26 Results: New & Used in 1967 xr falcon in Australia

Here we have a Right hand rear outer door handle for a Ford Falcon Fairmont XY XW XT or XR as well as Fairlane ZA ZB ZC or ZD sedan or wagon . This is in roadworthy , good Condition and although it’s no perfect it will look great with a good polish up It’s a genuine original part , it will look good on the car as seen in the photos and it will need a good clean up . To suit a******1967******1969******1971 and 1972 model . I have other early ford parts I will list as I empty the shed. It has b

Hello Everyone, I am offering up for sale, front and rear bumpers with over riders for either a 1967 or 1968 XR or XT Falcon Sedan, the bumpers do not come with the bumper irons or chrome attaching bolts, neither do the front indicator assemblies, plus the Right Hand Side Rocker Panel Molding, also have included in the price, the Left Hand & Right Hand rear wheel arch moldings, all the parts are not in concourse condition, for the build that is in progress, I have better pieces, local pick up o

1967 XR Falcon Grille in good condition

XR GT Falcon Ford Autolite carburettor C 7DF-L for recondition condition unknown as is maybe missing some parts 1967

What you are buying here is the standard repro/concours (2 x piece) plastic front spoiler, originally for the Ford XW-XY, but will also fit the Ford XR-XT. This came with the 1967 Ford XR project car I bought. It was new and assembled, but never fitted to the car. I didn’t want a front spoiler on an XR so I’m moving it on. As it was assembled using the adhesive backing for the centre support, I won’t be pulling it apart so it’s pick up only. It doesn’t have the 2 small chassis mounting brackets

FOR SALE FORD 8 3/4" DIFF CENTRE OPEN NON LSD - THIS CAME OUT OF A ZIRCON GREEN XT FAIRMONT 35 YEARS AGO - I JUST REBUILT IT TODAY WITH ALL NEW USA TIMKEN BEARINGS, THE GENUINE FORD GEARS WITH MINT - ITS BEEN PROFESSIONALLY SETUP AND IS READY TO INSTALL - CASE FORD PART # C6OW-4025-A - CAST DATE 6L12 (12th November 1966) NOTE THERE IS NO PROVISION IN CASE FOR OIL FILLER SO MAKE SURE IT MATCHES YOU HOUSING WHICH WILL HAVE A PLUG IN THE BACK TO FILL WITH OIL THIS IS A 8" OR 8 3/4" AS USED IN

FOR SALE 1965 TO 1967 FORD 289 WINDSOR ENGINE WATER PUMP PULLEY WATER PUMP PULLEY - FORD PART # C5AE-8509-B http://www.mustangtek.com/pulley/C5AE-8509-B.html AS USED ON MANY FORD CARS & TRUCKS******1966 1967 INCLUDING XR XT FALCON FAIRMONT FAIRLANE MUSTANG COUGAR PICKUP FROM GOLD COAST - OR CAN ARRANGE FREIGHT ANYWHERE IN AUSTRALIA AT YOUR COST

FOR SALE 1968 FORD 302 351 WINDSOR ENGINE WATER PUMP PULLEY TO SUIT FACTORY A/C P/STEER CAR WITH TWO FAN BELT WATERPUMP PULLEY - FORD PART # C7OE- 8509-D AS USED ON MANY FORD CARS & TRUCKS******1968 1969 INCLUDING XR ZA FALCON FAIRMONT FAIRLANE MUSTANG COUGAR FAIRLANE http://www.mustangtek.com/pulley/C7OE-8509-D.html PICKUP FROM GOLD COAST - OR CAN ARRANGE FREIGHT ANYWHERE IN AUSTRALIA AT YOUR COST

FOR SALE 1967 FORD 289 WINDSOR ENGINE CRANK PULLEY TO SUIT FACTORY NON A/C NON P/STEER CAR (THE WAY THEY ARE SUPPOSE TO BE) WITH SINGLE FAN BELT CRANK PULLEY - FORD PART # C7OE- 6A312-C AS USED ON MANY FORD CARS & TRUCKS******1967 INCLUDING XR ZA FALCON FAIRMONT FAIRLANE MUSTANG COUGAR FAIRLANE PICKUP FROM GOLD COAST - OR CAN ARRANGE FREIGHT ANYWHERE IN AUSTRALIA AT YOUR COST

XR FALCON HORN RING THATS NOT BROKEN . HAS A LITTLE BIT OF PITTING SEE PICTURES BUT OVER 55 YEARS OLD ,. COMES WITH THE ATTATCHING CLIPS ON THE BOTTOM . ITS A GOOD HORN RING FOR A SURVIVOR CAR . CALL IF INTERESTED . CAN POST FOR $16.00 OR PICK UP IS IN MT WAVERLEY VIC

What you are buying here are a set of 4 x brand new Superlite/Minilite 15” (inch) rims to suit most Fords from the XR-XY, XA-XC, XD-XE etc, up to about 2005 that have the standard ‘5 x 114.3’ wheel bolt pattern. I purchased these a couple of months ago from CANTERBURY TYRE AND MAG SUPERMART for $1320 (see invoice included with purchase) but changed my mind before they even arrived, as the wheels I originally wanted, had unexpectedly become available. The fronts are 15 x 7 inch (with a standar

Here we have a Left hand rear outer door handle for a Ford Falcon Fairmont XY XW XT or XR as well as Fairlane ZA ZB ZC or ZD sedan or wagon . This is in roadworthy , good Condition and although it’s no perfect it will look great with a good polish up It’s a genuine original part , it will look good on the car as seen in the photos and it will need a good clean up . To suit a******1967******1969******1971 and 1972 model . I have other early ford parts I will list as I empty the shed. It has be

What you are buying here is a genuine rear-view mirror that came out of a 1967 Ford XR Falcon 500. The frame, mount bracket and mirror glass are all still in very good original condition for its age. There is the tinniest mark on the glass (see last photo) but this is not noticeable when mounted in the car and could possibly be polished out. (Only removed due to replacing it with a repro chrome version) I have other XR Falcon parts for sale for combined postage if required. POSTAGE IS $

1967 Ford XR Falcon GT Fairmont taillights x 4 2 x frames in VGC Other 2 frames light damage All red brake light lenses x 4 original Lucas and all look undamaged with original good colour. 2 Falcon (round) inner frames look complete with light pitting and faded original orange indicator lenses, 1 is cracked. 1 Fairmont inner frame in Very good condition with original indicator lens with good original colour. Almost all wiring and plugs / grommets intact, original and in great condition.

Ford 1967 XR Falcon Fairmont Headlight Surrounds, both sides have seals intact, Right side has light tap, see other listings for matching grille

Ford 1967 XR Fairmont original or Falcon GT Glovebox incl. Woodgrain trim in great condition and locking mechanism, (missing badge) no key but is unlocked, had been bare metalled but primed in zinc

NOS (new old stock) Ford original Falcon XR XT sedan boot lock barrel and keys. These are the original correct XR XT keys for for that the cars had when brand new. Can post at your expense. Note, no box included - it’s just the boot lock barrel and keys as pictured

XR XT XW XY Falcon Boot Trunk Lid Latch also fits 1967 / 1968 Ford Mustang Pick up Lilydale or can post - East Coast Mustang and Camaro -

XR GT dash repo Comes with all guages Done in STEEL CHROME ON PLASTIC Not spray chrome Woodgrain Your XR falcon is needed Call for info Thank you

Ford falcon Fairmont******1967 Xr short air vent cables good condition

4 x 1966 or 1967 XR FORD FALCON Sedan , Station Wagon , Ute or Panel Van Interior Door Handles in OK used condition but chrome is not good . $48.00 for all 4 or $15.00 each . Postage $12.00 .