2 Results: hq monaro in Victor Harbor 5211, SA

Hq sandman - monaro grill badge presents well , insert has been glued in , so has no retaining clips.hard to find in any condition

This was out of a HQ Statesman & the engine number says its from that type of H series holden. Trimatic bolt pattern. Its 60 thou oversize with 2 crook bores which need sleeving. The rest of the bores look ok with minor ridge. The pistons are high comp ones and look quite good. The block has never been decked and still has its 11QT engine number. The crank looks good & the big end bearings are 30 thou over. The rear main seal is a graphite rope type. Gotta be rare these days and good for refurb

Standard head rebuilt with unleaded valves. Driven 10000 miles. As new. I had this head rebuilt four years ago by Lonsdsle Engines but have replaced it with a worked head to suit my cam. Unleaded valves. Lightly skimmed, woth plenty of thumbprint evident. Cast date June 1969. Cost to rebuild was $1000. May suit FX FJ FE FC FB EK EJ EH HD HR HK HT HG LC LJ LH LX UC HQ HJ HX HZ VB Torana GTR XU-1 monaro.

NO TXT,EMAIL OR MESSAGES WILL BE RESPONDED TO, PHONE CALLS ONLY PLEASE. Parts available for HQ - WB, Kingswood,Premier, Monaro, Statesman, ute,van,wagon,sedan,tonner. Engines,gearboxes,diffs,panels,trim,wheels and tyres, exhausts, suspension,brakes etc etc. All prices negotiable, available weekdays after 5pm by arrangement or Saturday and Sunday,PUBLIC HOLIDAYS 9.00am-4.30pm. Rob .

For sale hq gts monaro RPM Gauge $400 Genuine Gts mirrors $400 Located in Adelaide

HQ Holden rear bumper bars $200 each. Bar only no brackets, number plate holders or lights. These bars are in OK condition but all have dents buckles rust and/or holes drilled from spot lights over the years. There are no really good ones. I am more so selling these as a starting point for re-working and re-chroming. They may work out more expensive that a chinese repoduction but will look better and last a lot longer. AUTO SALVAGE RECYCLERS 9 Chrysler road Lonsdale. PH (*******0111 open 9:00-5

HQ Holden front bumper bars $200 each. Bar only no brackets or indicators. These bars are in OK condition but all have dents buckles rust and/or holes drilled from spot lights over the years. There are no really good ones. I am more so selling these as a starting point for re-working and re-chroming. They may work out more expensive that a chinese repoduction but will look better and last a lot longer. AUTO SALVAGE RECYCLERS 9 Chrysler road Lonsdale. PH (*******0111 open 9:00-5:30 weekdays and

Holden six cylinder Aussie 4 speed gearbox. Inspected buy a gearbox mechanic and sold with a 30 day conditional warranty which doesn't cover explosion due to miss treatment or errors on installation. These gearboxes were used in LJ LH LX and UC Torana HK HT HG HQ HJ HX HZ WB Kingswood Premier Monaro ute Panelvan 1 tonner. VB VC VH VK Commodore. Only stock M20 ratio boxes avaiable no M21 or Bathurst stuff. ASR 9 Chrysler Road Lonsdale PH (*******0111 to order open 6 days.

HQ Holden front radiator support panel for twin headlight front end nose cone. Suits Premier, Statesman and LS Monaro. Good condition with just a couple of evident repairs and a magnet sticks everwhere that is primered. Been in storage some 15 years time to go. AUTO SALVAGE RECYCLERS 9 Chrysler road Lonsdale S.A PH (*******0111 to order. Open 9:00-5:30 weekdays and 9:00-2:00 Saturday.

Holden V8 308 ci engine Turbo bolt pattern. I brought this engine in a job lot and the previous owner said it was a good engine and it had been rebuilt not long before being removed from the crashed Statesman it was in. I never saw it running so I'm selling it as is with no warranty but it looks rebuilt and has no engine number as happens on a Holden V8 when you deck the block. The casting date on the block is 30F8 which is either June 1978 or June 1988 ? It comes as pictured in the add with a