-109 Solid State Stereo Amplifier / Pre-Amplifier , Full working ordNegotiableSouth Yarra, VIC•9w
- VINTAGE YAMAHA STEREO AMPLIFIER/PHONO/CDVINTAGE YAMAHA STEREO AMPLIFIER ________________________________________ 7X SPEAKER CHANNELS 70 WATTS EACH PHONO,AUX,CD,TAPE,TUNER FM BUILT IN NO REMOTE BUT CAN BE USED MANUALY COMES WITH POWER CORD IN VERY GOOD WORKING CONDITION AND COSMETIC CONDITION WITH MINOR MARKS CAN POST OR PICK UP IS AVAILABLE DANDENONG Specifications Tuning range: FM, MW Power output: 70 watts per channel into 8Ω (stereo) Surround output: 70W (front), 70W (center), 15W (rear) Frequency respons$350SHIPPING OFFEREDNoble Park North, VIC•2d
- various amplifiersI have 4 amplifiers for sale all in working order (1) Yamaha RX-v396 stereo Amp with remote has phono input for $80 (2) yamaha RX-V365 has hdmi connections no remote $80 kenwood KRF-V5090D Audio Video Surround Receiver no remote $70 (3) SX303R has phono input no remotes $50$50Balwyn, VIC•11w
- Kenwood Micro Hi-Fi Component Stereo System RDX-M55 CD Cassette AUXKenwood Micro Hi-Fi Component Stereo System Model: RDX-M55 Cassette Player CD Player AM/FM Radio / Tuner AUX Input (Left & Right) Optical Digital Output Speaker Model Number: LS-M55-N Note: The Volume knob has broken off (still able to adjust the volume though) Note: There are stains on the drivers/speaker cones & the dust cover is pushed in (does not effect the sound) Note: The tape player tries to play tapes - sounds ok, then it changes sides. Note: The screen is DULL Note:$24.99Rowville, VIC•101w
- Kenwood Hi Fi StereoKenwood KDC-U349R 🔰 Selling this beautiful stereo that has Radio, USB and CD player. ⚠️ Price is only 💲3️⃣0️⃣. 🔷 Main features 🔹 Theft deterrent faceplate with Attention Alarm 🔹 13 Segment, 11 digit FL display 🔹 Rotary encoder and search button for easy operation 🔹 Music Search 🔹 Key Illumination 🔶 Specs 🔸 Maximum Output Power : 50W x 4 (MOSFET Power IC) 🔸 System Q EX (Preset & Manual Sound Control with 3 bands parametric EQ) 🔸 Bass Boost 🔸 Supreme 🔸 Front AUX Input$30Cranbourne West, VIC•1w
- Marantz PM-44SE stereo amplifier PHONO input made in Japan## Available, DO NOT ASK ### ### FIXED price, No offer ### ### Wheelers Hill vic 3150 ### PM-44SE Special Edition Very simplified design. 43 watts per channel Marantz stereo amplifier with PHONO input made in Japan ¥ 35,000 (released in 1995) https://audio-database.com/MARANTZ/amp/pm-44se-e.html ►Checked, tested and it's very excellent working condition, no crackle, no pop, no scratching noise., all control and lights work well. ►Cleaned in & out before sale. All the switches and control$320SHIPPING OFFEREDWheelers Hill, VIC•1d
- serviced! - Sansui D-55M stereo cassette deck player made in Japan## Available, DO NOT ASK ### ### FIXED price, No offer ### ### Wheelers Hill vic 3150 ### High quality cassette tape deck player made in Japan Serviced!! It's in excellent working conditions and sound awesome! Very excellent used cosmetic conditions. - Belt checked, it's in good working conditions. - Speed verified and calibrated if required. - All the lights work, all the features work. - Door open smooth, never stuck. - Magnetic head cleaned - mechanically check and tested - Sound is bala$180SHIPPING OFFEREDWheelers Hill, VIC•1d
- Yamaha YST-SW216 10 inch powered active subwoofer RRP$649## Available, DO NOT ASK ### ### FIXED price, No offer ### ### Wheelers Hill vic 3150 ### RP is $649, see the link https://www.digitalcinema.com.au/yamaha-yst-sw216-10-inch-subwoofer.html ►very powerful 10" sub woofer. You would not be disappointed. ►CLOSE TO FLAWLESS physical conditions ►Tested in excellent working conditions. Solid and deep bass. Yamaha 10 Front Firing SW216 The Yamaha 10 Front Firing Sets a high standard for subwoofers in this class, with high dynamic power and low-aud$180SHIPPING OFFEREDWheelers Hill, VIC•1d
You don't have any recently viewed items
Any items you have viewed recently will be displayed here
•••• ••• 4363