316 views
YBA HERITAGE A100 INTEGRATED AMPLIFIER
$1,300
SHIPPING OFFERED
This is an opportunity to grab this rarely come YBA Heritage A100 (100w @ 8ohsm and 150W at 4 ohms) which I Bought from overseas in August this year and used only for testing.
Works fine with no issues.
Please note that the mute button of the supplied remote control does not work. Tried with Logitech Harmony and it works fine.
Please note a tiny dent as highlighted on photos. They are visible only from a very close look. Otherwise, the amplifier and the remote control looking neat and clean.
From YBA website:
All products in the Heritage range utilise the same stylish chassis in brushed aluminum that can be obtained in two different finishes, silver or black.
The chassis rests on three feet, two of which are damped, the third in aluminum ends in a metal ball serving as the vanishing point of the vibrations. The power on/off switch is located on the underside of the chassis towards the front of the left-hand side. Two buttons feature on the front panel, one for source selection and one for volume and centred between them is an oval-shaped display with yellow lettering indicating the connected source and the volume reached. A beautiful remote control will allow you to access the functions from a distance.
The A100 has 5 sets of RCA inputs and 1 balanced. The video input has a by-pass feature (by-passing the preamplifier section). It also has a pre-out should you wish to use a separate power amplifier, a pair of powered speakers or to connect a subwoofer. It has one pair of speaker outputs.
Product type: Integrated Amplifier
Audio outputs: 1 pair of speaker outputs,
1 pre-out (RCA)
Power output: 100W @ 8 Ω per channel, 150W @ 4 Ω per channel
SNR: > 95dB
Frequency Response: 20Hz-20kHz (-0.5dB)
THD N: < 0.04%
Inputs: 5 RCA, 1 balanced
Power Supply: Linear power supply with high performance transformer 320 VA
Color / Finish: Black, Silver
Dimensions (w x d x h): 430 x 400 x 118 mm
I do not have the original shipping box; can pack it safely for interstate shipping. (Allow 2 days for packing and arrangement of shipping after receipt of the payment)
Works fine with no issues.
Please note that the mute button of the supplied remote control does not work. Tried with Logitech Harmony and it works fine.
Please note a tiny dent as highlighted on photos. They are visible only from a very close look. Otherwise, the amplifier and the remote control looking neat and clean.
From YBA website:
All products in the Heritage range utilise the same stylish chassis in brushed aluminum that can be obtained in two different finishes, silver or black.
The chassis rests on three feet, two of which are damped, the third in aluminum ends in a metal ball serving as the vanishing point of the vibrations. The power on/off switch is located on the underside of the chassis towards the front of the left-hand side. Two buttons feature on the front panel, one for source selection and one for volume and centred between them is an oval-shaped display with yellow lettering indicating the connected source and the volume reached. A beautiful remote control will allow you to access the functions from a distance.
The A100 has 5 sets of RCA inputs and 1 balanced. The video input has a by-pass feature (by-passing the preamplifier section). It also has a pre-out should you wish to use a separate power amplifier, a pair of powered speakers or to connect a subwoofer. It has one pair of speaker outputs.
Product type: Integrated Amplifier
Audio outputs: 1 pair of speaker outputs,
1 pre-out (RCA)
Power output: 100W @ 8 Ω per channel, 150W @ 4 Ω per channel
SNR: > 95dB
Frequency Response: 20Hz-20kHz (-0.5dB)
THD N: < 0.04%
Inputs: 5 RCA, 1 balanced
Power Supply: Linear power supply with high performance transformer 320 VA
Color / Finish: Black, Silver
Dimensions (w x d x h): 430 x 400 x 118 mm
I do not have the original shipping box; can pack it safely for interstate shipping. (Allow 2 days for packing and arrangement of shipping after receipt of the payment)
- Date Listed:26/11/2023
- Last Edited:26/04/2024
- Condition:Used
- Shipping:Shipping & Pickup
Similar Ads
- Kenwood KA75 2x80W amplifier with 7 band graphic eq LED Pwr Meters WTYPunching out 80 watts per channel from a design using all discrete output devices, an inbuilt 7 band graphic equaliser (separately assignable to the record output and the listening channel), an LED output meter calibrated to 100 watts per channel, two speaker zones, and even a feature that allows you to record the turntable to another device whilst listening to another source… Kenwood’s 1986 KA-75 is an amplifier that gets the job done. It has two separately selectable speaker zones, and 4 lin$369SHIPPING OFFEREDBulimba, QLD•35w
- Kenwood KA75 2x80W amplifier with 7 band graphic eq LED Pwr Meters WTYPunching out 80 watts per channel from a design using all discrete output devices, an inbuilt 7 band graphic equaliser (separately assignable to the record output and the listening channel), an LED output meter calibrated to 100 watts per channel, two speaker zones, and even a feature that allows you to record the turntable to another device whilst listening to another source… Kenwood’s 1986 KA-75 is an amplifier that gets the job done. It has two separately selectable speaker zones, and 4 lin$369SHIPPING OFFEREDBulimba, QLD•40w
- JVC VN-300 Impressive Silver face Amplifier 2x18W 1975 restrd w WTYA beautifully engineered product from JVC Japan in 1975 that both looks and sounds much bigger than the 2x18W into 4Ω specification would suggest. A very satisfying amplifier indeed. The VN300 can drive two speaker zones (independently or combined), and has inputs for a turntable, a microphone, and four line level (aux) inputs including the tape monitor loop. Tone control is provided via indented high quality sliders (the balance control is a slider too), and loudness compensation is fitted.$359SHIPPING OFFEREDBulimba, QLD•11w
- JVC VN-300 Impressive Silver face Amplifier 2x18W 1975 restrd w WTYA beautifully engineered product from JVC Japan in 1975 that both looks and sounds much bigger than the 2x18W into 4Ω specification would suggest. A very satisfying amplifier indeed. The VN300 can drive two speaker zones (independently or combined), and has inputs for a turntable, a microphone, and four line level (aux) inputs including the tape monitor loop. Tone control is provided via indented high quality sliders (the balance control is a slider too), and loudness compensation is fitted.$359SHIPPING OFFEREDBulimba, QLD•25w
- Monarch SA-600 2x22W Black Face Timber HiFi Amplifier 1969 Restd w WTYMonarch International was an American Hi-Fi brand who had their gear manufactured in Japan. This amplifier (a really nice unit by the way!) would have been manufactured by one of the Japanese factories like Nippon Sound or Nikko Electric. It’s a good looking thing, with a black face, and oiled veneer enclosure, and following a full restore offers a beautiful vintage sound. The SA-600 delivers 18 watts per channel into 8 ohm loads, and 22 watts rms per channel into 4 ohm loads. It has two speak$295SHIPPING OFFEREDBulimba, QLD•7w
- Phono RIAA Preamplifier add turntable in to any amplifier NEWA preamplifier allows you to connect a turntable with magnetic cartridge to an amplifier or other device that does not have a turntable (phono) input. This one connects into any auxiliary input (still allowing you to loop your auxiliary device through if required. Precise RIAA balance and 80dB S/N ratio. Switch auxiliary input, eliminating the need to connect and disconnect the source signal as well as the sharing connection of the product. Metal box 145x95x32mm. Includes 12V Powerpack.$59.95SHIPPING OFFEREDBulimba, QLD•18w
- JVC VN-300 Impressive Silver face Amplifier 2x18W 1975 restrd w WTYA beautifully engineered product from JVC Japan in 1975 that both looks and sounds much bigger than the 2x18W into 4Ω specification would suggest. A very satisfying amplifier indeed. The VN300 can drive two speaker zones (independently or combined), and has inputs for a turntable, a microphone, and four line level (aux) inputs including the tape monitor loop. Tone control is provided via indented high quality sliders (the balance control is a slider too), and loudness compensation is fitted.$359SHIPPING OFFEREDBulimba, QLD•21w
- 1969 Monarch SA-600 2x22W Black/Timber HiFi Amplifier Japan Restrd WTYThis one also available to examine / purchase in person at the Reclaimed Audio space at the Camp Hill Antique Centre. Monarch International was an American Hi-Fi brand who had their gear manufactured in Japan. This amplifier (a really nice unit by the way!) would have been manufactured by one of the Japanese factories like Nippon Sound or Nikko Electric. It’s a good looking thing, with a black face, and oiled veneer enclosure, and following a full restore offers a beautiful vintage sound. The$295Camp Hill, QLD•1w
- Monarch SA-600 2x22W Black Face Timber HiFi Amplifier 1969 Restd w WTYMonarch International was an American Hi-Fi brand who had their gear manufactured in Japan. This amplifier (a really nice unit by the way!) would have been manufactured by one of the Japanese factories like Nippon Sound or Nikko Electric. It’s a good looking thing, with a black face, and oiled veneer enclosure, and following a full restore offers a beautiful vintage sound. The SA-600 delivers 18 watts per channel into 8 ohm loads, and 22 watts rms per channel into 4 ohm loads. It has two speak$295SHIPPING OFFEREDBulimba, QLD•12w
- 1978 JVC JR-S100 Large AM/FM Receiver Amplifier Silver Restored w WTYIt was a lot of work brining this one back from the dead, but what a satisfying result! At the time Japan’s JVC were a major player, and their 1977 designed JR-S100 is a big imposing receiver, with a big sound that belies its 22 watt per channel rating. It can drive two speaker zones, and is capable of handling a 4Ω load. In addition to the high performance and sensitive AM / FM stereo tuner section there’s an input for a turntable, plus two line level (aux) sources. The tuner itself is tuned$489SHIPPING OFFEREDBulimba, QLD•12w
You don't have any recently viewed items
Any items you have viewed recently will be displayed here