34 Results: stihl chainsaw in Newcastle Region, NSW

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED Two (2) after market bar nuts to fit most models of Stihl chainsaws - $5 includes regular (untracked) post or $4 pickup. If unsure these will fit then please make contact 8mm x 1.25mm Thread Pitch X 19mm Hex 009, 010, 011, 012, 019T, 020, 020T, 024, 026, 028, 029, 030, 032, 034, 036, 039, 044, 046, 048, 056, 064, 066, MS170, MS171, MS181, MS190T, MS192, MS200, MS211, MS240,

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED Champion CJ7Y spark plugs fit all Husqvarna chainsaws (except 22, 23, 35, 37, G90, A100 & SM150) They will also fit selected chainsaws Echo John Deere Jonsered Partner Poulan Stihl (040 only) They also fit selected trimmers Echo Husqvarna If unsure what fits your saw or trimmer then please email me Gumtree messages are sometimes unreliable so please contact me through pacpin

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED Carlton combo consists of a laminate sprocket nose bar and a 14" Carlton N1C chain - $50 It fits the following Stihl chainsaws 009, 009 L, 010, 011, 012, 015, 017, 018, 018 C, 019, 019 T, 020, 020 SUPER, 020 T, 021, 023, 023 C, 023 L, E 10, E 14, E 140, 160, E 180, E 180 C, MS 180 C, MS 180 C-B, MS 180 C-BE, MS 181, MS 181 C, MS 181 C-BE, MS 190 T, MS 191, MS 191 T, MS 192, M

Stihl MS-250 18" (45cm) bar petrol Wood Boss chainsaw in excellent condition, serviced annually and cleaned after each use, less than 50 hours domestic use. No longer used. New chain replaced about 2 yr ago, comes with Stihl plastic hard cover and about 500ml of two stroke Stihl oil.

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED NGK brand BPMR6A spark plugs fit Stihl chainsaw (excluding models 040AV, 06, 07, 07S, 08 & 08H) Pick up available from Aberglasslyn (Maitland area NSW) Please contact me via email address as Gumtree messages are unreliable

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED A 16" JakMax 16D025K3PS solid bar with a replaceable sprocket nose and a Carlton K3L 0.325” X 0.063” X 67DL full chisel chain only $70 This combo fits the following Stihl chainsaws running 0.325" chain 024, 024 SUPER, 026, 026 C, 026P, 026 PRO, 028, 028 SUPER, 029, 030, 031, 032, 034, 034 SUPER, 036, 036P, 036 QS, 039, FARM BOSS, MS 260, MS 260 C, MS 260 PRO, MS 261, MS 261 C

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED Proꓘut solid cutter bar with replaceable sprocket nose - GAFDA2153RS. Utilises the Proꓘut DA Mount (GB "S" mount, Oregon "E031” mount). It runs a 0.404" X 0.063" X 68 drive link chain https://www.gaspares.com.au/products/GAFDA2153RS?q=GAFDA2153RS&product_code=GAFDA2153RS&per_page=&product_page=&search[category_url]= It fits Stihl S10, E30, 050, 051, 070, 07S, 075, 076, 08S, 0

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED Oil pump fits Stihl 038, MS380 & MS381 - $15, I can do a better price for two or more OEM part # 1119 640 3200 JakMax ST0431 Farmertec PJ38023A Please email me at if unsure if this will fit your saw

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED 20" Proꓘut laminate sprocket nose bar runs a 3/8" X 0.063" X 72 drive link chain. It fits Stihl saws as follows 024, 026, 028, 029, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044, 045, 046, 048, 056, 064, 066, E15, E20, E220C, FARMBOSS, MS260, MS270, MS280, MS290, MS310, MS360, MS361, MS380, MS390, MS440, MS460, MS650, MS660, MSE220C and later versions of each model Ch

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED Unbranded 3/8"LP X 6T sprockets to fit Stihl 017, 018, 019, 019T, 021, 023, 025, MS170, MS180, MS181, MS190, MS192CE, MS210, MS211, MS211C, MS230 Duro, MS250 Bearing, washer and e-clip are also provided Equivalent part numbers are GB ST305R6N Jakmax/Carlton 51570 Oregon 100962X ProKut GAF100962 OEM 1123-640-2073 Please make contact through as Gumtree m

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED 3/8" X 7T (22mm ID) rim fits the following saws when running 3/8” chain DOLMAR: 112, 113, 114, 116, 119, 120 ECHO: CS60, CS602VL, CS702VL, CS750VL, CS6700, CS6701, CS8000, CS8001 HUSQVARNA: 61, 66, 77, 160, 162, 181, 185, 222, 260, 263, 266, 268, 272, 280, 281, 285, 288, 298, 355, 357, 359, 362, 365, 371, 372, 380, 385, 394, 395, 480, 1100, 2100, 2101, 3120 JONSERED: 75, 80,

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED 18" Proꓘut laminate sprocket nose bar runs a 3/8" X 0.063" X 66 drive link chain. It fits Stihl saws as follows 024, 026, 028, 029, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044, 045, 046, 048, 056, 064, 066, E15, E20, E220C, FARMBOSS, MS260, MS270, MS280, MS290, MS310, MS360, MS361, MS380, MS390, MS440, MS460, MS650, MS660, MSE220C and later versions of each model Ch

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED 3/8"LP X 0.043" X 44DL 12" chains to fit the following Stihl Pole Saws and chainsaws MS170, MS171 HT 70, HT 73, HT 75, HT 100, HT 101, HT 130, HT 131, HT 250. Please check your saw carefully as some models were also released fitted with a 1/4" pitch chain Up to 12 chains this size can be sent by regular post for $11 Please contact by email as Gumtree messages are unreliable

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED Carlton 16-42-A360-PT (16D025A360SP) is a 16" laminate sprocket nose semi pro tip cutter bar and runs a 3/8"-063"-60DL chain It fits the following Stihl saws: 038, 038 SUPER MAGNUM, 039, 041, 042, 044, 045, 046, 048, 056, 056S, 064, 066, 066 MAGNUM, MS390, MS440, MS440 MAGNUM, MS660, MS660 MAGNUM, 029, 029 SUPER, 030, 031, 032, 034, 036/QS, 036 PRO, 038, 040, MS290, MS310, MS

8 used resharpened 12” semi chisel chainsaw chains 3/8”LP-0.050”-44DL These chains fit the following Stihl saws: 009, 009L, 010, 011, 012, 015, 017, 018, 018C, 019, 019T, 020, 020 SUPER, 020T, 021, 023, 023C, 023L, E10, E14, E140, MS170, MS171, E160, E180, E180C, MS180C, MS180C-B, MS180C-BE, MS181, MS181C, MS181C-BE, MS190T, MS191, MS191T, MS192, MS192C, MS192T, MS192TC, MS200, MS200T, MS201C, MS201T, MS210, MS210C, MS210C-BE, MS211, MS211C, MS211C-BE, MS220, MS220Q, MSE140, MSE140C, MSE140C-

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED 16" Carlton N1P 3/8"LP X 0.050" X 55 drive links, $13 each. These chains fit the following saws STIHL 009, 010, 011, 012, 015, 017, 020, 021, 023, 025, E10, E14, 019, 018, E160, E180, MST190T, MS170, MS190T, MS180, MS250, MS191, MS200, MS210, E160, E180. Please ensure your saw is not fitted with narrow kerf chain 0.043" gauge Pick up is from Maitland area NSW or up to 9 chain

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED 2 only at this price - $12 each. Archer semi chisel 3/8"LP X 0.050" X 50 drive links. These chains fit the following Stihl saws fitted with a 14" X 0.050" cutter bar 009, 009 L, 010, 011, 012, 015, 017, 018, 018 C, 019, 019 T, 020, 020 SUPER, 020 T, 021, 023, 023 C, 023 L, E 10, E 14, E 140, MS 170, MS 171, E 160, E 180, E 180 C, MS 180 C, MS 180 C-B, MS 180 C-BE, MS 181, MS

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED $3 for 6 complete joiners (preset tie strap and plain tie strap) Sizes available are 3/8"LP X 0.043" - Stihl (fits Stihl only) 0.325" X 0.050"/0.058" - ProKut 0.325" X 0.063" - ProKut 3/8" X 0.050"/0.058" - By-Link 3/8" X 0.050"/0.058" - ProKut 3/8" X 0.050"/0.058" - Archer 3/8" X 0.050/0.058" - GB EVO C1 and C2 3/8" X 0.063" - By-Link 3/8" X 0.063" - ProKut 3/8" X 0.063" - A

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED Two (2) aftermarket bar nuts to fit most models of Stihl chainsaws $4. If unsure these will fit then please make contact 8mm x 1.25mm Thread Pitch X 19mm Hex 009, 010, 011, 012, 019T, 020, 020T, 024, 026, 028, 029, 030, 032, 034, 036, 039, 044, 046, 048, 056, 064, 066, MS170, MS171, MS181, MS190T, MS192, MS200, MS211, MS240, MS270, MS290, MS310, MS311, MS340, MS341, MS360,

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED 24"/25" Proꓘut Pro Top solid bar with replaceable sprocket nose runs a 3/8" X 0.063" X 84 drive link chain. It fits Stihl saws as follows 024, 026, 028, 029, 030, 031, 032, 034, 034 SUPER, 036, 036 SUPER, 038, 038 MAGNUM, 038 SUPER MAGNUM, 039, 040, 041, 042, 044, 044M, 045, 046, 046M, 048, 056, 056S, 064, 066, 066 MAGNUM, E15, MS 290, MS 310, FARM BOSS, MS 360, MS 361, MS 38

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED 20" Proꓘut Pro Top solid bar with replaceable sprocket nose runs a 3/8" X 0.063" X 72 drive link chain. It fits Stihl saws as follows 024, 026, 028, 029, 030, 031, 032, 034, 034 SUPER, 036, 036 SUPER, 038, 038 MAGNUM, 038 SUPER MAGNUM, 039, 040, 041, 042, 044, 044M, 045, 046, 046M, 048, 056, 056S, 064, 066, 066 MAGNUM, E15, MS 290, MS 310, FARM BOSS, MS 360, MS 361, MS 380, M

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED 24"/25" (3/8" X 0.063" X 84DL) Proꓘut full & semi chisel chains to fit the following Stihl saws 034, 034 SUPER, 036, 036 Super, 038, 038 Magnum, 038 Super Magnum, 039, 041, 042, 044, 044 Magnum, 045, 046, 046 Magnum, 048, 056, 056S, 064, 066, 066 Magnum, E15, MS290, MS310, MS311, MS360, MS361, MS361C, MS361C-B, MS361C-Q, MS362, MS362C-M, MS362C-MQ, MS362C-Q, MS380, MS390, MS3

GUMTREE MESSAGING IS NOT WORKING AT TIMES. PLEASE USE EMAIL ADDRESS AS BELOW OTHERWISE YOUR MESSAGE MAY NOT BE RECEIVED 3/8" X 7T (19.5mm ID) rim fits the following saws when running 3/8” chain DOLMAR: 111, 110, 115, 109 ECHO: CS280, CS280E, CS290, CS300, CS328, CS301, CS302, CS315, CS330, CS351, CS360, 3900, CS4100, 3600, 4510, CS440, CS3700, CS400, CS4200, CS4400, CS4500, CS451, CS451VL, 550, CS500, CS452, Farma, CS510, CS600 EVL, 2600 HUSQVARNA: 36, 41, 136, 141, 246, 262, 335, JONSERED: 45

PLEASE USE EMAIL ADDRESS AS BELOW AS SOME GUMTREE MESSAGES ARE NOT GETTING THROUGH Carlton N1P-44 fits the following Stihl chainsaws 009, 009 L, 010, 011, 012, 015, 017, 018, 018 C, 019, 019 T, 020, 020 SUPER, 020 T, 021, 023, 023 C, 023 L, E 10, E 14, E 140, MS 170, MS 171, E 160, E 180, E 180 C, MS 180 C, MS 180 C-B, MS 180 C-BE, MS 181, MS 181 C, MS 181 C-BE, MS 190 T, MS 191, MS 191 T, MS 192, MS 192 C, MS 192 T, MS 192 TC, MS 200, MS 200 T, MS 201 C, MS 201 T, MS 210, MS 210 C, MS 210 C-B