16 Results: bobcat hydraulic in Brisbane Region, QLD

The price includes GST. New Agrotk EXRC-54 Excavator Rotary Brush Cutter Slasher Mower suit 3-10 Ton machine. Great for mowing steep banks, around ponds & dams, cutting back brush on roadways and trails, reaching over fences and guardrails etc. Direct drive one-way check valve hydraulic motor. Skid rails run along the entire mower deck sides. Hydraulic hoses and 1/2" flat faced Quick Connect Couplers included (see Pic #10). Cutting Width: 54" (1372mm). Cutting Height: 1.6" (41mm). Blades: 2.

Price includes GST. New Jea Wen JW450 Excavator Hydraulic Hammer Rock Breaker to suit: 1-3 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with a 43.6mm Point Moil, Hoses, Manual, Toolbox with various Spanners etc. and a Nitrogen Gas Bottle & Pressure Gauge Kit for regassing the breaker. The Hitch Headstock currently has 30mm Pins fitted into collar bosses that fit into 45mm diameter Pin holes, so pins up to 45mm diame

Price includes GST. New Vickey Industrial / Handy Attachments SHB680 Bobcat/Skid Steer/Positrack Hydraulic Rock Breaker Hammer. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with two 67mm Point Moils, Hoses, solid steel Stand (47kg) for storing the breaker in a vertical position, and a Nitrogen Gas Bottle for regassing the breaker. Hoses fitted with Quick Release Couplings (see pic# 9). Manufacturer's Website: https://www.vicke

Price includes GST. Used Excavator Hydraulic Hammer Rock Breaker to suit: 4-10 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 80mm Point Moil and hoses as seen in pics. Breaker Dimensions: 1150mm(L) x 395mm(W) x 580mm(H), Weight: 428kgs. Optional Removable Headstock: There is also a matching Bolt-On Headstock if the pin setup will work for you for $350 (see Pic #10). It has 45mm Pin hole Diameter, 235mm Center t

Price includes GST. New Zhenshan 680 Excavator Hydraulic Hammer Rock Breaker to suit: 4-8 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 2x 67mm Point Moils, Hoses, Nitrogen Gas Bottle. The Breaker is New & Unused, but has a few small chips and scratches in the paint. The Hitch Headstock currently has 45mm Pins fitted into collar bosses that fit into 65mm diameter Pin holes, so pins up to 65mm diameter can be fi

Price includes GST. Used Excavator Hydraulic Hammer Rock Breaker to suit: 5-10 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 63mm Point Moil, Hoses with Quick Release Couplings. Breaker Dimensions (with moil): 1620mm(L) x 380mm(W) x 445mm(H) (620mm High with Hoses), Weight: 340kgs. Current (removable) Headstock Dimensions: 50mm Pin Diameter, 305mm Pin Center to Pin Center (CtoC), 204mm Between the inside Ear Bo

Price includes GST. Used Toku TNB-6E Excavator Hydraulic Hammer Rock Breaker to suit: 5-11 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Striking Rate: 550~1000 BPM (Blows/Min). Hydraulic Flow: 45-80 L/min. Operating Pressure: 10-16 MPa (*****2321 PSI). Tool (Moil) Diameter: 95mm. Gas Pressure: 0.8 MPa (116 PSI). Made in Japan by Toku: https://www.toku-net.co.jp/en Please Note! There are 2 bolts missing on the Headstock (

SOLD_Digga HyDrive trencher 1200mm for skid steers – excellent condition (teeth and sprockets hardly worn) – combination chain (tungsten rock and earth teeth) – 150mm cutting width – max cutting depth 1100mm – sliding frame system – twin spoilage augers – new hydraulic hoses – new flat-face couplers (replaced with poppet couplers on request). NOTE: Surface rust on chain only. Specifications Hydraulic flow: 50-80lpm Max pressure (do not exceed): 240 bar (3481psi) @ 60lpm Max continuous power: 3

NOTE: Bolt-on reversible front cutting edge currently being installed on this bucket. Price remains the same as advertised. Norm Engineering tilting (crossflow) 4in1 bucket for skid steers – 2050mm wide – near new condition (used as demo bucket only) – heavy duty 20mm BisAlloy floor – plain edge – flat-face couplers – 0.44m3 capacity – weight 607kg. RRP $10,950 inc GST This attachment has a Universal hitch (1135mm wide) used across a range of skidsteers including Caterpillar, ASV, John Deere

High dump bucket 1730mm for skid steers – very heavy duty – excellent condition (hardly used, cutting edge corners still square, ram chromework is like new). High dump buckets are not readily available in Australia. They are however a mainstream skidsteer attachment in the USA, where numerous manufacturers contribute to a variety of high dump sizes and styles. This particular bucket came with a Bobcat skid steer imported from the USA. Their main advantage over 4in1 and standard GP buckets is

The price includes GST. New Excavator Hydraulic Thumb Grapple Grab Bucket suit 1-3 Ton machine. The bucket moves as a normal bucket attached to your hitch or directly to your dipper arm. The Thumb moves Hydraulically. Designed for Rock & Log work, but can also be used for demolition and general material handling, picking things up, moving them around and other careful placement tasks. Required Oil Flow: 25-30 L/min. Working Pressure: 100-110 bar. Headstock Dimensions: * The Pin Diameter is

The price includes GST. New Excavator Hydraulic Quick Hitch Coupling to suit 3-7 Ton machines. Fully Automatic with Dual Pin Locking (no need to leave the cab to remove / re-insert the safety pin). It has a low profile and light weight. Strong and well engineered. Made by Volvo in Ireland. It is brand New, never used. It was fitted to a new Volvo ECR58 and shipped to Australia then removed by Volvo when their customer wanted a tilting hitch fitted. It then sat in a Volvo warehouse for 5 year

The price includes GST. New Excavator Mechanical Quick Hitch Coupler to suit 5-10 Ton machines. Want a quick hitch but don't have any spare auxiliary hydraulic lines for a hydraulic hitch? This hitch is identical to a hydraulic hitch setup except you lever the pin clasp open and closed with a rod that compresses the spring. There is no need to pull either of the 50mm pins out of your buckets etc. and try to line up the linkages. Instead you simply sit the hitch into your bucket's front pin j

The price includes GST. New Geith Excavator Hydraulic Coupler Quick Hitch to suit 5-10 Ton machines. Designed for Bobcat zx125, Ingersoll-Rand ZX125, Kato 180, Kobelco 70SR / SK 60 / SK 70SR / SK 70SR-1E / SK 75UR / SK 80MSR, Komatsu WB146-5,PS-5, Takeuchi TB 70 / TB 70FR / TB 80FR / TB 175 etc. but will fit other machines (see below list of machines we have found so far). Condition is New but it was sitting for some time and started getting surface rust. We cleaned it and gave a fresh coat o

The price includes GST. New Heavy Duty Excavator Hydraulic Grapple Grab suit 5-10 Ton machine. Well made, thick & sturdy. Designed for Rock, Log & demolition work but can also be used for general material handling, picking things up, moving them around and other careful placement tasks. Condition is New but there are some paint scratches on the sides. Opening Width: 700mm. Headstock configuration: 50mm Pin Diameter, 305mm Pin Center to Pin Center (CtoC), 262mm Between the inside Ear Bosses

The price includes GST. New Excavator Hydraulic Vibratory Plate Compactor suit 5-10 Ton machine. The Hitch Headstock currently has 50mm Pins fitted into collar bosses that fit into 65mm diameter Pin holes (see pic #10), so pins up to 65mm diameter can be fitted without needing to bore out the holes in the headstock. The Pin Center to Pin Center is 305mm. The distance between the collar bosses is 160mm. Removing the collar bosses, the distance between the headstock bosses is 210mm, but these w