57 Results: bore pumps in Perth Region, WA

I have a lot of Venture parts , no complete ones , i have the brass body and venture, They will go on your 2 pipes going down the bore They are good for bores with small amounts of water in the bore. I have a life time in the pump industry and can size the correct one for you They are ideal when a submersible pump will not work 1 will go down a 4" or 100mm bore & the other will go down a 5" or 125 mm bore Prices very from $20 to $300 Please call to see at my work shop or ask questio

Free Delivery included ✔️ All our items are in New Condition ✔️ Inspections are welcome ✔️ Please send us a message if you have any questions. Features of Bore Pump: • Stainless Steel Body • Small size submersible screw pump • High head, high efficiency, and small diameter (2 inch) of the pump • Comes with 20m cable with standard AU plug • Power: 0.37HP, 0.28KW • Max Head: 52m • Max Flow: 24l/min • Max Depth: 30m

Free Delivery included ✔️ All our items are in New Condition ✔️ Inspections are welcome ✔️ Please send us a message if you have any questions. Features of the Submersible Bore Pump: • Better flow rate than any other brand of bore water pump • 14 impellers • 110m max head • Highest quality 304-grade stainless-steel housing • 83L/min at a depth of 38 metres - 17L/min at 108 metres • Brass inlets and outlets • Can be mounted horizontally as well as vertically • Submersible down to a water depth

Model: PS22 Safe Fill: 20000 Litres Comes with Electric Pump Galvanized Grated Bunded front Compartment with drain DN50 (2”) Flanged 150# Fill Point with Full Bore Ball Valve Non Return Valve Male Camlock Fitting Dust Cap Mechanical Overfill Protection Valve 12V Overfill Alarm DN50 (2”) Flanged 150# Suction Point with Anti Syphon Foot Valve Assembly Fork Pockets TARE: 4700Kgs Dimensions: 4950mm Long x 2200mm Wide x 2520mm High This tank is constructed to AS1692-2006 & AS1940-2017 To be installe

Bore pump orange pump 2hp 3phs with about 30 mtrs of lead 2 inch out let

CentriPro Submersible Pump with all the kit ready to be re-installed. I had to reluctantly remove bore due to house building. It was new and pumping up perfectly from ~29m below. Comes with everything ready to be easily reused. Specifications: - Stainless Steel Submersible Pump and motor - 17 stages - 2 HP / 1.5 kW motor - 240 V - Control box, isolation switch, power cable - DN40 discharge hose (~29m) + couplings + isolation gate valve (DN40 - brass) - Extraction cable

C&H Industrial Gear Motor, Hi Torque output and robust frame. 22.29:1 gear ratio, fitted with Single Phase Induction Motor. Was used for bore pump but can be used for any application where low revs, hi torque are required.

I have a lot of Gal Mal pipe fittings , These have BSP threads , they will screw on to any thread pipe , I deal for use as modern art or for water use in your bore pump , some i have new ,i have had these for many years and just want to get rid of them I would like to sell the lot but you can buy just 1 or 10 of them but my min sale is $30 or 10 items The below cost are for the fittings that i have in stock a bend will cost 20 % more a tee will cost 50% more To give you an idea 20 mm 3/4"

1 only 100 mm flange bend = $100 1 only 50 mm pump bore head flange with weld in tee = $150 1 only 80 mm pump bore head flange = $150 1 only 100 mm bore head flange stub head = not in picture (similar to main piture) = $150 the bore heads are to hang submersible pump column pipes off and sit on top of your bore i also have other odd sizes welded , Please you have to call me first to arrange to see Sorry I will not answer emails or text messages due to too many scams emails and R

Free Delivery included ✔️ All our items are in New Condition ✔️ Inspections are welcome ✔️ Please send us a message if you have any questions. Features of the Submersible Bore Pump: • Better flow rate than any other brand of bore water pump • 83L/min at a depth of 51 metres - 17L/min at 155 metres • 20 impellers • 155m max head • Highest quality 304-grade stainless-steel housing • Brass inlet and outlets • Can be mounted horizontally as well as vertically • Submersible down to a water depth

Free Delivery included ✔️ All our items are in New Condition ✔️ Inspections are welcome ✔️ Please send us a message if you have any questions. Features of the Submersible Bore Pump: • Stainless Steel Body • Edible oil filled motor, stable& reliable running with pressure regulating membrane • Single phase motor with built in B Grade oil proofed capacitor and thermal mode protector

Free Delivery included ✔️ All our items are in New Condition ✔️ Inspections are welcome ✔️ Please send us a message if you have any questions. Features of the Submersible Bore Pump: • Stainless Steel Body • Edible oil filled motor, stable& reliable running • with pressure regulating membrane • Single phase motor with built in B Grade oil • proofed capacitor and thermal mode protector

• AEG

3 phase 3 HP bore pump. Was removed when block was subdivided a few years ago and has since been in my shed . It was working at time of removal and can still be turned over by hand

Free Delivery included ✔️ All our items are in New Condition ✔️ Inspections are welcome ✔️ Please send us a message if you have any questions. Features of the Log Splitter: • Petrol Engine Pull Start • Cycle Time Approx. 13 seconds • Maximum Splitting Power 22 Ton • Maximum Log Length 20” (50.8 cm) • Maximum Log Diameter 11.8" (30 cm) • Cylinder Bore Size 3-1/8” • Gear Pump Displacement (ml/rev) 3.5 GPM • Hydraulic Oil Capacity 4.3 L

Free Delivery included ✔️ All our items are in New Condition ✔️ Inspections are welcome ✔️ Please send us a message if you have any questions. Features of the Petrol High Pressure Water Pump: • Powerful 2000W 28,000L/H submersible pump • Rust resistant stainless steel casing • Safety leak-proof seals • Fully automatic float switch • Adjustable switch height for different needs • 10M highly conductive copper cable • Suitable for both salt clean and dirty water • Capable to handle solids up to

Free Delivery included ✔️ All our items are in New Condition ✔️ Inspections are welcome ✔️ Please send us a message if you have any questions. Features of the Submersible Bore Pump: • Best flow rate of any bore water pump • Highest quality 304-grade stainless-steel housing • 83L/min at a depth of 120 metres - 17L/min at 195 metres • Brass inlet and outlets • 28 impellers • Can be mounted horizontally as well as vertically • 210m max head

Free Delivery included ✔️ All our items are in New Condition ✔️ Inspections are welcome ✔️ Please send us a message if you have any questions. Features of the Submersible Bore Pump: • Power: 2.0HP, 1.5KW • Max Head: 160m • Max Flow: 84l/min • Max Depth: 30m • Stainless Steel Body • Edible oil filled motor, stable& reliable running with pressure regulating membrane • Single phase motor with built in B Grade oil proofed capacitor and thermal mode protector

1.5 Hp bore pump with low water cutout switch. Works well. Selling as it is just too powerful for my bore.

An unfortunate sale, due to our low flow bore. Used for a maximum of 30 minutes and ascertained the water flow of the bore was to slow for the pump. The pipe and fittings were already down the bore, when we bought the property in December 2023. 1 x ONGA OJ700-1 jet pump (purchased price $2629.00) 19 x meters of poly pipe with top pump fitting and bottom jet fitting.