44 Results: xt 1966 in Australia

this is for a new FALCON XR/XT (1966-69) FRONT BUMPER BAR. also suits FAIRLANE ZA-ZD. for more details, phone the number supplied during business hours.

Ford Kuga TE 1/2011 - 11/2014 Mackay RBK1161 Sway Bar Link Bush Kit Part No: RBK1161 If unsure, please forward your Rego number (NUMBER PLATE) and we can check for you. Some vehicles, even with the same year, makes and models may require a different part number. Compatible Vehicles; FORD AUSTRALIA KUGA 2.0 D AWD BK SUV 04/13-11/14 120KW FORD AUSTRALIA KUGA 1.6 EcoBoost AWD TF SUV 04/13-11/14 134KW FORD AUSTRALIA KUGA 1.6 EcoBoost TF SUV 04/13-11/14 110KW FORD AUSTRALIA KUGA 1.5 EcoBoost TF SU

this is for a FALCON XR/XT AUTOMATIC INDICATOR QUADRANT. suits 6 cylinder models (B/W 35). no cracks and the chrome is faded. no lens. for more details, phone the number supplied during business hours.

this is for the inner section of a door cut out from an XR Falcon. suits right hand (drivers side) front. it is the section behind the door trim which has the areas specific to an XR model. ideal if someone has an XT/XW/XY door which they would like to modify and turn into an XR door. for more details, phone the number supplied during business hours.

********* LOCAL PICK-UP ONLY ************** this is for 1 FALCON XR/XT FRONT SWAY (STABILISER) BAR. 18mm diameter. needs a good clean up. local pick-up only and i will not be able to wrap it, cover it or package it in any way. if someone is country/interstate and is interested, that is not a problem providing it can be picked up as is. for more details, phone the number supplied during business hours.

Falcon and Fairlane******1972. XR,XT,XW,XY. 8 Cylinder Engines Pick up only. used good condition.

Falcon and Fairlane. Service and repair manual. *****1972. XR, XT, XW, XY Series. 8 Cylinder Engines good condition. $ 40.00 Used Good condition.

Here we have a Right hand rear outer door handle for a Ford Falcon Fairmont XY XW XT or XR as well as Fairlane ZA ZB ZC or ZD sedan or wagon . This is in roadworthy , good Condition and although it’s no perfect it will look great with a good polish up It’s a genuine original part , it will look good on the car as seen in the photos and it will need a good clean up . To suit a******1967******1969******1971 and 1972 model . I have other early ford parts I will list as I empty the shed. It has b

**************** LOCAL PICK-UP ONLY **************** this is for a FALCON XR ⁄ XT front valance panel. it is in very good straight condition. just needs some very minor repair on the lip as shown and a good overall clean up. local pick-up only. i will not be able to wrap it, cover it or package it in any way. if someone is country/interstate and is interested, that is not a problem providing it can be picked up as is. for more details, phone the number supplied during business hours.

Platinum Fuel Pump Gasket - KV518 - Suits: Ford, Holden, Toyota If unsure, please forward your Rego number (NUMBER PLATE) and we can check for you. Some vehicles, even with the same year, makes and models may require a different part number. Compatible Vehicles; FORD AUSTRALIA ANGLIA 105E 1960 - 1965 1.0L Sedan 29KW FORD AUSTRALIA CAPRI 1969 - 1974 1.6L Coupe 60KW FORD AUSTRALIA ESCORT 1968 - 1974 1.1L Sedan 32KW FORD AUSTRALIA ESCORT 1970 - 1976 1.3L Sedan, Wagon 42KW FORD AUSTRALIA ESCORT 1

Toyota Hilux RZN149 1/1998 - 4/2005 Front Sway Bar Link Bush Kit Part No: Mackay A755 If unsure, please forward your Rego number (NUMBER PLATE) and we can check for you. Some vehicles, even with the same year, makes and models may require a different part number. Compatible Vehicles; LEXUS LX 470 UZJ100 SUV 5/1998 - 3/2008 TOYOTA HILUX 2.7L RZN149, RZN154 1/1998 - 4/2005 TOYOTA HILUX 2.0L RZN147 8/1997 - 10/2002 TOYOTA HILUX 2.0L YN57 11/83-09/87 TOYOTA HILUX 3.0 D LN147 08/97-09/00 TOYOTA HI

this is for a FALCON XR/XT steering box. it is the 20:1 ratio style. while turning the steering shaft throughout its full rotation, it does feel a little tight and a little "gritty". it might be more suitable to suit recondition. it has a manual steering pitman arm fitted to it. (i do not have any 16:1 ratio steering boxes or power steering pitman arms). for more details, phone the number supplied during business hours.

THIS IS FOR 1 PAIR OF FALCON XR/XT FRONT INDICATOR HOUSINGS. 1 RH AND 1 LH. BOTH ARE IN GOOD CHECKED WORKING CONDITION. THE LEFT HAND LENS HAS A PIECE BROKEN OFF AND THE RIGHT HAND LENS WOULD STILL BE QUITE USEABLE. BOTH LOOMS HAVE BEEN CUT AND JOINED AS SHOWN AND WILL NEED TO BE DONE AGAIN TO LOOK BETTER. BOTH INCLUDE THE ORIGINAL PLUGS AND THE RUBBER GROMMETS THAT FIT IN THE INNER SKIRT WHERE THE LOOM PASSES THROUGH. for more details, phone the number supplied during business hours.

Rubber boot seals to suit XR XT Falcon Fairmont GT Sedans. Reproduction of the correct solid profile 66-69 XR XT wider channel boot seals to allow soft closure. To order simply message me with your contact details

THIS IS FOR 1 FALCON XR/XT HANDBRAKE HANDLE ASSEMBLY. IT IS AN ORIGINAL USED ASSEMBLY. THE HANDLE STILL LOOKS OKAY FROM THE FRONT WITH SOME USUAL AGEING. THE HANDLE HAS A HAIRLINE CRACK ON THE BACK AS IS SHOWN BUT WILL BE OKAY AS LONG AS THE HANDLE IS USED CORRECTLY. THE HANDLE SHAFT CLICKS WELL WHEN PULLED OUT AND IT HOLDS IN PLACE WELL AS IT SHOULD. THE ASSEMBLY WILL NEED A GOOD CLEAN AND PAINT OF COURSE. ONLY WHAT IS SHOWN IN THE PHOTOS IS INCLUDED. for more details, phone the number suppl

this is for 1 pair of FALCON XR RADIUS (STRUT) RODS. both suit either side. one has some wear on a section of the thread (as shown) but it is underneath the crush tube area so will not affect its use. both are not bent or damaged and just need a good clean up. only what is shown is included. NOTE: also, please make sure that you require XR radius rods. XR models had 4 holes on the lower control arm where the radius (strut) rod mounts and the radius rod is straight. (XT-XY models had 2 holes o

FOR SALE FORD 8 3/4" DIFF CENTRE OPEN NON LSD - THIS CAME OUT OF A ZIRCON GREEN XT FAIRMONT 35 YEARS AGO - I JUST REBUILT IT TODAY WITH ALL NEW USA TIMKEN BEARINGS, THE GENUINE FORD GEARS WITH MINT - ITS BEEN PROFESSIONALLY SETUP AND IS READY TO INSTALL - CASE FORD PART # C6OW-4025-A - CAST DATE 6L12 (12th November 1966) NOTE THERE IS NO PROVISION IN CASE FOR OIL FILLER SO MAKE SURE IT MATCHES YOU HOUSING WHICH WILL HAVE A PLUG IN THE BACK TO FILL WITH OIL THIS IS A 8" OR 8 3/4" AS USED IN

FOR SALE 1965 TO 1967 FORD 289 WINDSOR ENGINE WATER PUMP PULLEY WATER PUMP PULLEY - FORD PART # C5AE-8509-B http://www.mustangtek.com/pulley/C5AE-8509-B.html AS USED ON MANY FORD CARS & TRUCKS******1966 1967 INCLUDING XR XT FALCON FAIRMONT FAIRLANE MUSTANG COUGAR PICKUP FROM GOLD COAST - OR CAN ARRANGE FREIGHT ANYWHERE IN AUSTRALIA AT YOUR COST

this is for 1 pair of FALCON XR/XT SEDAN REAR WINDSCREEN SIDE/TOP CHROME MOULDINGS. 1 RH and 1 LH. i could not see any dings and if there are, they are so small that i could not notice them. also, both just have some minor scratches that should polish out well. NOTE: I DO NOT HAVE ANY LOWER CHROME MOULDINGS. for more details, phone the number supplied during business hours.

THIS IS FOR A FALCON XR/XT (1966-69) BORG WARNER 35 AUTOMATIC TRANSMISSION DIPSTICK AND TUBE. THE TUBE HAS 1 VERY SMALL DING NEAR THE TOP AND JUST NEEDS A GOOD CLEAN UP. THE TUBE IS THE "SCREW-IN" STYLE SO PLEASE CHECK YOUR TRANSMISSION TO MAKE SURE IT SUITS. for more details, phone the number supplied during business hours.

Here we have a Left hand rear outer door handle for a Ford Falcon Fairmont XY XW XT or XR as well as Fairlane ZA ZB ZC or ZD sedan or wagon . This is in roadworthy , good Condition and although it’s no perfect it will look great with a good polish up It’s a genuine original part , it will look good on the car as seen in the photos and it will need a good clean up . To suit a******1967******1969******1971 and 1972 model . I have other early ford parts I will list as I empty the shed. It has be

**** SET OF THE SACHS BRAND FRONT SHOCKS ****** BRAND NEW IN STOCK BE QUICK ONCE THERE GONE THEY ARE GONE COMES WITH: 2 X FRONT SHOCKS 311 521 FREE FREIGHT TO SYDNEY METRO AREAS IMAGE IS USED FOR ILLUSTRATION PURPOSES ONLY MESSAGE ME FOR ANY OTHER AREAS FOR FREIGHT COST'S

As New shop manual for Vee Eight Ford Falcon Xr etc and Fairlane ZD c1966-1972 , I can arrange delivery

48001 Vehicle Applications 48001 is suitable for the following vehicles. Select a vehicle for specific fitment details: CHRYSLER VALIANT******1976 - SV1-VK CHRYSLER VALIANT******1982 - CL, CM CHRYSLER VALIANT CHARGER******1976 - VH, VJ, VK CHRYSLER VALIANT CHARGER******1979 - CL FORD FAIRLANE******1969 - FAIRLANE ZA, ZB FORD FAIRLANE******1972 - FAIRLANE ZC, ZD FORD FAIRLANE******1976 - FAIRLANE ZF, ZG FORD FAIRLANE******1982 - FAIRLANE ZJ FORD FAIRLANE 1982-198