24 Results: New & Used in Power Tools in West Swan 6055, WA

Please note that this machine is supplied with a new set of Ridgid cutting dies. Specifications: Condition: Used Type: Electric Pipe and Bolt Threading Machine Make: Ridgid Series: Compact Model: 300 Part: 58752 Serial: AF077390315 Pipe: 3mm to 50mm Bolt: 6mm to 50mm Speed: 38rpm, 52rpm Chuck: Hammer Type Motor: 1/2hp, 240VAC Accessories: New Threading Die Set, Stand, Foot Switch Weight: 52.3kg Replacement price on this unit is approximately AUD$6800

Three available - end of project Specifications: Condition: Used Type: Vacuum Base Diamond Core Drilling Stand Make: Hilti Model: DD-ST 150-U CTL Serial: 042124 Base: 470 x 246mm Height: 953mm Fix: Vacuum Accessories: Handle Weight: 14.5kg Replacement price on this unit is approximately AUD$2800

TWO AVAILABLE These units were purchased for a project but never used. Specifications: Condition: New Type: Pneumatic Airless Paint Spray Gun Make: Graco (USA) Series: Triton D16A Model: 233480 Serial: A274509 Pump: 1:1 Ratio, 24B236, C16D, Serial# Hose: Nil Gun: Nil Pressure: 100psi, 7bar Flow: 32 LPM max freeflow Accessories: Nil Weight: 13.6kg Replacement price on this item is approximately AUD$2950

• Makita

Specifications: Condition: Used Type: Electric Impact Wrench Makes: Makita Model: TW1000 Serial: 58799 Power: 1200W Torque: 1000Nm Speed: 1400rpm Impact: 1500/min Accessories: Handle, Hard Case, 55mm Sockets, Spare rubber nose cover Weight: 14.5kg Replacement price on this kit is approximately AUD$1250

Specifications: Condition: Used Type: Electric Impact Wrench Makes: Makita Model: TW1000 Serial: 67230 Power: 1200W Torque: 1000Nm Speed: 1400rpm Impact: 1500/min Engraving: "T3865410" on bottom Accessories: Handle, Hard Case, 2 x 32mm Sockets Weight: 14.0kg Replacement price on this kit is approximately AUD$1250

• Metabo

** Please note that this unit does not come with a fluid bottle. "Features: • Powerful magnetic core drill with large lift for core and full drilling • Robust Metabo Marathon Motor for up to 5 times increased service life for extra long service life • Integrated coolant container for optimal cooling of vertical and horizontal bores • Automatic coolant feed to the tip of the drill bit enables the machine to be used single-handedly • Magnet base with high holding power for safe operation

Specifications: Condition: New Type: Electrical Extension Cable Make: Appleton Series: PCX Model: 2P T 16A Length: 25m Plugs: PRE316PB & PRE316MB Rating: IP66 Weight: 6.3kg

I have a few of these available Specifications: •Condition: Used •Type: Portable Socket Outlet GPO •Make: Spinefex •Series: Lifeguard •Model: LG6.6APSOA15W •Rating: 15A, 3600W •RCD: 30mA •Outlets: 6 x 15A 240VAC •Protection: IP65 •Housing: Polyethylene •Weight: 3.0Kg Replacement price on this unit is approximately AUD$600

I have a few of these available. The one in the photo is typical of their cosmetic condition. Specifications: Condition: Used Type: Portable Socket Outlet GPO Make: Spinefex Series: Lifeguard Model: LG6.4APSOA15W Rating: 15A, 3600W RCD: 3mA Outlets: 4 x 15A 240VAC Protection: IP65 Housing: Polyethylene Markings: Weight: 2.6Kg Replacement price on this unit is approximately AUD$450

Specifications: Condition: Used Type: Pneumatic Impact Air Wrench Make: Kuken Model: KW3800 Serial: L60013 Drive: 1 inch, 25mm Torque: 1800Nm max (300Nm to 1370Nm recommended) Bolts: up to 1.5" recommended Flow: 21.2cfm Speeds: 4 Direction: Fwd/Rev Accessories: Nil Weight: 7.4Kg Replacement price on this unit is approximately AUD$1500

Specifications: Condition: Used Type: Electric Impact Wrench Makes: Makita Model: TW1000 Serial: 68681 Power: 1200W Speed: 1400rpm Impact: 1500/min Accessories: Nil Weight: 8.5kg Replacement price on this kit is approximately AUD$1250

Specifications: Condition: Used Type: Impact Wrench Rattle Gun Make: Makita Model: 6906 Serial: 416438 Drive: 3/4", 19mm Power: 850W, 588Nm Direction: FWD/REV Input: 240VAC Accessories: Metal Case, user Manual Weight: 5.5kg Replacement price on this unit is approximately AUD$900

This drill was kept as a spare on the Gorgan Gas Project and is unused. It has a laser asset number etching on the side. It does not come with a drift or handle. "Features Powerful three-speed drill with extra high torque Robust mechanical gearbox with oil bath lubrication Robust die cast aluminium gear housing for optimum heat dissipation and durability Vario (V)-Electronics for working at customised speeds to suit various application materials Safety clutch: mech

" .... The HMD150 is small, powerful, and a has a full 25mm depth of cut. The HMD150 is a fabricator's dream. It gets into tight spots with the low profile 7-13/16" height. Also it has the lift detection safety feature, eliminating safety switch adjustments. The HMD150 uses the Rotaloc PlusTM cutters from Hougen. They have a bayonet-style twist and lock shank for quick cutter changes. Rugged and full of power the HMD150 is great tool for construction and fabrication ...... 12-35 mm capacity wit

Specifications: Condition: New Type: Pneumatic Impact Wrench Make: Ingersoll Rand Model: 2171XP Serial: SR12F06002 Drive: 1", 25.4mm Force: 1250 ft lbs RPM: 6000 max Directions: Fwd/Rev, full power both ways Accessories: Hose Safety Lead Weight: 5.5kg Replacement cost is approximately AUD$1700

Specifications: Condition: Used Type: Electric Impact Wrench Makes: Makita Model: TW1000 Power: 1200W Speed: 1400rpm Impact: 1500/min Accessories: Nil Weight: 8.5kg Replacement price on this kit is approximately AUD$1250

Specifications: Condition: Used Type: Impact Wrench Rattle Gun Make: Makita Model: 6906 Drive: 3/4", 19mm Power: 850W, 588Nm Direction: FWD/REV Engravings: "T1363240" on side Input: 240VAC Weight: 5.5kg Replacement price on this unit is approximately AUD$900

2 available. These rattle guns were kept as spares on a local gas project. They have asset engavings but have never been used. Specifications: Condition: New Type: Electric Impact Wrench Makes: Makita Model: TW1000 Serial: 63898 Power: 1200W Speed: 1400rpm Impact: 1500/min Engraving: "T3789814" on side Accessories: Handle, Socket, User Manual, Hard Case Weight: 12.0kg Replacement price on this kit is approximately AUD$1250

I have a few of these rattle guns that are surplus equipment at the end of gas project. This unit was held as a spare and appears to have had litttle if any use. Specifications: Condition: Used Type: Electric Impact Wrench Makes: Makita Model: TW1000 Serial: 53534 Power: 1200W Speed: 1400rpm Impact: 1500/min Engraving: "T3238623" on side Accessories: Handle, User Manual, Hard Case Weight: 12.0kg Replacement price on this kit is

Specifications: Condition: Used Type: Power Distribution Board Make: Bosbox Model: Bosbox15A Rating: 3600W Input: 15A 240VAC Outputs: 6 x 15A 240VAC GPO RCD: 30mA Enclosure: IP66 Weight: 3.0kg Replacement price on this unit is approximately AUD$65

I have a few of these available, also 15A 6 Outlet versions. Specifications: Condition: Used Type: Portable Socket Outlet GPO Make: Spinefex Series: Lifeguard Model: LG6.4APSOA10W Rating: 10A, 2400W RCD: 10A Outlets: 4 x 10A 240VAC Protection: IP65 Housing: Polyethylene Markings: "Downer", various Weight: 3.0Kg Replacement price on this unit is approximately AUD$450

These batteries are surplus from the end of a gas project. The one in the photo is typical of the lot and they all appear to have had little if any use. All batteries test and charge up. Specifications: "Cordless high-speed drill exclusively designed for use with the X-BT fastening system High drilling performance on steel with small-diameter drill bits For use with the X-BT system for coated, painted and high-strength steel applications Drilling highly accurate holes fo

Note that the handle axle is bent on the end but it does not affect its operation. Specifications: Condition: Used Type: Drill Stand Make: Hilti Model: DD-CR1 Stroke: 300mm Anchor: Vacuum or HKD M8/HDI 3/8" anchors Accessories: Nil Suits: DD-EC-1 Diamond Coring Machine Weight: 8.5kg Replacement price on this item is approximately AUD$1120

Specifications: Condition: Used Type: Impact Wrench Rattle Gun Make: Makita Model: 6906 Drive: 3/4", 19mm Power: 850W, 588Nm Direction: FWD/REV Engravings: "JHG" Input: 240VAC Weight: 5.0kg Replacement price on this unit is approximately AUD$830