125 Results: New & Used in Construction Vehicles in Australia

EXCAVATOR RUBBER PADS ROADLINER (CHAIN-ON) RUBBER PADS TO SUIT KOMATSU 300mm WIDE TRACKS AND 400mm WIDE TRACKS - 1 SET OF EACH AVAILABLE PLEASE NOTE - ROADLINER BOLT ON CHAIN/LINK ASSEMBLY ONLY, NOT SUITABLE FOR STEEL GROUSER PLATES WITH BOLT HOLES STOCK CLEARANCE RRP $4,000-5,000 PER SET OF 80 PADS - MAKE AN OFFER FOR 1 SET OF PADS ALL OFFERS CONSIDERED PER SET

EXCAVATOR RUBBER PADS BOLT ON RUBBER PADS TO SUIT YANMAR VIO35-6B 350mm WIDE RUBBER PADS NON-OFFSET - 2 SETS AVAILABLE PLEASE NOTE - SUITABLE FOR VIO35-6B NON-OFFSET STEEL TRACKS WITH BOLT HOLES ONLY STOCK CLEARANCE RRP $2,000 PER SET OF 80 PADS - MAKE AN OFFER FOR 1 SET OF PADS ALL OFFERS CONSIDERED PER SET

• 41 hr

This machine is immaculate and only has 41 Hours. Over $30,000 when new. Platform Height 19 ft 1 in. 5.81 m Working Height 25 ft 1 in. 7.68 m Drive Height Max. Platform Height Stowed Height 78 in. 198 cm Platform Entry Height 18 in. 46 cm Platform Size (W x L) Oversized Gull Wing Front Entry 28 x 26 in. 71 x 66 cm Overall Vehicle Length Chassis Length 53.5 in. 136 cm Extension Platform Retracted 54.5 in. 138 cm All Other Platforms 53.5 in. 136 cm Overall Vehicle Width Chassis Width 29.5 in. 75

• 190 hr

4WD 2.5 Tonne Hancha Forklift with Low Hours.side shift and fork positioning. FRM was formed in 1982 to provide specialist services to the material handling industry and have continued to grow since then. We offer the very best range of new Hino trucks and premium used trucks. Let us help provide you the trucks and equipment to help your business grow. After finance? No worries, let us help you with a no obligation truck finance quote. Of course we take trade-ins, no matter whether its a truck

1.8ton SWE18UF Excavator, Brand new, expandable track, Kubota engine, Quick hitch, with - 3 buckets, (2 trenching, 1M normal mud) - Single teeth ripper - 1m Skeleton bucket - Rake - Tilt clean bucket Package price $35,000 Inc GST (special promotion) 5y/5000hrs plant warranty. Package price valid subject to availability of stock.

Forklift Crown CG2.5 2.5 Tonne Gas Container Mast Side Shift 2011. 3 stage container mast. Fork positioning. 9564 hours.

• 16 hp

2022 UHI New Model Released XU20, Kubota Engine 11.8kw! *Custom Made By Top Brand Manufacturer! *Rexroth Main pump, Eaton Swing & Travel Motor. *Comply Australian TOPS&ROPS&OPG Standard *Free 300mm, 450mm, 900mm Mud Bucket, Ripper and Quick Hitch *4 Years 4000 hrs Full Warranty (Condition apply) Specification: Operating weight: 1890kg Overall dimension(L*W*H): 3560 *990/1240*2350mm Engine:Kubota D902 11.8kw/2300/r/min Max. Flow 64.4 L/min Max Bucket digging force: 16KN Max Arm digging force

• 215 hp
• 0 hr
• 6x4

WCM215 Grader is now available in stock. Top quality, easy drive and easy service, Designed and manufactured for earthmoving, road repair, commercial purpose. 2Y/2000hrs full warranty. Price is only $189,900 Inc GST - Operation weight: 19ton, with Front blade, Rear 5 shank Ripper - 6cyl genuine Cummins motor, 6CTAA8.3-C215, Tier II - Genuine ZF transmission, 6 speed forward, 3 speed reverse - Width of main board: 4270mm - Width of front blade: 2740mm - Certified Air conditioning ROPS/FOPS ca

Year: 2022 Fuel Type : Diesel Capacity : 3000 Mast Type : 2 Stage Mast Resting Mast Height : 2200mm Tyne Length 1220mm Features : Side Shift, Seat Belts, Flashing Beacon Tyres : Solid Tyres 3m Lifting Height Comes with: Tool box Operators & Maintenance manuals

• 100 hp
• 1450 hr

Tractor TS100 1450 Hours, 100HP, liquid cool engine, ROPS cabin with air conditioning, transmission is synchro, 16 speed forward and reverse shuttle. $49,000.00! Freight can be arranged anywhere! Phone Darren for details. .

• 50 hp
• 4x4

9 years in WA Market, Backed By Global Manufacturer. Free Pallet Forks and 4 in 1 Bucket With Purchase. With a top speed of 30 km/hr the Bluestar 918 has a dump height of 2900mm, 4-cylinder 50hp diesel engine and weighs in at 3600kgs. This machine is made for the weekend warrior or farmer with its off-road forklift and 1600Kg lift. This machine is so smooth and easy to operate it feels completely effortless. You’ll be lifting literal tonnes without feeling any strain on your body. Best Value

• 4500 hr
• 4x4

For Dry Hire. Cat 950M wheel loader, 2016 model low hour machine with joystick control, auto grease, 2x isolators with E stops and on board weighing system. Very tidy machine and can deliver. Long term hire only.

• 6630 hr

Tractor Kubota M8540 85HP Narrow 1600mm 4x4 WA23327 SN1515. ROPS. 3PL. Remotes. 6630 hours.

• 6985 hr

Backhoe JCB 3CX 4x4 Ex-govt 6985 hours 2009. 4 in 1 bucket. 4x4. Extender hoe. Side shift. A/C cab.

• 4x2

Toyota Forklift 3 ton Lift height- 5500 Load capacity- 915 Mast vertical- 1330 Phone Andrew-

For information contact Andrew-

• 4500 hr
• 6x4

Caterpillar 730 dump truck moxy for DRY HIRE, near new machine with tail gate, reverse camera, auto grease, E stops and battery Isolators etc. Prefer Long Term Hire. Hire equipment Available Western Equipment Hire Leon Vinci. # 21 tonne Volvo digger with 3 buckets and rock breaker. # 14 tonne Volvo Digger with GP, Trench and batter bucket. # 5.5 Tonne Cat 305.5E Excavator with 3 buckets, Clamp and Rockbreaker. # Kubota SLV75 track machine with GP bucket, skeleton bucket and fork

• 125 hp
• 1700 hr
• 4x4

2nd hand WCM XG932-II wheel loader, 2007, 10600kgs, rated load 3200kgs GP bucket, Cabin, ROPS, Air conditioning ( not working) Cabin rear glass is broken. 6cyl Diesel engine YC6108G, natural. Working perfect. Transmission 2nd gear is worn, no drive. 1st gear works normal. New transmission is in stock ($12,500+ GST) All parts are on shelf. One farm owner before. Ask for $11000 sell as it is, or $30,000 Inc GST (with new transmission replaced by WCM).

• 88 hp
• 0 hr
• 4x4

WCM928H wheel loader, new version with 4speed transmission. Operation Weight: 6100kgs, Rated load 2Ton Engine: 4cyl diesel YCD4J12T-88, 88HP@2400rpm, natural, water cooled Transmission: Power Shift 2F/2R. Max speed: 22KM/H, Electronic gear selector One joystick hydraulic operation Air conditioning cabin, with ROPS Hydraulic Quick Hitch with 1.3M3 GP Bucket, pallet fork MP3 Radio AM/FM Reverse Camera Auxiliary hydraulic pipe Bucket floating, Bucket ground levelling. Tyre: 16/70-20, tube Dry disc

• 23 hp
• 103 hr
• 4x4

'Paddock' Tracked Loader Impressive 400kg load carrying capacity Width: 830mm Well balanced for turning & traversing with loads Thick industrial quality powder coating prevents corrosion Honda GX690 Commercial 23hp 4-stroke engine Key start ignition Japanese NSK bearings throughout USA Permco hydraulic oil pump (18MPa) Parker hydraulic hoses Oil cooler and radiator upgraded for harsh Australian climate Upgraded Donaldson cyclonic air filtration system One owner used at home, done 103hrs. All

• 240 hp
• 0 hr
• 4x4

WCM FL966H Wheel loader Operation weight 22Ton, Rated load 6Ton, 4M3 GP Bucket Tier II WEICHAI WD10G240E21, 6cyl Diesel, 9.726L, 240HP @2000rpm, water cooled, Direct injection, Turbo Genuine ZF transmission 4PG210, Power shift, 4F/3R, Max. speed 38km/H Danfoss main hydraulic variable system, Piston steering pump providing the high pressure and reliability Radial tyre size: 23.5×25 Auto grease Certified ROPS/FOPS Air conditioning cabin, ice cold One joystick working operation Hydraulic quick

• 7400 hr

Forklift Toyota 42-7FG18 1.8 Tonne Gas 2006 Side Shift Container mast. Auto. 7400 hours.

• 41 hr

This machine is immaculate and only has 41 Hours. Over $30,000 when new. Platform Height 19 ft 1 in. 5.81 m Working Height 25 ft 1 in. 7.68 m Drive Height Max. Platform Height Stowed Height 78 in. 198 cm Platform Entry Height 18 in. 46 cm Platform Size (W x L) Oversized Gull Wing Front Entry 28 x 26 in. 71 x 66 cm Overall Vehicle Length Chassis Length 53.5 in. 136 cm Extension Platform Retracted 54.5 in. 138 cm All Other Platforms 53.5 in. 136 cm Overall Vehicle Width Chassis Width 29.5 in. 75

• 190 hr

4WD 2.5 Tonne Hancha Forklift with Low Hours.side shift and fork positioning. FRM was formed in 1982 to provide specialist services to the material handling industry and have continued to grow since then. We offer the very best range of new Hino trucks and premium used trucks. Let us help provide you the trucks and equipment to help your business grow. After finance? No worries, let us help you with a no obligation truck finance quote. Of course we take trade-ins, no matter whether its a truck

BARRETT FLAIL MOWER 2000 MM 3 PL HYDRAULIC SIDE SHIFT SOLID CONSTRUCTION HAMMERS COMES WITH PTO SHAFT

FLAIR MOWER 2200 MM SIDE SHIFT HEAVY DUTY HIGH FLOW.

• 16 hp
• 2 hr
• 1765 kg(GVM)

Source Machinery Based in Perth Western Australia are an official Construction Dealer for Kubota Australia U17-3 1.7 TONNE The Kubota U17-3 is the perfect excavator for tackling jobs in the tightest of spaces. Powered by Kubota 17HP engine, renowned worldwide for their outstanding reliabilIty, the U17-3 delivers on superior manoeuvrability and maximum digging performance. This compact excavator delivers the power you need, the control you want and the smoothest performance when you need

• 68 hp
• 0 hr
• 3840 kg(GVM)

Kubota's newest offering in Track Loaders is the SVL65-2CW Complete with: 68.4 HP Kubota Engine Rated operating Capacity (50% of tipping load) 1361KG Bucket breakout force 2093KG Operating weight 3840KG (including operator weight of 75KG) Twin travel speed Low ground contact pressure Electronic Travel Torque Management Tilt up cabin Hydraulic "Universal" quick coupler ISO Joystick control Retractable front window / door Auxilary service lines Work lights Source Machinery