35 Results: New & Used in Tools & DIY in Brunswick East 3057, VIC

Selling here the renowned Tornador Z-020 Black, essential for both car detailing enthusiasts and professionals. Versatile for general-purpose cleaning as well, it utilizes compressed air to combine with detergent solution or water, producing a potent jet for deep cleaning and degreasing various surfaces. Included is a Nitto-style attachment for seamless integration with your air compressor. Available from pickup in Brunswick East

These 4 metal rulers all have a bit of age on them and are in very good condition. There are 3 x 30 cm rules and 1 x 6 cm rule, all of which are double sided. The 'longer' of the 30 cm rulers is a flexible 'Biltema' - Stainless Hardened' ruler another is a 'Micador' that was produced in Japan whilst the other loner one is unlabeled and a far more rigid workman's style ruler with thicker metal. The little 6 inch one was made in China and has 'stainless' on it. Inspection available as is local pi

This is a vintage, iron, art deco, sliding bolt for a door or a gate that was produced around the middle of the 20th century or a little bit before. It's in good working order and is absolutely rock solid. The bolt has a length of 15 cm which extends out a further 2 cm when pushed across and the base plate measures just under 3 cm. Inspection available as is local pick up. FREE POSTAGE AVAILABLE. (PayPal, Bank deposit or Pay on pick up available).

This is a single, swivel eye, zinc alloy, nickel plated pulley that was produced in Taiwan. It is in excellent working condition, measures 10 cm from top to bottom with a width of 5 cm and weighs 310 grams. Inspection available as is local pick up. Postage if required is $10.00. (PayPal, Bank deposit or Pay on pick up available).

These are 3, vintage inside spring calipers produced in the first half of last century and all of which are in good working order. The largest caliper has a total length of 7 inches (17.5 cm) opens to a full width of 6.5 inches (16.5 cm) and was produced in the USA by 'SAMSON TOOL Mfg' of Newark, New Jersey which is stamped on the tool. The other 2 smaller calipers are by the iconic English tool maker 'Moore & Wright' of Sheffield, England which is also stamped on the tools. They have respectiv

This is a large, vintage, outside diameter, spring caliper produced in the first half of last century by the iconic English toolmaker 'MOORE & WRIGHT' of Sheffield, England which is stamped on the tool - See pictures. This caliper which is used to measure the external size of an object is in lovely vintage condition and full working order. It's total length is 9 inches (23 cm) the length from the spring nut to the bottom of the tool is 6 inches (15 cm) and it opens to a maximum width of 8 inche

These are 2 x VINTAGE, bow cut swords that would make great decor pieces hanging up though they are both certainly still usable. The blades are rusty and would need to be either replaced or sharpened but the frames are both rock solid and the handle clips open and close again tightly. The larger orange saw has a length of 82 cm and a width of 24 cm whilst the shorter black saw with the red clip has a length of 62 cm and a width of 21 cm. Inspection available as is local pick up. Postage if requ

A pair of of vintage 'GILBOW' Tool Company Ltd 14" (350mm) tin snipes that were produced in England and are model: G245. They weigh 900 grams, and have 85mm blades that still cut but have rust on them - See pictures. Inspection available as is local pick up. Postage if required is $14.00. (PayPal, Bank deposit or Pay on pick up available).

This is a Lot Of 4 Vintage Ball Pein hammers with the older 3 being particularly vintage pieces and the 3rd, lighter handled hammer a little more recent - See pictures. The handles on the 2 thinner, older hammers are fairly worn with some rust on the heads and would be mainly collector pieces whilst the thickest handle older hammer and the newer one are still very sound and would be fine to use. Their length measurements are: 30 cm, 27.5 cm, 25 cm and 24 cm respectively and they weigh a combine

Briggs and Stratton Sprint 375 - not starting reliably Pickup at the Brunswick Tool Library, 127 Nicholson St in the Coles underground carpark. Open until 2pm today (Saturday) and 4pm-8pm Monday and Wednesday How to get here once you get to the address: https://www.instagram.com/reel/Ctd6j1cPhKF

• Other

Power Outlet 4x15A For worksties and outdoor use. IP44 ingress protection. This is never used, as new.

• Other

Power cable 15A 25meters For caravan, worksites etc. Still in packaging, never used, as new condition.

• Ozito

Motor runs well, safety snaps back well. Blade is a little rusty. Pickup asap at the Brunswick Tool Library, in the Coles underground carpark at East Brunswick Village, 127 Nicholson St Brunswick East. Open till 8 tonight

This is a 'BETTS' Professional 1200mm, shockproof, spirit level measuring tool. The tool is in full working order and good cosmetic condition with just one of the end rubbers missing - See pictures. Inspection available as is local pick up. (PayPal, Bank deposit or Pay on pick up available).

BENCH GRINDER, HAND DRIVEN, 4" WHEEL Hand Screw Attachment to Bench Post $15

• Makita

"MAKITA" DISC GRINDER 240V 380 W, 100 mm Disk size, MOD 9501B Made in JAPAN Sound Working Condition, no disc guard. 2.1 kg, 30 x 12 x 12 cm Post $23

'SHERMATIC' 1/2" DUAL SPEED POWER DRILL 240 V, 20 Amp, 750/2000 RPM and MADE IN AUSTRALIA Very Good Working Condition 4.3 kg

• Bosch

"BOSCH" ROTARY HAMMER, UBH 6/35D HAMMER ACTION APPLIES CONTINUALLY. ie. NO DRILL ACTION WITHOUT HAMMER! 240V 800W SPLINED SHANK DRIVE SHAFT C/W DRILL CHUCK AND KEY DRILL CHUCK CAPACITY: 5-13mm MADE IN GERMANY Excellent Condition

Selling x4 Assorted Chisels. Pickup from Brunswick East

Selling x6 Assorted USED Hacksaws. $100 the lot Pickup from Brunswick East

• Bosch

Selling a USED Bosch Professional Corded 2200W 230mm (GWS 22-230 LV) Angle Grinder. Made in Germany Disc NOT Included!!! The powerful tool with the lowest weight. Powerful 2200W Champion motor and straight handle. Lowest weight in its class. Features: - Anti-rotation protective guard – quickly and easily adjustable, provides reliable protection - Softgrip for convenient handling of the machine - Armoured coils that protect the motor against sharp grinding dust ensur

Selling a USED Milwaukee MLBX78 2000mm (78") RedStick Box Spirit Level. Features: - ALL-METAL BACKBONE Strongest, most durable frame. Reinforced vial retention - SHARPSITE Vial Technology provides best readability and impact protected - Guaranteed Lifetime Accuracy, accurate to .029° ( .0005"/in, 0,5mm/M) - High Contrast Vial System is easy to clean and optimizes visibility - High Density, Removable End-Caps protect frame and provide access in tight spaces - Wide, durable handles for c

• Milwaukee

Selling a USED Milwaukee M18CH 18V Li-ion Cordless Brushless Fuel 26mm SDS Plus Rotary Hammer. No battery or charger included Features: - FUEL™ Technology: Delivers faster than corded speed and durability - POWERSTATE™ Brushless Motor provides 2.7J of blow energy - Powered by REDLITHIUM™ battery technology - REDLINK PLUS™ Intellegence Electronics - All metal direct drive delivers maximum tool life with minimal tool maintenance - AVS, Anti-Vibration System, misimise

• Makita

Selling a USED Makita DHP458 18V Li-Ion Cordless Hammer Drill Driver. No battery or Charger included Features: - All metal gear construction - Extra-high - Transmission durability - Belt clip and bit holder - Battery fuel gauge - Single sleeve key less chuck allows for easy bit installation/removal by one hand - Torque setting ring - Wider torque range of 1-10 NM in clutch mode allows for versatile applications