13 Results: ke10 in Queensland

KE10 Corolla rear bumber in pretty good shape. Has a little section of surface rust underneath from the exhaust area. Also has a couple of dents but nothing that cannot be panel beated. The end sections are really good. Has the brackets and light

New old stock "Hills Exhaust" exhaust system to suit Toyota Corolla 1200 KE10 1967 - 70. Part Numbers - M2427 & M2428

KE10 Toyota Corolla tail lights. 2 x lefts and 1 x right. All the brake lenses have a crack here and there. All the indicators haven’t. Bodies are fine and wiring is unmolested. 2 still have the body seal in reasonable condition.

KE10 Toyota Corolla gearbox X member. Brand new and never used. Still has the original black primer paint from factory. Has been stored for an eternity in my shed.

KE10 Toyota Corolla radiator support panel. Another thing I have dug out of the shed. Nice and straight, not bent or twisted. A little surface rust on the underside which will clean up with deoxidine and paint.

KE10Toyota Corolla passenger door. Has been sitting in the shed for years and years. Someone other than me has started filling it and sanding. Has some rust starting at the bottom return lip on the inside. Nothing major that I can see. Photos show that section. Other than that it isn’t to bad, just needs some preparation and time spent on it.

Possibly Ke10, Ke11, Ke36, 1 pin attached, can courier

Toyota Corolla KE10 hubcaps. Set of 5 5 x aluminium outlets and 5 chrome inners. Have scuffs and dents which require peening. Have had a light polish but could do with a machine polish for a high lustre

Toyota Corolla KE10 door sill plates. Well worn, but all in 1 piece Can be peened to. Shape if you have the time and patience.

Professionally built Toyota hilux 30 spline diff to suit a Mazda rx2 or Cappella sedan or coupe Is built back to standard specs except the addition of the new hi tensile pan hard rod pin and upgraded boxed brackety for the pan hard rod to clear the back of the diff housing… Is 1350mm wide Standard rx2 mounts 4x110 PCd 1/2unf wheel studs Brand new r31 slotted and dimpled disks redrilled Rebuilt r31 skyline Calipers New pads New hard brake lines to suit standard rx2 samples I have with mount to

For sale is a modified hilux diff converted to fit a series 2 with the disk brakes BUT would fit a series 1 and get you a disk brake upgrade Comes with new machines axles 4x110 pcd, CNC machined in Rebuilt series 2 Calipers New pads New bearings 1/2unf 2.5in studs New brake lines Modified Calipers Adapting brackets Can come with a 4.1/4.3/4.55/4.8 lsd that gets pulled apart inspected, gears modified,, bearings if required and new seals Diff will be 1440mm wide not the 1455 like standard Will

Toyota KE10 Corolla Radiator Support Panel. Excellent condition, nice and straight. Minimal surface rust underneath. Local pickup or can post at buyers expense.

Toyota KE10 Corolla Front Windscreen Cowl Panel. Straight & rust free, only minimal surface rust underneath. Has primer coat. Local pickup or can assist with freight at buyers expense.