11 Results: New & Used in yamaha in Canada Bay Area, NSW

Nice quality Yamaha RX-V392 Natural Sound Stereo/Pro Logic/5.1 Receiver Amplifier from the 1990's. Usual Tone Controls plus Effects array. Centre and Rear Levels adjust. A&B Stereo Speaker outputs 2x Centre and Rear Speakers Phono, AM/FM, CD, 2ch/6ch Video , VCR Tape Monitor Inputs Fluro Display with Inputs, Effects, Frequencies, Signal Strength, FM Stereo Indication, Audio Options, Speakers. Auto / Man Tuning. Presets Rear / Centre / Subwoofer Pre Out. NO REMOTE. Very Good Condition w

2 Speakers, good condition, nice sound. 6 Om, https://www.ebay.com.au/itm/314348860491

Yamaha ATS-1080 soundbar, works perfectly and has the latest firmware installed for HDMi compatibility. Some cosmetic scratches on the rear. Cash only and pick up only

Nice simple great quality Yamaha HTR-3067 Home Theatre Receiver - No Remote Specs below: 5-channel powerful surround sound 100 W per channel (8 ohms, 1 kHz, 0.9% THD, 1-ch driven) 70 W per channel (8 ohms, 20 Hz-20 kHz, 0.09% THD, 2-ch driven) Discrete amp configuration HDMI (4 in/1 out) with 4K Ultra HD pass-through for super high resolution images Front panel USB digital connection for iPod and iPhone Virtual CINEMA FRONT provides virtual surround sound with five speakers in front Extra Bas

Nice simple great quality Yamaha Home Theatre Receiver - No Remote Specs below: 5-channel powerful surround sound 100 W per channel (8 ohms, 1 kHz, 0.9% THD, 1-ch driven) 70 W per channel (8 ohms, 20 Hz-20 kHz, 0.09% THD, 2-ch driven) Discrete amp configuration HD Audio format decoding: Dolby® TrueHD and DTS-HD Master Audio™ Dolby® Digital Plus and DTS-HD High Resolution Audio™ 192 kHz/24-bit Burr-Brown DACs for all channels High dynamic power, low-impedance drive capability Low jitter PLL ci

Nice quality Yamaha RX-595 Stereo Receiver from the 1990s. Usual Tone Controls plus Loudness, High Filter and Mode. A&B Stereo Speaker Outputs. Phono, AM/FM, CD, Tape 1&2 and LD/TV Inputs with CD and Pure Direct. Full Dub Select. Fluro Display with Inputs, and Frequencies plis Signal Strength and FM Stereo Indicator. Auto / Man Tuning and Array of Presets. NO REMOTE. Very good Condition with a couple of light marks. I sell Retro Hifi professionally so all my equipment is cleaned, tested and ope

Good quality big Yamaha RX-V992 Stereo Dolby Surround Receiver. NO REMOTE. Specs below: Large range of Inputs. Tuning range: FM, MW Power output: 80 watts per channel into 8Ω (stereo) Surround output: 80W (front), 80W (center), 80W (rear) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.025% Damping factor: 160 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 86dB (MM), 96dB (line) Channel separation: 55dB (MM), 45dB (line) Output: 150mV (line), 2.6V (Pre out)

Yamaha Home Theatre Receiver - No Remote Specs below: Tuning range: FM, MW Power output: 100 watts per channel into 6Ω (stereo) Surround output: 100W (front), 100W (center), 100W (rear) Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.9% Input sensitivity: 200mV (line) Signal to noise ratio: 100dB (line) Channel separation: 45dB (line) Output: 200mV (line) Digital inputs: coaxial, optical Video Connections: component, composite Dimensions: 435 x 151 x 317.6mm Wei

Nice quality Yamaha Home Theatre Receiver - No Remote Specs below: Power and Processing: 5-channel amplifier 85 watts per channel into 8 ohms (1k Hz) at 0.9% THD, with 2 channels driven Dolby® TrueHD, DTS-HD™ Master Audio, Dolby® Digital Plus, DTS-HD™ High Resolution Audio Cinema DSP modes add richness and presence to music and movie soundtracks YPAO (Yamaha Parametric Room Acoustic Optimizer) for easy automatic speaker setup and more precise surround sound (microphone included) Ad

Good quality big Yamaha RX-V740 AV Receiver - No Remote Specs below: Tuning range: FM, MW Power output: 90 watts per channel into 8Ω (stereo) Surround output: 90W (front), 90W (center), 90W (rear) Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.06% Damping factor: 100 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 86dB (MM), 100dB (line) Channel separation: 55dB (MM), 45dB (line) Output: 150mV (line), 2.4V (Pre out) Speake

Good quality Yamaha HTR-6230 Home Theatre Receiver - No Remote Specs below: Tuning range: FM, MW Power output: 100 watts per channel into 8Ω (stereo) Surround output: 100W (front), 100W (center), 100W (rear) Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.06% Input sensitivity: 200mV (line) Signal to noise ratio: 100dB (line) Channel separation: 45dB (line) Output: 200mV (line) Speaker load impedance: 6Ω (minimum) Digital inputs: coaxial, opt