18 Results: New & Used in cpu fan in Rochedale South 4123, QLD

GIGABYTE Superb 550 450W (GE-P450N-C2) PC ATX Power Supply. Fully tested and in good working condition - plus bonus splitter for video card power and an OCZ sticker on PSU, WOW!!! Would suit an older gaming rig build or modern average desktop build. Specs per below, otherwise check my other listings for more great retro gear, and if you're interested in anything else, feel free to ping me and I'd be happy to discount multiple/bulk buys. Please contact me by phone or text message for the faste

Two AMD Socket A CPU's circa 2003 with original heatsinks/fans (one has enough copper in it you could probably retire if sold for scrap...). Both working when pulled many years ago, but no working boards to test them in (read on). Both fans working fine. Two not working motherboards included - Jetway Polaris 400 (powers on but gets motherboard fault beep code - per pics, caps need replacing), and a Gigabyte GA-7VM400AM (on which some ning nong (it wasn't me) shorted the ATX power connection, pe

Three Intel Socket LGA775 CPU's (from 07, 08, 09) with two heatsinks and fans (1 Celeron & 1 Quad spec coolers). None tested (don't have a board) but all CPU's were working when pulled 10 odd years ago. So going cheap - great for a retro build or as spare parts. Specs on each chip below. INTEL '05 Q6600 INTEL CORE 2 QUAD 2.40GHZ/8M/1066/05A L802A614 Link: https://ark.intel.com/content/www/us/en/ark/products/29765/intel-core2-quad-processor-q6600-8m-cache-2-40-ghz-1066-mhz-fsb.html INTEL '06 Q

Get your retro "naughties" computing on with this complete system (minus case, power supply, drives) from circa 2004/5. Excellent condition components, with very little use (was used a year or two then basically shelved), all fully tested, safely stored in anti-static bags and ready to go. NOTE: This kit has one small problem... the CPU fan can be a bit sticky (it might need a flick with your finger to get started) and until it gets spinning, the board won't boot. So the fans bearings need som

Get your retro "naughties" computing on with this complete system (minus case, power supply, drives) from circa 2008/9. Excellent condition components, with very little use (was used lightly a year or two then basically shelved), all fully tested, safely stored in anti-static bags and ready to go. CPU: All straight pins and tested as working. CPU as originally installed with factory heatsink/fan (I recommend upgrading paste for longer term/heavier use). AMD Athlon II X4 620 Processor 4 Cores,

Get your retro "naughties" computing on with this complete system (minus case, power supply, drives) from circa 2009/10. Excellent condition components, with very little use (was used lightly a year or two then basically shelved), all fully tested, safely stored in anti-static bags and ready to go. CPU: All straight pins and tested as working. Installed CPU using factory heatsink/fan with fresh, Arctic Silver thermal paste (I recommend upgrading paste for longer term/heavier use). AMD Phenom I

Get your retro "naughties" computing on with this complete system (minus case, drives) from circa 2006/7. Excellent condition components, with very little use (was used a year or two then basically shelved), all fully tested, safely stored in anti-static bags and ready to go. CPU: Both have all straight pins and tested as working. Installed CPU using factory heatsink/fan with fresh, Arctic Silver thermal paste. AMD Athlon 64 X2 Dual Core Processor 5000 AMD Athlon 64 X2 (Spare CPU in protectiv

If you see the ad, it is available. Asking if its available will be ignored. Pick up Calamvale 4116 or post for $10 postage. Price is fixed. Some discount if you buy more than one pack. Motherboard: Brand new B250C motherboard with 12 PCIE slots (USB 3.0 type to connect PCIE risers) CPU: Intel 6100 3.7GHz with new heatsink and fan RAM: 4GB DDR4 Comes with CMOS POST Speaker and power on switch cable. PCIE risers are available.

Zalman CNPS7700-ALCU cpu cooler. High performance with 120mm fan and fan speed control switch box. Supports all socket 775 processors. Very good working order, complete with mounting plate and screws. Contact me by phone or Gumtree message. Ad is deleted once sold, otherwise item is available for sale.

Brand new in box. Supports Intel socket 775 and AMD socket AM2/AM3, 754, 939. Comes with a single 92mm PWM fan with option of using double fans with anti-vibration rubber fan mounts. Light material fin design. Push-pin/Clip easy to install, reliable and excellent performing. Please contact me by calling or Gumtree message only. Ad is deleted once sold, if it is visible online item is available for sale.

Assorted PC Parts almost everything has been Tested & Working (Monitor, CPU, GPU, Ram, HDD, Case) Slightly negotiable so make an offer or ask for my price If it's still listed - it's still available I can confirm most items are 100% working however a couple of items may require further testing (I will tell you what is and isn't definitely working) What's Included: Monitors: 1x Dell monitor 1x Acer monitor - SOLD 1x Samsung monitor (photos not shown here, ask for them) - SOLD 3x Pc cases:

If the ad is up it is available. Corsair Hydro Series H90 140mm Liquid CPU Cooler Excellent working condition. The Corsair Hydro Series H90 Liquid CPU Cooler provides quiet, efficient, high-performance CPU cooling for cases which have a 140mm fan mount near the CPU. Compatible with Intel 1150, 1155, 1156, 1366, 2011 and 2011-3 as well as AMD Sockets FM1, AM4, AM3, AM3 , AM2 and AM2 .

Hi There I have this Intel 1366 Cpu fan , is a I7 Copper head Fan $15.00 , the other a aluminum standard fan $10.00 (SOLD ) Both work Don't have a board anymore but a few I7 Processor left if interested.

Have this Collection if CPU Fans some have bases some use the screw in base that sticks under motherboards downsizing so no longer need these , one is for the 478 Intel socket but no base , all offers Considered The Copper One is Sold .

Forgot the brand , but had this Fan running on my old 1366 gaming board , the board developed an Issue and wouldn't start any more so scrapped and still have this left bit dusty but otherwise ok , change a fan a while ago as one died so still a good cooling Unit . Suitable for 115X, 1366 & 775 so if you like maxing out the cpu this will suite you .

GOOD GAMING CPU. FOR FORTNITE, MINECRAFT, PUGB

Selling as Ive upgraded my pc and selling off parts individually. Selling the case and cpu cooler in together, includes bolts and brackets and fans for the build. All in working order.

Noctua NH-D15 CPU Fan with Heat Sink. Condition is good and cooler and fan work perfectly. It includes all parts (AMD and Intel mount versions) and thermal paste as shown in the photos. Full specs are here: Specifications can be found here: https://noctua.at/en/nh-d15