2650 Results: New & Used in Construction Vehicles & Equipment in Australia

Unit / Fleet: R1844 Make: Nissan Model: P1F1A18DU Serial Number: P1F1-401434 Nominal Lift Capacity: 1800kg Fuel Type: LPG Transmission: Automatic Equipment Type: Forklift Mast Type: 3 Stage Lift Height: 4750mm Tyre Type: Pneumatic Flashing Beacon: Yes Work Lights: Yes Hydraulic Valves: 3 Fork Length: 1070mm Seat Belt: Yes Attachments / Notes: Sideshift *Excludes GST

• 5900 hr

Komatsu 655-5 Grader, Circa 2014 model with only 5890 hours showing, good tyres all around, 14 foot blade, very tight machine with minimal wear. This machine is very tidy and can go straight to work. $235,000 Plus GST.

• 11706 hr

Price Excluding GST: $460,000 GST amount: $46,000 Total Price (inc GST): $506,000 Caterpillar D8T Dozer Single tilt S/U S/S Ripper M/S Ripper box included Handrails Idle time = 2,910hrs

• 4499 hr

Price Excluding GST: $60,000 GST amount: $6,000 Total Price (inc GST): $66,000 Hitachi LX70-5 Wheel Loader Hydraulic quick hitch

Speed Till Disc Barrett 32 Plate 4 metre 3PL Sealed Bearing. 2300kg. 600mm disc with hydraulic lift crumbler. Trailing version $28500

Speed Till Disc 28 Plate Barrett 3700mm cut with crumbler. 600mm scollop disc. Sealed bearings. Trailing version $25000

Caterpillar 323 Excavator, 23 Tonner, 2021 model as new condition with only 700 hours , Hammer piping, GP Bucket Cat double locking quick hitch, Burst safety valves, double battery isolation, E Stops etc. This machine is like new condition. $350,000 plus GST

The FEMAC T7 Hydraulic Mulcher attachment is a high quality, Italian built, flail mower attachment with 125 cm cutting length for 5 – 8 tonne excavators. It is suitable for land clearing and mulching. Available with blade flails that cut up to 6 cm and hammer flails that cut up to 8 cm diameter branches. Made in Italy by FEMAC SRL PRICE: $10,890 incl GST AUSTRALIA WIDE DELIVERY AVAILABLE Features - 1250 mm cutting width - 34cc hydraulic motor, required oil flow 80L/min - Hammer teeth - Hit

The FEMAC T5 Hydraulic Flail Mower/Mulcher attachment is a high quality, Italian built, flail mower attachment with 100cm cutting length for 4 – 6 tonne excavators. It is suitable for land clearing and mulching. Available with blade flails that cut up to 3cm and hammer flails that cut up to 5cm diameter branches. Made in Italy by FEMAC SRL Price: $9,735 incl GST AUSTRALIA WIDE DELIVERY Features - 1050 mm cutting width - 16cc hydraulic motor, required oil flow 30L/min - Rear Roller - Hammer

• 7127 hr

Forklift JCB 930 All Terrain 4x4 A/C 2014 3 Tonne. 7127 hours. 4600mm height. Side shift. 2014.

• 2918 hr

Stand on Loader Ditch Witch SK650 Tracks 2011 Diesel. 2918 hours. With kubota engine on tracks. Quick release bucket.

In Stock Now, HD Quality. View Redmond Sawmill 10km North Albany on HWY Good Quality Heavy Duty Construction With Suitability For Both Loader and Skidsteer Machines. Various Hitch Plates Also Available Slasher 45"(1145mm) $5450 60"(1524mm) $5950 72"(1828mm) $6450 Skidsteer or Loader Rock Bucket 60"(1524mm) $2450 72"(1828mm) $2750 Skidsteer 4in 1 Bucket 60"(1524mm) $3250 72"(1828mm) $3350 Skidsteer Log Grab Multi Sizes Tags Mustang Bobcat Cat Kubota Volvo Skidsteer Clark Manitou Freight Ava

D11 n / r /t tracks turned Bushes new caterpillar seals relugged 28 inch Track plates fully reconditioned 191 mm link height

Carry dozer blade located north Queensland with push arms

Komatsu D 475 tracks turned bushes done 1000 hours since they were turned aprox not 100 percent sure but have done work 32 inch wide plates 65 mm lug height ready to go

D 11 R dozer chain one of good link height near new height

Genuine cat D-10 r trackgroup turned pins and bushes genuine cat seals used 24 inch relugged track plates Located perth

• 0 hr

Reconditioned Genuine Caterpillar tracks 164 mm link height turned bushes new genuine cat seals fitted relugged 24 inch wide Track Plates new bolts and nuts fitted 43 links like new on links 2 mm worn from new height

D11 N/ R Blades with push arms can be modified to suit later modle dozer

TECHNICAL DETAILS Gripping range: 50— 600 mm Inside height: 185 mm Gripper length: 350 mm Working load limit: 600 kg Dead weight: 31 kg Surface protection: Galvanised Price: $2,000 GST AUSTRALIA WIDE DELIVERY The Probst TSZ-UNI is a mechanical grab suitable for handling steps, kerb stones and L-stones. The Probst grabs are ideal for use with any machine with sufficient lift capacity such as cranes, mini loaders, wheel loaders, skid steers, cranes and excavators. The Prob

Technical specifications Gripping range: 0 – 750 mm Inside height: 255 mm Gripper length: 420 mm Working load limit: 1,500 kg Dead weight: 85 kg Surface protection: Galvanised Price: $4,000 GST AUSTRALIA WIDE DELIVERY The Probst FTZ-UNI-15 is a mechanical block grab suitable for handling heavy concrete blocks, sandstone blocks, prefabricated concrete walls, steps and pavers. This block grab is a powerful and secure option for heavy lifting in landscaping and construction. The Probst grabs

Unit / Fleet: U5625 Make: Clark Model: C35 Nominal Lift Capacity: 3500kg at 500mm load Fuel Type: LPG Transmission: Automatic Equipment Type: Forklift Mast Type: 3 Stage Lift Height: 4620mm Tyre Type: Solid Flashing Beacon: Yes Work Lights: Yes Hydraulic Valves: 3 Fork Length: 1525mm Seat Belt: Yes Attachments / Notes: Fork clamp *Excludes GST

The GSR 190THD Truck mount is a Stick Boom lift with a working height of up to 18.52m and a 2 person basket with a maximum rate capacity of 220 - 250 kg. The GSR E190THD only sits on a 7.5T GVM Cab Chassis and can still manage 18.52 m of working height, 16.52 m of platform height, and 13.60 m horizontal reach. It features internal protected hoses with self-cleaning brushes on the telescopic sections to prevent ingress of dirt and other debris. The GSR 190THD is particularly suited to heavy duty

Free Tilt Bucket (Value: $1800 AUD ) For UHI Melbourne only! 2023 UHI New Model Released UME15,14HP Kubota Engine 10.2kw! *Free 200mm, 400mm, 600mm and 1000mm Mud Bucket, thumb grabber, Ripper, rake and Quick Hitch *Free Toolbox and filter set *3 Years National Parts Warranty Special: $18990 inc. GST Specification: Operating weight: 1450kg Overall dimension(L*W*H): 2330mm x 1130mm x 2320mm Engine: Kubota D722 10.2kw/2300/r/min Max. Flow 20 L/min Max digging depth: 2167mm Max digging

Forklift Crown CG2.5 2.5 Tonne Gas Container Mast Side Shift 2011. 3 stage container mast. Fork positioning. 9564 hours.

Forklift Jib 2500kg Long 185 X 65 Mm Fork Pockets. 3.5m reach when fully extended allowing for long reach lifts. 2.1m overall length when retracted. Supplied with safety swivel hook and shackle. Slip-on attachment and safety. Zinc finish. Ph:

• 7388 hr

Komatsu FG35T-7 LPG Forklift - 3,500KG Lift Weight Capacity at 600mm - 3.7Metre Lift Height - LPG Fuelled - Clear Mast - Fork Positioners - 1.5Metre Long Fork Tynes - Cushion Tyres - Nissan 6 Cylinder TB4Z Engine - Automatic Transmission - Power Steering - Low Hours - New Paint Unit fully serviced prior to delivery. ATTACHMENTS - Slippers, Jibs etc. can be supplied and fitted, simply let us know what your requirements are! STOCK #L038 Ph: (02) *****9777

Exchange Genuine Cat Cored Rollers cat centre cat seals cat orings cat oil on exchange Basis only your rollers must be still lubricated 4000 hrs warranty the same warranty as Cat

Unit / Fleet: U5554 Make: Toyota Model: 32-8FG25 Year: 2010 Serial Number: 32206 Nominal lift capacity: 2500kg Fuel Type: LPG Transmission: Automatic Equipment Type: Forklift Mast Type: Three Stage Lift Height: 4500mm Tyre Type: Puncture Proof Work Lights: Yes Flashing Beacon: No Hydraulic Valves: 3 Seat Belt: Yes Attachments / Notes: Sideshift