1 Results: kobelco excavator in Brisbane North East, QLD

NEW ROLLER TO SUIT NEW HOLLAND, FIAT, KOBELCO EXCAVATORS $233.38 Bulimba, QLD ALL OFFERS CONSIDERED - We wont be beaten on price !!! EQST-SI1000G See SPECIFICATIONS TAB for compatible machine models. CROSS REFERENCE (Original codes): BERCO CR5109 BERCO CR5572 BERCO CR6676 CATERPILLAR 117-5045 CATERPILLAR 163-4143 CATERPILLAR 1R8669 CATERPILLAR 209-3386 CATERPILLAR 286-9823 CATERPILLAR 348-1867 CATERPILLAR 8E5034 CATERPILLAR 964289 CATERPILLAR 965893 CATERPILLAR 991109 CATERPILLAR 993597 INGE

• 280 hr

2022 Komatsu pc18 excavator 280 hours Suit new buyer More photos coming on Tuesday 7th Full bucket set with ripper Extras: Second mud bucket tilting (pictured). Auger drive, digger brand, with two augers. Suit buyer looking for japanese made excavator Kubota yanmar Kobelco

The price includes GST. New Agrotk EXRC-54 Excavator Rotary Brush Cutter Slasher Mower suit 3-10 Ton machine. Great for mowing steep banks, around ponds & dams, cutting back brush on roadways and trails, reaching over fences and guardrails etc. Direct drive one-way check valve hydraulic motor. Skid rails run along the entire mower deck sides. Hydraulic hoses and 1/2" flat faced Quick Connect Couplers included (see Pic #10). Cutting Width: 54" (1372mm). Cutting Height: 1.6" (41mm). Blades: 2.

Price includes GST. New Jea Wen JW450 Excavator Hydraulic Hammer Rock Breaker to suit: 1-3 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with a 43.6mm Point Moil, Hoses, Manual, Toolbox with various Spanners etc. and a Nitrogen Gas Bottle & Pressure Gauge Kit for regassing the breaker. The Hitch Headstock currently has 30mm Pins fitted into collar bosses that fit into 45mm diameter Pin holes, so pins up to 45mm diame

Price includes GST. New Jea Wen JW530 Excavator Hydraulic Hammer Rock Breaker to suit: 2-5 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with a 52mm Point Moil, Hoses, Manual, Toolbox with various Spanners etc. and a Nitrogen Gas Bottle & Pressure Gauge Kit for regassing the breaker. Required Oil Flow: 25-45 L/min. Current Headstock Setup: * The Hitch Headstock currently has 40mm Pins fitted into collar bosses that

Price includes GST. Used Excavator Hydraulic Hammer Rock Breaker to suit: 4-10 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 80mm Point Moil and hoses as seen in pics. Breaker Dimensions: 1150mm(L) x 395mm(W) x 580mm(H), Weight: 428kgs. Optional Removable Headstock: There is also a matching Bolt-On Headstock if the pin setup will work for you for $350 (see Pic #10). It has 45mm Pin hole Diameter, 235mm Center t

Price includes GST. New Zhenshan 680 Excavator Hydraulic Hammer Rock Breaker to suit: 4-8 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 2x 67mm Point Moils, Hoses, Nitrogen Gas Bottle. The Breaker is New & Unused, but has a few small chips and scratches in the paint. The Hitch Headstock currently has 45mm Pins fitted into collar bosses that fit into 65mm diameter Pin holes, so pins up to 65mm diameter can be fi

Price includes GST. Used Excavator Hydraulic Hammer Rock Breaker to suit: 5-10 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 63mm Point Moil, Hoses with Quick Release Couplings. Breaker Dimensions (with moil): 1620mm(L) x 380mm(W) x 445mm(H) (620mm High with Hoses), Weight: 340kgs. Current (removable) Headstock Dimensions: 50mm Pin Diameter, 305mm Pin Center to Pin Center (CtoC), 204mm Between the inside Ear Bo

Price includes GST. Used Toku TNB-6E Excavator Hydraulic Hammer Rock Breaker to suit: 5-11 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Striking Rate: 550~1000 BPM (Blows/Min). Hydraulic Flow: 45-80 L/min. Operating Pressure: 10-16 MPa (*****2321 PSI). Tool (Moil) Diameter: 95mm. Gas Pressure: 0.8 MPa (116 PSI). Made in Japan by Toku: https://www.toku-net.co.jp/en Please Note! There are 2 bolts missing on the Headstock (

Price includes GST. New Ironfist I-10 Excavator Hydraulic Silenced Hammer Rock Breaker to suit: 9-20 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. The Breaker is New & Unused. Comes with 2x 97mm Point Moils and a Nitrogen refilling Bottle. Required Oil Flow: 80-110 L/min. Required Pressure: 150-170 bar (2175 to 2465 psi). Breaker Dimensions (without moil, as seen in pics): 1740mm(L) x 480mm(W) x 550mm(H), Weight: 942kgs.