185 Results: kobelco in Australia (Page 2 of 8)

The price includes GST. New Agrotk EXRC-54 Excavator Rotary Brush Cutter Slasher Mower suit 3-10 Ton machine. Great for mowing steep banks, around ponds & dams, cutting back brush on roadways and trails, reaching over fences and guardrails etc. Direct drive one-way check valve hydraulic motor. Skid rails run along the entire mower deck sides. Hydraulic hoses and 1/2" flat faced Quick Connect Couplers included (see Pic #10). Cutting Width: 54" (1372mm). Cutting Height: 1.6" (41mm). Blades: 2.

Price includes GST. New Jea Wen JW450 Excavator Hydraulic Hammer Rock Breaker to suit: 1-3 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with a 43.6mm Point Moil, Hoses, Manual, Toolbox with various Spanners etc. and a Nitrogen Gas Bottle & Pressure Gauge Kit for regassing the breaker. The Hitch Headstock currently has 30mm Pins fitted into collar bosses that fit into 45mm diameter Pin holes, so pins up to 45mm diame

Welcome to Ol’ Mate Equipment Visit www.olmateequipment.com.au ————————————————————— Available in stock 2023 new unused 65mm (85mm) pin 5 finger full mechanical excavator attachment universal grapple grab bucket , boom pin mounted $3000 plus GST fixed price sale , $3300 total price New unused condition , heavy duty Boom / pin fixed mount type , top mounts to excavator dipper boom and lower booms 65mm pin , bucket (dog bone link) connects to other 65mm pin , full mechanical operation no hy

• 280 hr

2022 Komatsu pc18 excavator 280 hours Suit new buyer More photos coming on Tuesday 7th Full bucket set with ripper Extras: Second mud bucket tilting (pictured). Auger drive, digger brand, with two augers. Suit buyer looking for japanese made excavator Kubota yanmar Kobelco

Price includes GST. New Jea Wen JW530 Excavator Hydraulic Hammer Rock Breaker to suit: 2-5 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with a 52mm Point Moil, Hoses, Manual, Toolbox with various Spanners etc. and a Nitrogen Gas Bottle & Pressure Gauge Kit for regassing the breaker. Required Oil Flow: 25-45 L/min. Current Headstock Setup: * The Hitch Headstock currently has 40mm Pins fitted into collar bosses that

Price includes GST. Used Excavator Hydraulic Hammer Rock Breaker to suit: 4-10 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 80mm Point Moil and hoses as seen in pics. Breaker Dimensions: 1150mm(L) x 395mm(W) x 580mm(H), Weight: 428kgs. Optional Removable Headstock: There is also a matching Bolt-On Headstock if the pin setup will work for you for $350 (see Pic #10). It has 45mm Pin hole Diameter, 235mm Center t

Price includes GST. New Zhenshan 680 Excavator Hydraulic Hammer Rock Breaker to suit: 4-8 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 2x 67mm Point Moils, Hoses, Nitrogen Gas Bottle. The Breaker is New & Unused, but has a few small chips and scratches in the paint. The Hitch Headstock currently has 45mm Pins fitted into collar bosses that fit into 65mm diameter Pin holes, so pins up to 65mm diameter can be fi

Price includes GST. Used Excavator Hydraulic Hammer Rock Breaker to suit: 5-10 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 63mm Point Moil, Hoses with Quick Release Couplings. Breaker Dimensions (with moil): 1620mm(L) x 380mm(W) x 445mm(H) (620mm High with Hoses), Weight: 340kgs. Current (removable) Headstock Dimensions: 50mm Pin Diameter, 305mm Pin Center to Pin Center (CtoC), 204mm Between the inside Ear Bo

Price includes GST. Used Toku TNB-6E Excavator Hydraulic Hammer Rock Breaker to suit: 5-11 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Striking Rate: 550~1000 BPM (Blows/Min). Hydraulic Flow: 45-80 L/min. Operating Pressure: 10-16 MPa (*****2321 PSI). Tool (Moil) Diameter: 95mm. Gas Pressure: 0.8 MPa (116 PSI). Made in Japan by Toku: https://www.toku-net.co.jp/en Please Note! There are 2 bolts missing on the Headstock (

Price includes GST. New Ironfist I-10 Excavator Hydraulic Silenced Hammer Rock Breaker to suit: 9-20 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. The Breaker is New & Unused. Comes with 2x 97mm Point Moils and a Nitrogen refilling Bottle. Required Oil Flow: 80-110 L/min. Required Pressure: 150-170 bar (2175 to 2465 psi). Breaker Dimensions (without moil, as seen in pics): 1740mm(L) x 480mm(W) x 550mm(H), Weight: 942kgs.

Selling for a mate 2013 kobalco comes with a few attachments Located in sunbury Call me on for more info

• 1035 hr

🚚 Welcome to Fleet Hire, Sales - your go-to destination for all your fleet management needs! 🚚 🔍 Our Offer: Buy for $33,000 GST. Hire: short or long-term hire options starting from just $200 / day. Finance: Financing options as low as $155 / week on a 5-year term. **FOR QUOTE ** Ph - Bianca Looking for reliable vehicles and equipment to enhance your business operations? Look no further! At Fleet Hire & Sales, we specialize in providing top-notch fleet hire and sales

• 4000 hr

Comes with 1200 mud bucket, 450, 300 and ripper. Buckets are all OZ buckets Ramps not included.

NEW EXCAVATOR SPROCKETS TO SUIT KOBELCO SK 220 on etc.......$900.00 THE PAIR..... 20 bolt,23 teeth.....Gumtree message ONLY!!!!!!!.....Sheffield.....

1.7 tonne Kobelco excavator, 1700 hours, Just been serviced, Full set of buckets and ripper, Auxiliary for auger or breaker,

The price includes GST. Used, Solid, Heavy Duty Excavator Ripper, suit 22-36 Ton machine. Great for ripping up tree roots, breaking up rock and loosening rocky ground, tarmac, paved areas etc. It is used but still has plenty of life left. Current Headstock configuration: 90mm Pin Diameter, 530mm CtoC (pin Center to pin center), 335mm BTE (Between The Ear plates). Should fit: Kato 1220SE2 / 1250SE / HD700SEV / HD900SEV. Maybe fit: Case CX240 / CX290, Kato HD1430, Kobelco SK220 / SK230 / SK2

WET HIRE & DRY HIRE 1.7T mini Excavator Operator $90 p/h GST Fully insured Bobcat S130 operator $85 p/h GST Tipper truck Digger width adjustable tracks 950mm - 1350mm Mud bucket 300 & 450 trench buckets Ripper attachment Concrete removal Levelling Tight access Trenching Box outs Material transport Landscaping preparation Detail excavation attachments available at additional cost Auger drive - post hole 300/450 Available 7 days Minimum 4 hour charges apply Free q

As new used on 1 job only, 30 or so piers. Cost $1200 selling $600 no use anymore. Was fitted to a 12 tonne kobelco