28 Results: New & Used in project in Victoria

Project boat Needs a fair bit of work Was a great boat till hubby pulled the back end off for repairs but never had time to finish it 250 ono make an offer

• Multi Hull
• 21 ft
• Sail

“Shadow” is a substantially complete conversion of a surfski to a sailing craft, intended for expedition coastal sailing. It’s designed as a tacking proa-style craft, but could be easily converted to an outrigger trimaran. It’s 6.5m long, and all modifications to the original hull have been designed to maintain its integrity and distribute sailing and ama loads. More information in this short video: https://youtu.be/VTxa_ubyJJM?feature=shared Shadow comes with a strong custom-moulded cradle

• Other

Two Catamaran Pontoon Hulls 5.46m long, paint is peeling, perfect for a pontoon project.

• Multi Hull
• 19 ft
• Bruce Harris Designed

1985 sportsmen 560 shark cat ready for rebuild already gutted on a great condition trailer comes with original windscreen and hatches just no time to go ahead with this project would be an awesome boat

• Single Hull
• 16 ft
• Cruise Craft

This is a 4.7Mtr fiberglass half cab, 115hp outboard, boat has rego until dec 2024, but can not go onto the water until the new rego number has been printed on the boat, got this boat last year with the intent to fix it back up but I have to many projects and need to move some on to other people who might be interested. Has brand new OEM started motor fitted, electric winch & duel fishfinders . There are brand new vinyl rolls of flooring to upgrade the floor surface and the wheel bearings and b

• 14 ft

Brooker tilt trailer,HT stud pattern,14ft Aluminium fishing boat project ,have a Suzuki 9.9 to go with at extra cost that ran this boat ,family owned since the early 80's

45hp Mercury outboard. Was going to cut new boards for the floor but haven't got around to it. New tires and steel rims. Is deep hull with wide gunnels not like most tinnys. No holes, has a few scratches underneath but nothing major. Last reg for both boat an trailer in SA so easy to put back on the water. Motor runs, fun project. Looking for $3,500 or will swap for the right vehicle. Message if interested.

30 foot boat. Came out of water 2019 Would be full rebuild. Or you could be creative and maybe a bed breakfast A project we don’t have time Msg or call

• Single Hull
• 15 ft
• Savage

I originally purchased this set-up for the purpose of using the trailer for another boat project, but I ended up selling the other boat and trailer as it was. So this is no longer required. The trailer is in very good condition. The hull seems to be in good condition as well. The transom is very sturdy and the floor had been redone by the previous owner. I found a small hole in the cabin floor were it looks like something was dropped (check photos). An easy repair with a cheap patch up kit. Tra

• Single Hull
• 26 ft
• Other

Plate Alloy boat 8.2 meter built to survey specifications. PROJECT BOAT, Twin Honda 90 hp outboard motors, stainless steel trailer to be registered 3.5tonn rating, new brake compressor,lines,calipers and suspension. Thousands spent great opportunity to build your dream boat cheap, need finishing.

• Single Hull
• 126 ft
• Bertram

Open boat with old 25hp Chrysler which was running but needs ilmpeller supplied.Have most parts to get started.

• Single Hull
• Bayliner

This Bayliner 3255 Avanti Express 1996 model has had major work and as new accessories installed. This is an unfinished project, only requires new or secondhand engines to be installed. Both Mercruiser Bravo transom assemblies have been reconditioned. Bravo 11 stern drives in good condition. This has a Brand new fuel tank installed and the bilge has been re-flow coated ready for engine installations. Luwmar 2.2kw bow thruster. Electric chain winch. Electric trim tabs and underwater lights. The

• Single Hull
• 13 ft
• Other

420 Sailing Dinghy Project This is a great little sailing dinghy. Ready to sail, plus a great little project to do up. Has had the ropes replaced, and trailer repaired. Purchased back in 2016. Condition is used. - 2x Masts - 3x Mainsails - 3x Foresails - Trailer Dolly - Plus more Looking for a new home. If Interested please contact.

Yamaha FZS SVHO PRICE DROP!! Still people question themselves when a FZS is around. Plenty power for stock motor, spend a little on this and it will fly litterally. 147 hours on clock Supercharged Serviced every year Always flushed after every use Usual wear and tear , overall good clean reliable ski. Starts and goes everytime. Does what it should with no hesitation. Registered till December 2024. Dunbier trailer - On rollers Mag wheels Registered till December 2024 Need gone to fund other p

• 18 ft

I'll be sad to see it go but it is a complete project, time to move on. primarily I want to sell the tinny and trailer so if you dont want the complete list lmk and we can make a deal. tinny hull is completely watertight, professionally welded, and then kept as clean and dry as possible by me. also the small engine means i havent given it a hard time. happily seats 5 the trailer is a bit shabby and rattley, but it tows straight and hasnt let me down. good winch, new rims with extra paint to

• Single Hull
• 14 ft
• Laser

Laser dinghy hull and Dehavilland Bobcat hull projects. The laser hull is 41287 and in average condition, has scratches and bumps but has no fittings. The Bobcat is in reasonably good shape, has some knocks and scrapes and is 12 foot long and 3 foot wide. Both would need some parts and work to be sailable. They could also be used for other purposes such as garden or dam decoration, shed ornament, fishing boat or paddleboard etc. Note dolly and trailer shown is not available for sale in this auc

• Single Hull
• 21 ft
• Edencraft

Where do I start! If you can find a better 6.0 Offshore in Australia for the price buy it! One of the solid build Corowa boats, these are the most sought after ones. Immaculate condition inside & out - as new, fitted with the best of everything, no expense spared. Open check book build. All work done is less than 2 years old. Full custom "Black out" EMC build by Evolution Marine, these guys only do a couple of these builds a year, there not cheap but quality is second to none, you get what yo

• Single Hull
• 23 ft
• Huntsman

23 Foot Huntsman mostly complete ,Has had a 225 hp mercruiser ,mostly there. On tander trailer with some rust.Due to health issues this project is beyo nd me

Fiberglass project boat, has steering, spare tyre all good. Trailer and boat not registered.

• Multi Hull
• 14 ft
• Catamaran

Hobie Cat (14 ft) This great little Hobie Cat is in need of some attention , it is all there to go. Comes with mast , sail and boom it has all the steering gear and comes with its own on road trailer with sail box. This is an ideal project for someone who has the time to apply .

• Single Hull
• 16 ft
• Caribbean

Project boat needs a new floor and transom. im selling it cause I don't have the time to put into it.

• Single Hull
• 16 ft
• Quintrex

This boat is amazing for the bay or freshwater can be used for fishing or scuba diving, has rear ladder and side rails. Spent over $20K on upgrades and refurb. Quintrex aluminium boat 1980s not sure the exact build date as its not on the compliance plate. Boat has been fully rebuilt inside and out, was my covid project started in 2020 and completed in 2022, stripped back to bare metal full paint job including trailer (have receipts), new dash with switchboard, new windscreen, , live bait tank

• Single Hull
• 16 ft
• Other

Half Cab Boat Kertsea III Pick Up Corinella, Vic. Deceased Estate 90 Percent completed project Price Negotiable, only sensible offers. Unfortunately my father passed away before being able to complete his dream Boat and trailer registered till mid 2024 V Hull with fully enclosed cabin 16.5 ft.& 5.7ft in width 90 Hp V4 Evinrude 2 stroke outboard running Dyna Foyle stainless steel propeller 1X Solar panel approx 200W, Solar charger, Battery and distro 12v outlets throug out Mains inlet and safety

• Single Hull
• 18 ft
• Huntsman

I have for sale a project huntsman fishing boat half cab project boat Transom is solid Stringers are in good condition Needs new flooring done and wave breaker Needs wheel bearings done on the trailer Brought this boat 2 years ago but have run out of time to finish the project I have started Have brought and installed a 150L underfloor fuel tank Has been painted in marine white and grey paint on the outside