0 Results: tri hull in Gosford 2250, NSW

• Multi Hull
• 21 ft
• Glastron

Glastron V214 Tri Hull Bowrider and custom dual axle trailer Old School Glastron V214 Tri Hull Bowrider. Quite rare and doubtful if more than a few left in Australia now. Last registered 1989 .Build number 304.21 Ft. Originally running a 305 Chev inboard with a Kiekhaffer ( early Mercruiser leg ) since removed and unavailable. Originally Imported from the US and sold by the Glastron Australia subsidiary in Dandenong Custom built trailer for this hull . Unregistered with no VIN or stamped number

• Multi Hull
• 35 ft
• Catamaran

Banshee 35 Catamaran.Designer:Richard Woods.Builder:Palamos Boatyard England.Hulls are foam sandwich down to the waterline,and then solid glass in the water.Decks are foam sandwich with marine ply in high load areas.New standing and running rigging 24/3/23.New windows 2022.Engine:Yanmar D27, diesel outboard.115 litres fuel.2 water tanks,approx 200 litres water.Rutland wind generator,4 35watt solar panels,tow generator.12v fridge,800 watt inverter,Raymarine st4000 tiller pilot and spare.Fully ba

• Multi Hull
• 25 ft
• Aluminium

Up for sale the local ferry/water taxi this boat has been used to ferry people around port Stephens for past few years running twin 150hp Yamaha’s recent works carried out on hull for any enquirers please message or or call

• Single Hull
• 30 ft
• Offshore

Pro Marine 30' (9.1m) long by 9.4 (2.88m) wide 2 x 200hp Suzuki V6 Four strokes. Running draft is 0.5 with motors trimmed up, 0.85 with motors trimmed down. Custom build for Coast Guard. Lock up cabin with forward V bunks. In commercial survey 2D, 2C, 4D. Can operate with 1 crew and 7 Passengers or hire and drive with 8 people. 2018 Suzuki V6's in perfect working order and perfect visual condition, always flushed with fresh water after use. Pre plumbed washout system installed (no need to run t

• 12 ft

Diablo Stand up Kayaks Why We’re Different. We’ve been paddling for years, but never have we come across a boat that was designed for our local waters with all the functions that we wanted. Growing up in Texas, most years we don’t have water and when we do, it is cherished. We wanted to design a boat that would not only float, but maneuver well in the shallowest water possible, even with a lot of weight on top. In addition to this we wanted it to be comfortable, stable and have the option to s