18 Results: New & Used in laser boat in Australia

• Single Hull
• 14 ft
• Laser

This is a lovely 2016 ILCA Laser (211547) which has both a Radial and 4.7 bottom mast section. It was purchased from the original owner in 2023 who only sailed the boat a few times before storing it undercover in his house. It has been regularly used by us for the last year. The hull has no cracks or blistering in the fiberglass and is water tight. There are a few minor cosmetic scratches (see pictures). The hull is in great condition overall, and this is a very light and competitive boat. The

• Single Hull
• 14 ft
• Laser

Laser with full rig, older boat in good condition, comes with launching dolly, 2 sails one used 10 times and on a roadworthy but unregistered Bee Jay trailer

• Single Hull
• Other

Laser road trailer. Galvanised custom made for standard Laser hull. Easy to load and light. Trailer rego has expired. Have sold the boat so trailer has to go. First in with $300 gets it.

• Single Hull
• Laser

ILCA7 full rig Carbon mast, tiller Spare mast, dry stored, good beach trolley. PFD and boots 13.

• Laser

Self-bailer part including new washers (I will fit them for you before shipping). Work perfectly well. I thought I had broken mine, so I ordered a whole new part inclusing some spare washers, but it was not until I went to replace it on my boat, that I realised that only the washers were broken. So I spent nearly $90 on parts instead of a couple of dollars. I installed the new bailer on my boat and selling the older one. The push metal is a bit corroded but I will clean it as well before shippi

Laser Dinghy 103625 In good to fair condition. Comes with Radial Aluminium Mast, less that 10 years old Radial sail in good condition Turbo Kit Beach Trolly Foil Bag. Performs well, hull has no leaks. Great starter boat to get into the class. Selling as I have bought a new boat. Cash only, The boat is located at Sugarloaf Sailing Club, near Yarra Glen Access Wednesdays and Weekends only.

• Single Hull
• Laser

Selling this competitive ‘ready to sail’ Laser Radial * Dry hull in great condition * 3 x Sails, all matching boat number (one in excellent condition, one in great condition and one in fair condition). * Aluminium Radial spars, (top section, bottom section and boom) * Centreboard and rudder with aluminium tiller and Ronstan battle stick tiller extension * Rooster Sailing board bag * Spare battens * Zhik hiking strap * Galvanised Dolly in good condition

• Single Hull
• Laser

Laser sail boat number 186630, (2006) with radial sail and children's sail (both in good condition) and both sets of mast on beach dolly. Racing vang, sailboat, ready to sail or race.

• Single Hull
• 13 ft
• Compass

The boat has a small leakage and the sail needs to be repaired.

• Single Hull
• 14 ft
• Laser

LASER RADIAL/ ILCA 6 Sail Number 206402 The boat has seen very little use, especially recently. As such, it has a dry hull and is in a good condition. It has been very well looked after. It is the perfect boat for someone wanting to get into club racing or for a youth sailor getting into further dinghy pathways. Included Inventory: - Sails: - Excellent radial (used one regatta) - Very good radial sail (incorrect number, can be used for training) - Good radial (incorrect sail number) - Used 4

• Single Hull
• 14 ft
• Laser

Laser / ILCA 4 or 7 Sail Number 211557 • 1 x standard sail • 1 x 4.7 sail, used 1 regatta only • 1 x carbon top mast section • 1 x 4.7 bottom mast section (ALLOY) • 1 x standard bottom mast section (ALLOY) • 1 x boom (ALLOY) • Turbo vang • Foils in excellent condition • Carbon tiller and extension • All ropes in good order and rigged for racing, replaced this year • Aluminium Dolly • Top cover, Foil bag • Boat always garage stored • Boat well maintained, minimal use and ready to race • Dry bo

• Single Hull
• 14 ft
• Laser

Laser dinghy hull and Dehavilland Bobcat hull projects. The laser hull is 41287 and in average condition, has scratches and bumps but has no fittings. The Bobcat is in reasonably good shape, has some knocks and scrapes and is 12 foot long and 3 foot wide. Both would need some parts and work to be sailable. They could also be used for other purposes such as garden or dam decoration, shed ornament, fishing boat or paddleboard etc. Note dolly and trailer shown is not available for sale in this auc

• Single Hull
• 14 ft
• Laser

ILCA number 202583 Approx 2013. New near radial and Full rig sail. 2older training sails Standard & Radial rig. Composite top Carbon tiller & extension ILCA boat cover Very good stainless dolly Very good foils in ILCA cover/bag Turbo vang system deck compass

• Single Hull
• 19 ft
• Thompson-tboats

Auckland designer Steve Thompson’s aim was to design a boat for intermediate sailors which would introduce the thrill factor without too much of the fright factor - in other words, gennakers made easy. The boat Thompson designed would represent the next step up from a Laser, with three or four crew, although two crew could manage the boat as long as they had the necessary body weight. Specifications LOA 5.85m 19.19ft LWL 5.4m 17.71ft Beam 2.2m 7.21ft Crew limit. 230kg 617lbs. Ballast 100k

• Single Hull
• Laser

Selling an older style Laser. Definitely no racing hull, but is still good for a lot of fun on the water. Comes with everything needed to transport the boat to the beach, get it to the water, launch and sail it. What is pictured comes with the dingy including the trailer registered until Dec 2024, the launching dolly, and the canvas cover. Also includes all ropes to rig it up and the instructions, with additional pictures for the rope colours for this dingy, and happy to run through it with any

• Single Hull
• 11 ft
• Laser

Euro sailing sckiff similar to Laser , similar length 3350 x 1440 mm ect Light weight. Has Carbon mast with cover , aluminium boom , cetre board and rudder , Nice main sail. dolly trolly. All in great condition. Just looking for a good home. Great condition . Good value and great sailing

• Single Hull
• 18 ft
• Johnson

Price dropped, looking to go back to aluminum , would like to see it being used 5.5m full comp bass boat 90hp Johnson. Great condition a little tlc needed . Just pulled out of the shed to get ready to fish and have decided to sell. 11 months rego. New stainless dash/control panels have been laser cut to the shape of the originals. Few new dials, and starter battery.

• Dealer
• Other

Let us make your boat windows for you from clear or tinted perspex any size from a tinny to a superyacht.We have a laser cutter and a CNC router to cut any dashboard or name plates or complex shapes and custom made cutting boards The best price on the gold coast drop in to our factory at 1 kamholtz crt