53 Results: New & Used in skid steer in Armidale Region, NSW

Wolverine Skid Steer Hydraulic Auger Drive. Unused, hydraulic powerhead/drive, 300mm auger, 450mm auger, hydraulic hoses. Several available in stock. All prices plus GST Located Glen Innes, NSW Call John for details

⭐⭐⭐Front End Loader Round-Bale Grabber / Soft Hands, 🚜 EuroHitch Type ⭐⭐⭐ CHECK YOUR FITTINGS 1ST...SEE DIAGRAM ✅ Front End Loader Round-Bale Grabber ✅ Suits a wide variety of bales especially plastic wrapped or typical twine tied ✅ 800kg max. weight ✅ 1,600mm max. opening ✅ Standard EuroHitch fitting ...CHECK YOUR FITTINGS 1ST ✅ High capacity hydraulic ram ✅ Multiple grease-points for smooth operation ✅ Rear 'legs' for proper support when un-hitched and sitting on the ground - also makes hit

For sale Digga tilting hitch Suits universal bobcat mount, to fit kubota, cat, gehl, mustang, Clark, positrack and most skid steers without modification to suit a Toyota. Hydraulic line plugs into your machine, your attachment then plugs onto the hitch. Has a 2 pin Anderson plug (can be swapped) for activating 3rd function on your 4 in 1 bucket or other attachment on the front. Was replaced with a 6 in 1 bucket so no further use. Can load this end with forklift

To Suit Skid Steer Approximate Dimensions: 380mm L x 2200mm W x 600mm H Weight: 163kgs

To Suit Skid Steer Heavy Duty Cutting Edge 1825mm W Title Angle: 22.5 degrees Operating Pressure: 16MPa Shipping Dimensions: 1930mm L x 1060mm W x 740mm H Weight: 310kgs

Unused Grapple Bucket to Suit Skid Steer to suit Skid Steer 1828mm wide Operating pressure: 17-21MPa Dual Ram Approximate Shipping dimensions: 1930mm L x 1100mm W. x 790mm H Weight: 275Kgs

To Suit Skid Steer Shipping Dimensions: 1950mm L x 1060mm W x 600mm H Weight: 190kgs

Unused Sweeper Broom Attachment To Suit Skid Steer, 1800mm Wide 0.4 Cubic meter Capacity, Required Operating Flow: 50 – 125L/m Operating Pressure: 16MPA Approximate Shipping Dimensions: 2240mm L x 1365mm W x 785mm H Approximate Weight: 520kg

Unused Tiller Attachment, To Suit Skid Steer 1850mm Wide, Operating Pressure: 16-21 MPA Scarifying Width: 1520mm, Scarifying Depth – Adjustable from 0mm to 120mm The required flow is from: 50lpm to 75lpm Approximate Shipping Dimensions: 2180mm L x 740mm W x 720mm H Approximate Weight: 360kg

To Suit Skid Steer Comes with 1 x 12 Inch Auger Required Operating Flow: 50-75 L/min Operating Pressure: 16MPa Shipping Dimensions: 1210mm L x 1110mm W x 810mm H Weight: 240Kgs

Suits Skid Steer Cutting Width: 1828mm Required Operating Flow: 75-115L/min Operating Pressure: 16MPa Shipping Dimensions: 2240mm L x 2090mm L x 620mm H Weight: 500kgs

To Suit Skid Steer Bucket Capacity: 0.35 Cubic Metres Required Operating Flow: 75 – 140L/m Operating Pressure: 16-21 MPA Shipping Dimensions: 1700mm L x 920mm W x 800mm H Weight: 525 Kgs Model Type 1

To Suit Skid Steer 1200mm Long Forks Shipping Dimensions: 1240mm L x 1430mm W x 880mm H Weight: 105kgs

Unused Grader Attachment to Suit Skid Steer Comes with: Blade Width 2.42m Rotation angle 25° Incline Angle: 24° Shipping Dimensions: 2590mm L x 2160mm W x 1365mm H Weight: 640Kgs

Unused Tiller Attachment for Skid Steer Width: 1850mm, Operating Pressure: 16-21 MPa Scarifying Width: 1520mm, Scarifying Depth: Adjustable from 0mm to 120mm Flow Requirement: 50lpm to 75lpm Approximate Shipping Dimensions: 2180mm L x 740mm W x 720mm H Approximate Weight: 360kg

Unused Rock Picking Bucket to Suit Skid Steer Comes with: Screening Width 1.93m Shipping Dimensions: 2075mm L x 1590mm W x 1090mm H Weight: 681Kgs

To Suit Skid Steer Weight: 150kgs

Model: EXEQ530 To Suit both Skid Steers and/or 2.5-4 Ton Excavators Side mount for Skid Steers / Top Mount for Excavators Can be used as both Post Driver & Rock Breaker Operating Pressure: 90-120 bar Hydraulic Flow: 25-50 Litres per minute Frequency – 600-1000 bpm Comes with: 1 x Post Driver & 2 x Chisels Cup head size: 15cm, 17cm Each unit comes with a separate heavy duty mounting plate for Skid Steers To be attached by buyer Approximate Plate Dimensions 1180mm x 480mm, 180Kgs Shipping Dimensi

Model: EXEQ750 To Suit both Skid Steers and/or 6-8 Ton Excavators Side mount for Skid Steers / Top Mount for Excavators Can be used as both Post Driver & Rock Breaker Operating Pressure: 120-170 bar, Hydraulic Flow: 50-90 Litres per minute Frequency – 400-800 bpm Comes with: 1 x Post Driver & 2 x Chisels Cup head size: 21cm, 23cm Each unit comes with a separate heavy duty mounting plate for Skid Steers To be attached by buyer Approximate Plate Dimensions 1180mm x 480mm, Weight: 375Kgs Shipping

Skid steer grapple grab bucket 2100 L 1200 H 800 W Universal pick up eg cat Kubota bobcat very large bucket, pick up round bales etc Come complete with flat face couplers Weight is 540kg Located at yatala Qld 4207 pay on pick up

SOLD_Digga HyDrive trencher 1200mm for skid steers – excellent condition (teeth and sprockets hardly worn) – combination chain (tungsten rock and earth teeth) – 150mm cutting width – max cutting depth 1100mm – sliding frame system – twin spoilage augers – new hydraulic hoses – new flat-face couplers (replaced with poppet couplers on request). NOTE: Surface rust on chain only. Specifications Hydraulic flow: 50-80lpm Max pressure (do not exceed): 240 bar (3481psi) @ 60lpm Max continuous power: 3

PENDING_Ripper attachment for skid steers – 1550mm overall width – very good condition (very little use) – rippers x5 and side stands are fully height adjustable. This attachment has a Universal hitch (1135mm wide) used across a range of skidsteers including Caterpillar, ASV, John Deere, Clark, Case, Kubota, Bobcat, Cougar, Terex, Gehl, Mustang, Komatsu, New Holland, Takeuchi, JCB and Volvo. Price includes GST (tax invoice provided). This item is available in Darra (Brisbane) Qld 4076. Local

Digga concrete mixing bowl – 110 litre total capacity (70 litre working capacity) – excellent condition (this bowl has never seen a load of concrete) – a number of these units are available for sale. Suitable for mini skid steers OR full-sized skidsteers with auger drive units that lock in an upwards angled position and have a 65mm round hub. RRP $693 inc GST Price includes GST (tax invoice supplied). Pick up from Darra (Brisbane) or assistance with arrangements for Australia-wide transport