156 Results: 5 ton excavator buckets in Australia (Page 5 of 7)

The price includes GST. Used 600mm Excavator GP Digging & Trenching Bucket suit 4-9 Ton machines. Condition is used but there is still plenty of life left. Fitted with 4 Teeth. There is also extra wear strips welded underneath for durability (see pic# 10). Current Headstock configuration: 50mm Pin Diameter, 290mm Center to Center, 198mm Between the Ear Plates (167mm Between the Ear Bosses which can be shaved back up to 198mm if you need more inside width for your hitch or dipper arm to fit i

All prices include GST. Normal retail price from Melbourne Tractors Group is $1980. Our price $1050 without the Pins, $1150 with Pins. New 600mm Excavator GP Digging & Trenching Bucket suit 5-10 Ton machine. This is a high quality hardened steel, well engineered bucket made by KenBuilt / Melbourne Tractors Group. Has removable side cutters and there are extra wear strips underneath. Has tapered sides so mud slides out easy and minimises ground resistance. The buckets are New & Unused but h

• 2515 hr

This 3.5ton Excavator is the perfect all round size! With the extra swivel bucket on the head making it super handy and more precise! Bought from a local earth mover a couple years ago, (they bought it new) I had a lot of projects at home to do and has been the handiest asset. Hours: 2515 In very good condition. This is just machine and buckets, I have no trailer for it.

The price includes GST. Used 650mm Excavator GP Digging & Trenching Bucket suit 4-10 Ton machine. Condition is used but there is still plenty of life left. This is a good solid bucket with 4 almost new Teeth fitted. Has tapered sides so mud slides out easy and minimises ground resistance. There is also extra wear strips welded underneath for durability (see pic# 10). There is also a lifting hook with safety latch fitted on the rear (see pics# 4-9). Current Headstock configuration: 50mm Pin

The price includes GST. Used Excavator Hydraulic Coupler Quick Hitch to suit 9-18 Ton machines. Designed for Kobelco SK100 / SK115, Komatsu PC100 / PC120 / PC128 / PC138 / PC150 / PC158 / PW100, New Holland EC160 / EW160 / EW200 / FX140 / FX200 etc. but will fit other machines (see below list of machines we have found so far). Condition is used but is in great shape with plenty of life left. 60mm Pin Diameter. 400mm Pin Center to Pin Center (CtoC). Between The Ears (BTE): 252mm width where

The price includes GST. 60mm pin Excavator / Backhoe Headstock to suit 9-20 ton machines. There is some light surface rust and a few small dings but is otherwise in great condition. Designed for Kobelco SK100 / SK100LC / SK115SR, Komatsu PC100-3 / PC100-5 / PC100-6 / PC120 / PC120 Mighty / PC120-3 / PC120-5 / PC120-6 / PC128UU-2 / PC150HD / PW100-1 / PW100-3, New Holland EC160LC / EW160 / EW200 / FX140 / FX200 etc. but will fit other machines (see below list of machines we have found so far).

The price includes GST. Used 1200mm Excavator Mud Bucket suit 5-11 Ton machine. Condition is used. It has some light rust pitting inside the bucket, but is otherwise a great sturdy bucket with plenty of life left. It has a bolt-on front cutting edge and there are extra wear strips welded underneath for durability (see pic#10). One of the wear strips has a crack at each end that could use a weld or 2 if you plan to be doing heavy work with it. This is a quality bucket made in Australia by Oz

The price includes GST. Used 1500mm Atlas Heavy Engineering Excavator Hydraulic Tilting Mud Batter Bucket suit 9-20 Ton machines, with Topcon TS-1 Tilt Sensor. Designed for Hitachi EX110-5/EX135/EX120-2/EX120-3/EX120-4/EX120-5/EX135UR, Hitachi Zaxis 135US, John Deere 135C RTS, Kobelco K905/SK120/SK130/SK135/SK135SR, Sumitomo SH120-3/SH125-3/SH125X-3/SH130-5/SH135-3/SH135X-3, Takeuchi TB1140 etc. but will fit other machines (see below list of machines we have found so far). Twin Ram design, t

The price includes GST. New 65mm Pin Excavator 5 Finger Mechanical Grapple Grab suit 8-20 Ton machine. Full range of Motion and Opening Grapple Grab without needing any Hydraulic lines. The top bracket of the Grab mounts around your Excavator's Dipper Arm (see pic# 10) and you simply use your hand control that would normally Curl your bucket to open and close the Grab. Ideally designed for Rock, Log & Trash work, but can also be used for light-medium duty Demolition and general material hand

The price includes GST. 70mm pin Excavator / Backhoe Headstock to suit 12-21 ton machines. There is some light surface rust and a few small dings but is otherwise in good condition, was cut off a bucket to fit a different sized headstock. Designed for Hyundai R160LC-3/R170W/R180LC-3, Kobelco ED180/SK160LC/SK170-6E, Komatsu PC150/PC150-5/PC150-6/PC160/PC160-6/PC160LC-7/PC180, New Holland EH160LC etc. but will fit other machines (see below list of machines we have found so far). Can be used fo

The price includes GST. Used 980mm Excavator GP Digging Bucket suit 12-36 Ton machine. Condition is used but there is still plenty of life left. This is a heavy duty bucket with 35mm thick headstock ears, side cutting edges & reinforcing plate. There is also extra wear strips welded underneath for durability (see in pic #9 & #10). There is one tooth missing. Current Headstock configuration: 70mm Pin Diameter (inside Bosses thick enough to be bored out to suit 80mm or 90mm pins), 531mm Center

The price includes GST. Used Excavator Hydraulic Quick Hitch Coupling to suit 15-32 Ton machines. The front hooks that grab the bucket's front pin have been extended (see pics# 4, 6, 9) to pick up attachments with a longer Pin Center spacing (full details below). Condition is Used, but is otherwise in good working condition with plenty of life left. Has Rear Lifting Eye Hook. *** Pin Setup Dimensions (where your Dipper Arm/Stick goes in): * Pin Diameter: 80mm. * Pin Center to Pin Center (

The price includes GST. New 80mm pin, 600mm Doherty Excavator Deep Trenching Cleanup Gummy Banana Bucket suit 15-32 ton machine. This is a thick & sturdy, well built bucket. The front cutting edge plate and Ear Plates are 32mm thick. Current Headstock configuration: 80mm Pin Diameter, 475mm Pin Center to Pin Center (CtoC), 336mm Between the inside Ear Bosses (which can be shaved back up to 356mm between the Ear Plates if you need more inside width for your hitch or dipper arm to fit in). Sho

The price includes GST. New 1200mm Excavator Skeleton Sieve Riddle Bucket suit 15-30 Ton machine. Front digging edge is 40mm thick and 300mm deep. Extra side cutter plates welded on. Current Headstock configuration: 80mm Pin Diameter, 452mm Pin Center to Pin Center (CtoC), 328mm Between the inside Ear Bosses (which can be shaved back up to 387mm between the Ear Plates if you need more inside width for your hitch or dipper arm to fit in). Should fit: Case 9021 / CX210 / CX210B / CX225SR, Cat

The price includes GST. New 1200mm Warrior Heavy Duty Excavator GP Digging Bucket suit 15-32 Ton machine. This is a very thick & sturdy, well built bucket. The front cutting edge plate is 40mm thick! It has a deep profile for a high capacity of 0.96 cubic meters. It has removable bolt-on Side Cutters. There are extra wear plates attached to the sides and also extra wear strips welded underneath for durability (see pic# 10). Current Headstock configuration: 80mm Pin Diameter, 460mm Pin Cent

The price includes GST. 90mm/80mm pin Excavator Headstock to suit 17-36 ton machines. There is some surface rust and light pin wear but is otherwise in good condition. Can be used for a mounting headstock for a Rock Breaker Hammer or Auger, or mount as a regular headstock for buckets and other attachments etc. The 2 fins could be cut off to make a standard flat plate headstock. The 90mm Pin could be milled down in the middle to make an all-80mm pin headstock. Or the 80mm pin could be sleave

The price includes GST. Used 1250mm Excavator Flat Edge Blade Trenching Bucket suit 18-36 Ton machine. Condition is used but there is still plenty of life left. This is a good solid bucket with bolt-on side cutting edges & thick front edge cutting plate. There is also extra wear strips welded underneath for durability (see pic #10). There is a small tear near the rear of the left hand side (see pic #9) which can be easily welded up. Current Headstock configuration: Front Pin Diameter is 90mm

The price includes GST. 90mm pin Excavator / Backhoe Headstock to suit 20-36 ton machines. There is some light surface rust and pin wear but is otherwise in good condition. Can be used for a mounting headstock for a Rock Breaker Hammer or Auger, or mount as a regular headstock for buckets and other attachments etc. Headstock setup: 90mm Pin Diameter, 500mm Pin Center to Pin Center (CtoC), 340mm Between the inside Ear Bosses (which can be shaved back up to 364mm between the Ear Plates if you

The price includes GST. As New Excavator Hydraulic Coupler Quick Hitch to suit 22-40 Ton machines. Designed for: Case CX240 / CX290 etc. but will fit other machines (see below list of machines we have found so far). Condition is Used, but has almost no use and there is no wear on either the pins or the hooks, just has some chips on the paint. Has Lifting Eye Hook (see pics# 1-4). Pin Setup Dimensions (where your Dipper Arm goes in): * Pin Diameter: 90mm. * Pin Center to Pin Center (CtoC): 4

The price includes GST. New Doherty D-Lock Excavator Hydraulic Quick Hitch Coupling to suit 20-36 Ton machines. 90mm pin machine can pickup both 80mm & 90mm pin attachments! D-Lock Quick Coupler, Fully Automatic with Dual Pin Locking (no need to leave the cab to remove / re-insert the safety pin). This is a Multi Pin Center pickup hitch so it can grab buckets used on other machines with a 438mm-521mm Pin Center to Pin Center range. Very low profile & light weight. Lifting Eye rated: SWL 16,

The price includes GST. Used G-Tex Excavator Hydraulic Coupler Quick Hitch to suit 20-36 Ton machines. Designed for Komatsu PC300/PC340/PC350/PC360 etc. but will fit other machines (see below list of machines we have found so far). Condition is used with a few bangs and scrapes but is otherwise in good condition with plenty of life left. This is a quality built Hitch made in Australia by G-Tex. 90mm Pin Diameter. 513mm Pin Center to Pin Center (CtoC). Between The Ears (BTE): 340mm width whe

The price includes GST. 90mm pin, 750mm Titan Excavator GP & Trenching Bucket suit 22-40 ton machine. It has tapered sides so mud slides out easy and minimises ground resistance and there are extra wear strips welded underneath for durability (see pic# 10). The front cutting edge plate is 50mm thick! Condition is used but it has had very little use, with minimal wear on the teeth and almost no wear on the side cutting edges. This is a thick & sturdy, well built bucket, made in Australia by

The price includes GST. New 800mm AHE Excavator Digging & Trenching GP Bucket suit 15-40 Ton machine. This bucket is surplus stock from Atlas Heavy Engineering (AHE): https://ahe1.com.au. It has a deep profile and is in perfect New condition. It has removable bolt-on Side Cutters and is fitted with Genuine Caterpillar Teeth. There are also extra Wear Strips welded underneath for durability (see pic #10). The cutting edges of the sides of the bucket are 32mm thick. *** Current Headstock c

The price includes GST. 90mm pin, 800mm Turners Engineering Excavator GP & Trenching Bucket suit 20-48 ton machine. The Pin Holes could be bored out to take 100mm Pins (see list of machines it should then fit below...). It has tapered sides so mud slides out easy and minimises ground resistance and there are extra wear strips welded underneath for durability (see pic# 10). It has removable bolt-on Side Cutters, and the front cutting edge plate is 50mm thick! Condition is used but it has had