Top2012 New Holland L225 Highflow Skid Steer
- 4209 hr
No Attachments Supplied Year Model: 2012 Model: L225 4209.8 Hours Needs a good service. Been cleaning up paddocks as of late. Operates Fine, issues with the park brake.
Wagga Wagga RegionClear all
$25,000Negotiable
Albury, NSW
7 hours ago
TopFence Post Driver
- 0 hr
Smart Driver Brand NEW s a serious productivity tool built on hydraulic concrete breaker technology, enabling you to install fence posts even in hard and rocky ground. We have seen experienced crews run at rates up to 2 posts per minute in favorable conditions. Attaching one of these post drivers to a skid loader can be done in less than a minute. Choosing a Smart DriverPost Driver will give you ease-of-use, longevity, and optimum efficiency. Energy Class: 1150 ft-lb. Weight of Post Driver
$8,000 Excl. Gov. Charges
Wagga Wagga Region, NSW
Dealer new
22/04/20242012 New Holland L225 Highflow Skid Steer
- 4209 hr
No Attachments Supplied Year Model: 2012 Model: L225 4209.8 Hours Needs a good service. Been cleaning up paddocks as of late. Operates Fine, issues with the park brake.
$25,000Negotiable
Albury, NSW
7 hours ago
2007 Komatsu Excavator PC270LC-8 with attachments
27 Tonne Komatsu Excavator - Air Conditioned Cabin - UHF Radio - Fire Extinguishers - Emergency Stops - Battery Isolator - Hydraulic Quick Hitch - Rotating Beacon - Mud Bucket - GP Bucket - Trench Bucket - Ripper Tyne S/N: 25050
$90,000
Albury, NSW
26/04/2024
Urgent
2022 Sany SY80U Excavator with attachments
- 483 hr
Excellent all-purpose excavator, suited for various job conditions. It offers smooth, responsive hydraulics and a spacious, modern cab for enhanced operator comfort. Hours: 483 Included attachments: - 450mm GP BKT - 600mm GP BKT - 900mm GP BKT - 1500mm Mud BKT VIN: 0F5110080N5L10080CB
$90,000
Albury, NSW
26/04/2024
Fence Post Driver
- 0 hr
Smart Driver Brand NEW s a serious productivity tool built on hydraulic concrete breaker technology, enabling you to install fence posts even in hard and rocky ground. We have seen experienced crews run at rates up to 2 posts per minute in favorable conditions. Attaching one of these post drivers to a skid loader can be done in less than a minute. Choosing a Smart DriverPost Driver will give you ease-of-use, longevity, and optimum efficiency. Energy Class: 1150 ft-lb. Weight of Post Driver
$8,000 Excl. Gov. Charges
Wagga Wagga Region, NSW
Dealer new
22/04/2024Kubota parts
Wrecking Kubota b7100 with mower deck
$1,234Negotiable
North Wagga Wagga, NSW
20/04/2024
Trimble Receivers
2 x Fully unlocked Trimble MS995 receivers, latest software, 2 years old, terrific condition. Selling as they’re surplus to needs. Priced per receiver plus GST
$16,500
Griffith, NSW
14/04/2024
Bobcat 643 and M610
Bobcat 643 $5000 Has right hand drive issue but everything else works Comes with 4 in 1 bucket Bobcat M610 $4000 Datsun 1275 engine Normal bucket
$5,000
North Albury, NSW
11/04/2024
Foton 4wd 60 HP with loader
- 14 hr
Foton Lovol 60 and 45 Hp tractors for sale Full spec tractors with the following: FEL with euro hitch, Italian hydraulics, 4 in 1 bucket & pallet forks 12 speed transmission 4 gears with 3 ranges shuttle shift forward/reverse diff locks dual hydraulics engine driven air compressor with rear outlets full road legal lights and electrical ROPS with canopy Cat 2 3 PL with two load adjustments Front and rear drawbars 4 litre mechanical injection diesel, no emissions, ad blue or sensor
$29,500 Excl. Gov. Charges
Narrandera, NSW
Dealer used
03/10/2023CAT 992G High Lift Kit
Great Condition CAT 992G Hight Lift Kit Includes Boom, Cylinder, Bucket Links. Located NSW. $$ Negotiable. East Coast Delivery Available. Can be sold separate.
$70,000Negotiable
Wagga Wagga, NSW
01/02/2023
We found 24 additional ads in surrounding suburbs.
Click here to see all resultsJohn Berends. Lifting jib
John Berends Lifting jib Suitable for tractor
$350
Yarroweyah, VIC
13/04/2024
Jackhammer mount for 6t hitachi excavator
Hitachi ZX60USB mounting bracket for hydraulic jackhammer. Good condition. Only used a handful of times for short periods Size / measurements: 235mm between centre of pins Plate = 380mm length x 310mm width
$500
West Wodonga, VIC
18/07/2023
Lehmann Scraper
Lehmann 846 Scraper. 6 yard capacity. Refurbished condition. Suit new buyer
$123
Wodonga, VIC
07/04/2024
Single Phase PTO Generator
- 110 hr
Mecc alte 26 KVA Single Phase Pto generator. 4 x 16 amp outlets Can be hard wired Can be changed to 3 Phase. Exellent Condition $3700 plus GST ONO.
$3,700Negotiable
Forbes Area, NSW
12/04/2024
Trencher Sprockets
Brand new Trencher sprockets 3" pitch, suite Ditch Wich, Perry, Austoff and other makes of trenchers $120 each. New 2" pitch drive sprocket. $110.
$120
Wangaratta, VIC
24/01/2021
1.7t Kubota Excavator for sale
- 230 hr
U17 Kubota Excavtaor Only done 230hr Used - like new Fully serviced What’s included Excavator: •300mm bucket •450mm bucket •900mm mud bucket •450mm auger •600mm auger •PDX 2 drive head •Halo auger alignment system •GPS tracker with remote immobilisation •Digger lid canvas cover Trailer: •10x5 tandem trailer •Breakaway system •Elecbrakes electric brake controller
$50,000Negotiable
Shepparton, VIC
15 hours ago
XCMG xe60da excavator
- 15 hr
XCMG XE60DA 2022 model with only 15hrs. Yanmar engine , quality hydraulics and hoses, robust and easy to operate. Call for details. Suit new buyer. $38,500inc gst
$38,500
Yackandandah, VIC
25/04/2024
Caterpillar 306 excavator 2021
- 25 hr
Cat 306 with only 25 Hours. It was bought to do a small job and it has no further use now. Very fast powerful machine in excellent condition. Call for details. $66,000inc gst.
$66,000
Yackandandah, VIC
28/03/2024
Auger drive mini excavator
- 6 hr
Auger drive with 200/250 auger bit used half dozen times in very good condition
$4,000
Shepparton East, VIC
12/04/2024
Wanted: YANMAR VIO75 EXCAVATOR WANTED FOR PARTS
Looking for a wrecked or damaged VIO75 for parts
$1
Forbes, NSW
31/01/2021
Save search and get notified when new items are posted