28 Results: New & Used in Tools & DIY in West Gosford 2250, NSW

• Makita

Very good condition. Skin only. $100

Pick up only at Grieve Road West Gosford.

Pick Up Gosford Or Shipping Available Australia Wide. Fuller Tool Company No.1070 Ratchet Bit Brace Hand Drill 10" Sweep Ratchet Head @ Gosford or Ship At Your Expense. Excess workshop tools, no longer required. Comes as pictured. We have 2 units available. 1 Purchase = 1 Hand Drill. Each unit is new old stock, and as that is the case each unit some blemishes and oxidization evident. Condition: Each unit is new old stock, and as that is the case each unit some blemishes and oxidization

• Dewalt

Pick Up Gosford or Shipping Available Australia Wide. Dewalt DW268-XE Hi-Powered 540w Screw Driver Drill Electric Power Impact Driver @ Gosford or Ship at your expense. Excess workshop tools, no longer required. Comes as pictured. Condition: Good Condition, Great Use. Working. Cosmetics, See Pictures and Make Your own Decision. Payments by Cash on Pick Up, PayID, Bank Deposit, or PayPal. For collection reservations that exceed 24 hours, a $20.00 holding deposit is required. This amou

Log chocks (come as a set of 2) to suit our full range of mills. They are designed to sit over the existing bunks to secure large logs, whilst taking advantage of the log rests already in place. Great solution for anti-roll back on logs using the existing dogging.

Pick Up Gosford or Shipping Available Australia Wide. Stanley FMHT81394-3 FATMAX Stapler 3-Stick Floor Hammer Tacker Staple Gun @ Gosford or Ship at your expense. 1 Purchase = 1 Unit. (I have up to 6 available) Tools no longer required and are excess to our requirements Condition: Great Condition, Good Use, Well Kept. Cosmetics, See Pictures and Make Your own Decision. Payments by Cash on Pick Up, PayID, Bank Deposit, or PayPal. For collection reservations that exceed 24 hours, a $2

Heavy Duty cover designed to protect the Hydraulic Pump, suitable for use whilst traveling. Fits all mills with hydraulics.

• Other

Pick Up Gosford or Shipping Available Australia Wide. KANGO 501 Corded Rotary Hammer Drill1 675W Electric Power Demolition Drill @ Gosford or Ship at your expense. Sensational Condition, Low Use, Well Kept. Tested And Working recently. Cosmetics, See Pictures and Make Your own Decision. Sensational Condition, Low Use, Well Kept. Tested And Working recently. Cosmetics, See Pictures and Make Your own Decision. Payments by Cash on Pick Up, PayID, Bank Deposit, or PayPal. For collection res

• Other

BE HONDA GX HIGH PRESSURE PUMP 330L/min MAX FLOW RATE 6.5HP PETROL ENGINE SINGLE IMPELLAR - FULL SPECS IN PHOTOS **WAS $930 GST - REDUCED TO $770 GST !!!!!!!! LOCATED WEST GOSFORD NSW

• Other

Pick Up Gosford or Shipping Available Australia Wide. KANGO 840M Corded Rotary Hammer Drill1 1005W SDS Electric Power Demolition Drill @ Gosford or Ship at your expense. Sensational Condition, Low Use, Well Kept. Tested And Working recently. Cosmetics, See Pictures and Make Your own Decision. Payments by Cash on Pick Up, PayID, Bank Deposit, or PayPal. For collection reservations that exceed 24 hours, a $20.00 holding deposit is required. This amount is deducted from the agreed final sale

Made in Australia Flatten your slabs out Fits the Gt40 Ultra Gt34 Deluxe and Gt26 Deluxe as well as all twin rail mills. Router bit ½ inch, included. Supply your own router. Fits all popular brand routers. Will also fit a disc sander. Maximum with slab 105 cm Maximum height 25cm Delivery in 3 weeks Guaranteed. 12 months warranty

Pick Up Gosford or Shipping Available: HILTI MD2000 Adhesive Dispenser Epoxy Gun Caulking Guun Hand Tool MD-2000 @ Gosford or SHIP at your expense. Ex-Workshop use, no longer required, and excess to our needs. Good Working Condition, Good Use. Cosmetics, See Pictures and Make Your own Decision. Payments by Cash on Pick Up, PayID, Bank Deposit, or PayPal. For collection reservations that exceed 24 hours, a $20.00 holding deposit is required. This amount is deducted from the agreed finale

Pick Up Gosford or Shipping Available: Solid Steel Mil!tary Storage Box 9Kg Metal Armmy Transport Box 49x47x21cm @ GOSFORD or Ship at your expense. Good Use, Well Kept. Obvious Surface Rust as pictured. Cosmetics, See Pictures and Make Your own Decision. Payments by Cash on Pick Up, PayID, Bank Deposit, or PayPal. For collection reservations that exceed 24 hours, a $20.00 holding deposit is required. This amount is deducted from the agreed finale sale value, and good for 1 week.

Australia Made Manual Toe Board Attachment for GT40 Ultra Sawmill Designed to lift tapered logs, so the blade will travel along the grain of the log instead of up through the log, ensuring stronger boards and a higher recovery rate. It suits the sawmill ground model or trailer model.

GT26 Deluxe Portable Sawmill (Powered by YANMAR) – Ground Model Power : Diesel Portable Sawmill (Powered by YANMAR) Log Diameter Capacity : 711.2mm(28″) Maximum board length : 4.9 metres Maximum Cut Depth : 457.2mm(18″) Maximum Cut Width : 609.6mm (24″) Last Cut Off Deck : 2.5cm(1″) Track Rail Construction : 63mm x 100mm(2.5″ x 4″) Galvanised Steel Rails Track Log Bunks (Rectangle Tube Steel) : 75mm x 150mm(3″ x 6″) Powder Coated Levelling Feet : Set of 18 Included Log Clamps : Set of 2 (Screw

Australian made anti-roll back log loading ramps and winch. This log loading kit is a must have accessory to get those logs off the ground and on to the trailer. Ramps easily attach to any sawmill trailer. Comes with a winch option (electric or manual). The winch system folds away under the sawmill for easy movement when travelling with the trailer. Spring loaded monster cleats collapse for loading and to prevent log roll back This useful tool allows you to lift logs up from the ground So

Log Loading and Rolling Ramp for GT40 Australian made anti-roll back log loading ramps and winch. This log loading kit is a must have accessory to get those logs off the ground and on to the trailer. Ramps easily attach to any sawmill trailer. Comes with a winch option (electric or manual). The winch system folds away under the sawmill for easy movement when travelling with the trailer. Spring loaded monster cleats collapse for loading and to prevent log roll back This useful tool allows

GT34 Deluxe Diesel Portable Sawmill (Powered by YANMAR) – DRIVE AWAY PACKAGE Come in Today and Drive Away with your own GT34 Deluxe Diesel Portable Sawmill. Stationary Trailer Weight Rating with Jacks Support 3.5t Get a fully assembled Portable Sawmill on Trailer that is Road Registered and ready to drive out the door. * If you need the trailer registered for a state (other than NSW) we can help you apply for a road permit to tow home. *Log loading and rolling ramps, extra blades and other o

GT34 Deluxe Diesel Portable Sawmill (Powered by YANMAR) – Trailer Model Powered by a state of the art Yanmar L100N Diesel Engine (MADE IN ITALY) Vertical cylinder, 4-cycle, air-cooled diesel engine. Compact, direct injection engine. Easy installation & low fuel consumption. Low vibration and low noise. A little engine built to stand up to hard work. Fast, effortless starts from electric start. The GT34 Portable Deluxe Sawmill has arrived! Stationary Trailer Weight Rating with Jacks Support 3.5

GT34 Deluxe Diesel Portable Sawmill (Powered by YANMAR)- Ground Model Powered by a state of the art Yanmar L100N Diesel Engine (MADE IN ITALY) Vertical cylinder, 4-cycle, air-cooled diesel engine. Compact, direct injection engine. Easy installation & low fuel consumption. Low vibration and low noise. A little engine built to stand up to hard work. Fast, effortless starts from electric start.

GT40 Portable Deluxe Sawmill TrailerModel Features: Overall Length: 9.2 metres Height: 2.6 metres Width: 2.1 metres 23hp Honda petrol Engine 40″1016 Diameter Log Cut 6.80. Standard Log Length Cut 1000 mm maximum wide board width 3x manual log dogging system kerf ruler in inches/mm Log rests 19 inch band wheels Rocker roller suspension Supplied with power lift, electric 12 volt head up/down run off the battery Dual Axle Electric brakes (with electric break away system) Blade Automatic Lube Syst

GT40 Portable Deluxe Sawmill Ground Model 1 meter wide cut sawmill for the right price! The GT40 portable sawmill is built upon the heavy-duty frame construction found in our GT 40 sawmill model which incorporates 200mm main frame trail structure, 4-post head. This mill offers the sawyer the ability to cut up to 40″ 1000mm diameter logs with a fully hydraulic mill options. There are no light duty components as you’ll find in similar portable sawmills. Every function. From the massive #

Chrome Plated Single and Double Wallstrip Various Sizes 900mm up to 2100mm

150cm Ash Handle Cant Hook - Hand Forged: - Hand forged in Austria by Muller - Lifetime Warranty Perfect for turning logs and moving logs on to and off the sawmill and general movement of logs Brand new Heavy duty,top of the range Muller Axe 150cm Cant Hook/wood turning hook. Made in Austria comes with Ash handle and hand forged hook. Weight 10 kg Dimensions 169 × 30 × 15 cm