10 Results: bobcat hydraulic in Toowoomba Region, QLD

For sale Digga tilting hitch Suits universal bobcat mount, to fit kubota, cat, gehl, mustang, Clark, positrack and most skid steers without modification to suit a Toyota. Hydraulic line plugs into your machine, your attachment then plugs onto the hitch. Has a 2 pin Anderson plug (can be swapped) for activating 3rd function on your 4 in 1 bucket or other attachment on the front. Was replaced with a 6 in 1 bucket so no further use. Can load this end with forklift

The price includes GST. New Agrotk EXRC-54 Excavator Rotary Brush Cutter Slasher Mower suit 3-10 Ton machine. Great for mowing steep banks, around ponds & dams, cutting back brush on roadways and trails, reaching over fences and guardrails etc. Direct drive one-way check valve hydraulic motor. Skid rails run along the entire mower deck sides. Hydraulic hoses and 1/2" flat faced Quick Connect Couplers included (see Pic #10). Cutting Width: 54" (1372mm). Cutting Height: 1.6" (41mm). Blades: 2.

Price includes GST. New Jea Wen JW450 Excavator Hydraulic Hammer Rock Breaker to suit: 1-3 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with a 43.6mm Point Moil, Hoses, Manual, Toolbox with various Spanners etc. and a Nitrogen Gas Bottle & Pressure Gauge Kit for regassing the breaker. The Hitch Headstock currently has 30mm Pins fitted into collar bosses that fit into 45mm diameter Pin holes, so pins up to 45mm diame

Price includes GST. New Vickey Industrial / Handy Attachments SHB680 Bobcat/Skid Steer/Positrack Hydraulic Rock Breaker Hammer. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with two 67mm Point Moils, Hoses, solid steel Stand (47kg) for storing the breaker in a vertical position, and a Nitrogen Gas Bottle for regassing the breaker. Hoses fitted with Quick Release Couplings (see pic# 9). Manufacturer's Website: https://www.vicke

Price includes GST. Used Excavator Hydraulic Hammer Rock Breaker to suit: 4-10 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 80mm Point Moil and hoses as seen in pics. Breaker Dimensions: 1150mm(L) x 395mm(W) x 580mm(H), Weight: 428kgs. Optional Removable Headstock: There is also a matching Bolt-On Headstock if the pin setup will work for you for $350 (see Pic #10). It has 45mm Pin hole Diameter, 235mm Center t

Price includes GST. New Zhenshan 680 Excavator Hydraulic Hammer Rock Breaker to suit: 4-8 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 2x 67mm Point Moils, Hoses, Nitrogen Gas Bottle. The Breaker is New & Unused, but has a few small chips and scratches in the paint. The Hitch Headstock currently has 45mm Pins fitted into collar bosses that fit into 65mm diameter Pin holes, so pins up to 65mm diameter can be fi

Price includes GST. Used Excavator Hydraulic Hammer Rock Breaker to suit: 5-10 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Comes with 63mm Point Moil, Hoses with Quick Release Couplings. Breaker Dimensions (with moil): 1620mm(L) x 380mm(W) x 445mm(H) (620mm High with Hoses), Weight: 340kgs. Current (removable) Headstock Dimensions: 50mm Pin Diameter, 305mm Pin Center to Pin Center (CtoC), 204mm Between the inside Ear Bo

Price includes GST. Used Toku TNB-6E Excavator Hydraulic Hammer Rock Breaker to suit: 5-11 ton machine. Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc. Striking Rate: 550~1000 BPM (Blows/Min). Hydraulic Flow: 45-80 L/min. Operating Pressure: 10-16 MPa (*****2321 PSI). Tool (Moil) Diameter: 95mm. Gas Pressure: 0.8 MPa (116 PSI). Made in Japan by Toku: https://www.toku-net.co.jp/en Please Note! There are 2 bolts missing on the Headstock (

The price includes GST. New Excavator Hydraulic Thumb Grapple Grab Bucket suit 1-3 Ton machine. The bucket moves as a normal bucket attached to your hitch or directly to your dipper arm. The Thumb moves Hydraulically. Designed for Rock & Log work, but can also be used for demolition and general material handling, picking things up, moving them around and other careful placement tasks. Required Oil Flow: 25-30 L/min. Working Pressure: 100-110 bar. Headstock Dimensions: * The Pin Diameter is

The price includes GST. New Excavator Hydraulic Quick Hitch Coupling to suit 3-7 Ton machines. Fully Automatic with Dual Pin Locking (no need to leave the cab to remove / re-insert the safety pin). It has a low profile and light weight. Strong and well engineered. Made by Volvo in Ireland. It is brand New, never used. It was fitted to a new Volvo ECR58 and shipped to Australia then removed by Volvo when their customer wanted a tilting hitch fitted. It then sat in a Volvo warehouse for 5 year