Tractor Blade
Back Grader blade for small Tractor. 153cm wide, 3pt Linkage, Heavy duty, used once as new. Pick up only.
Include items that ship Australia wide
$525Negotiable
Coffs Harbour, NSW
14/03/2024
TRACTOR = MASSEY FERGUSON 3090 4WD BLADE/STICK RAKE - FUNCTIONAL ORDER
- 11700 hr
TRACTOR DOES NOT COME WITH VERGE MOWER IN PHOTOS. Comes with operator manual, some spares. Motor starts readily and does not blow excessive smoke, no oil use. Three sets of rear remotes. Hydraulics all operate as they should. Not spruced up for sale. Photos are of tractor as used. Fine cracking in central rear LHS wheel hub. ( Wheel hub is recommended to be welded. RHS already done.) Massey Ferguson 3090 I have owned for the last 20 or so years. I acquired ex a contractor/retailer who did ab
$27,500
Coffs Harbour, NSW
13/02/2024
Tractor slashing
Tractor work offered on an hourly basis. 50hp Kubota tractor with front end loader ( grapple bucket/4in1/forks) 85$ per hour minimum 3 hours float charge if located further then 25km Regularly service grafton-macksville-dorrigo - grass slashing - stick racking and burn pile building - property clean up - spraying - light land clearing - road and farm track building Other machinery available Komatsu small dozer 6way blade Kobelco 5ton excavator Tipper truck
Coffs Harbour, NSW
06/11/2023
We found 10 additional ads in surrounding suburbs.
Challenge 3pl grader blade
G30 tractor grader blade like new to suit 120-160hp tractor Suits 3 remotes Like new only done app 6 hrs work 3 mtrs wide Unfortunately too big for our operation
$14,900
Guyra, NSW
18/10/2023
*Not Running - John Deere L100 with new 42” Cutting Deck
• John Deere L100 series ride-on mower not running. Needs new compression release spring on camshaft, and battery ( parts cost $60 + $140 ) • 42 inch mowing cutter deck to fit interchange on John Deer Ride on Lawnmower. • Interchangeable deck with other 42” models - this deck is not original to this tractor • Can dismantle for freight or you can just take whole mower for extra parts. • Cutting deck is near new including all belts, blades, spindles, springs & mounts. • Located Newrybar near Ball
$1,000
Newrybar, NSW
22/04/2024
TRACTOR SLASHIER BLADE SET BRAND NEW HOWARD NUGGET 1200
SLASHER BLADES HOWARD NUGGET 1200 BRAND NEW Brand new slasher blades x 2, including bolts to suit a Howard Nugget slasher with a 1200mm cut. These blades are unused and still in part of the packaging. The kit includes bolts required to fit them up Unable to post. Pickup at Nimbin or can deliver to Lismore by special arrangements.
$40
Nimbin, NSW
09/03/2024
New 2024 TITAN / IronCraft 15FT Folding Tractor Slasher FW15 [1000 PTO]
New 2024 Model Titan / IronCraft FW-15 Flex Wing 15FT Slasher [1000 PTO] Wholesale Price ---- $39,800 Plus GST ( Plus Transport cost to buyers location ) Australia's No 01 Selling Flex Wing Slasher Upgraded to 4 x 29" Heavy Duty Aircraft Tyre's Cutter Suspension 2 x Heavy Duty Springs Centre tail Introductory price for floor stock only (Work Shop Pre delivered and work ready) Pre delivered and work ready / Pick up at Applethorpe or delivery can be arranged Australia wide. USA Manufactu
$39,800
Applethorpe, QLD
Dealer new
9 hours agoNew 2024 Model Titan / IronCraft 12 foot Flexwing Tractor Slasher FW12 [540 PTO]
New 2024 Model Titan / IronCraft FW12 Flex Wing 12FT Slasher [540 PTO] Wholesale Price ---- $29,850 Plus GST ( Plus Transport cost to buyers location ) Australia's No 01 Selling Flex Wing Slasher Upgraded to 4x Heavy Duty Aircraft Tyre's Cutter Suspension 2 x Heavy Duty Springs Center tail Introductory price for floor stock only ( Work Shop Pre delivered and work ready ) Pre delivered and work ready / Pick up at Applethorpe or delivery can be arranged Australia wide. USA Manufactured /
$29,850
Applethorpe, QLD
Dealer new
9 hours agoNew 2024 Model Titan / IronCraft 15 foot Folding Tractor Slasher FW15 [540 PTO]
New 2024 Model Titan / IronCraft FW-15 Flex Wing Slasher [540 PTO] Wholesale Price ---- $39,800 Plus GST ( Plus Transport cost to buyers location ) Australia's No 01 Selling Flex Wing Slasher Upgraded to 4 x 29" Heavy Duty Aircraft Tyre's Cutter Suspension 2 x Heavy Duty Springs Centre tail Introductory price for floor stock only (Work Shop Pre delivered and work ready) Pre delivered and work ready / Pick up at Applethorpe or delivery can be arranged Australia wide. USA Manufactured /
$39,800
Applethorpe, QLD
Dealer new
10 hours ago6ft grader blade very little use Australian made
Good straight blade operates as it should suit 25-60hp tractor located at Mullumbimby can organise freight price inc Gst
$695
Mullumbimby, NSW
Dealer used
6 hours agoJohn Deere 2100 tractor 4wd with bucket and blade
Good tractor starts and runs well 60hp 4wd front end loader with bucket and front blade can organise freight price inc Gst hours are unknown and tractor is located in Mullumbimby
$12,950
Mullumbimby, NSW
Dealer used
24/04/2024Kubota 72 inch Blade (set of 3) blades
Set of 3 Blades for Kubota 72" decks to suit the following, RCK72-28Z(P) RCK72-27B, 30B RC72-38 RC72-F30 RCK72P-331Z RCK72P-F36 ZD28 ZD29 2560 3060 3560 Stepped and Fluted, Right hand cut 622mm long, 65mm wide, 7mm thick, 29mm hole, 14mm step K5677-34340 70000-25002 76553-34330 76550-34350 76539-34372 Price is for 1 set, which includes 3 blades Message me for a price on freight Murwillumbah Tractor Wreckers https://www.facebook.com/Murwillumbah-Tractor-Wreckers-1035903
$121
South Murwillumbah, NSW
22/05/2022
Kanga Multi Clamp 8ft Grader Blade
The blade has a locking wedge design, allowing the operator to adjust the blade to the desired angle, tilt and offset. The blade can be used to maintain tracks, firebreaks and drains or perform clearing, scraping or grading. Only requires tractor with 40 to 70HP. The blade can be reversed to clear scrub and debris. The blade works well and is no longer required.
$2,500Negotiable
Warwick, QLD
08/11/2023
Save search and get notified when new items are posted