5 Results: vintage amp in Brisbane North East, QLD

Vintage Wharfedale W12/EG speaker. Made in England. 12 inch. This was the original speaker pulled put off my 1968 guitar Amp. Has couple small tears. Measures over 12 Ohms on my multimeter which is in range for a 10-15 Ohms speaker. Is heavy. Magnet is 14.3cm. Speaker depth 13 cm Speaker front diameter 31.5cm (33.5cm including mounting screws portion. can post at buyers expense.

Akai just made just beautiful gear in the mid 70s, and this AA5210 emphasises the fact… conservatively rated at 18 watts per channel into 4Ω but weighing in at a very solid 7.2kg is the first clue that it’s a no-compromise design. A closer look reveals a beautiful brushed aluminium front panel, solid machined aluminium knobs with rubber inlays, and under the cover first rate components and beautiful construction. It sounds every bit as good as it looks and feels. Of course because available pow

After any restoration / repair comes the listening test, and it’s at that point we every now and then come across a unit we’d really love to keep for ourselves rather than pass on for a new owner to enjoy… this 1989 Luxman LV113 is just such a product, a triumph in amplifier design. We let go of it reluctantly! The LV113 effortlessly delivers 70 watts per channel into 8Ω (more into 4Ω), and even at full rated power produces less than 0.03% total harmonic distortion and <0.008% IMD. On its l

Note that this model can also be remote controlled IF you hook up an appropriate matching model Technics model tuner / tape deck etc. Based in Brisbane and shipping Australia-wide Reclaimed Audio and Electronics specialises in vintage electronics. All of our products have been professionally restored, and are covered with a minimum six month warranty. We also stock a complimentary range of new electronic products. We ship Australia Wide, and keep freight costs reasonable. Payment accepted via

A compact entry level turntable from Audio Technica that has an inbuilt switchable preamplifier, so you can connect it to a traditional phono input, or an auxiliary input on an amplifier that has no phono input. Additionally, it has an inbuilt AtoD converter with a USB output, so you can connect it directly to a computer to digitize your vinyl collection. (You’ll need to download a program like Audacity.) It’s also fully automatic in operation, with start of play (for 7” or 12” records) happe

More than one available at time of listing. This Aussie made regulated power supply was removed from a working installation in a clean environment in 100% working condition. It’s aimed obviously at the security industry, but would be suitable for any application that requires a clean regulated 13.8V DC source at up to 2.5 amps. It has the added advantage of having optional battery backup (using various sized AGM / VRLA batteries) – in the case of power failure your device or installation will

This USAMCS1610 24Vac ( 28Vac) power supply from Pelco USA is a serious bit of kit. Originally designed for CCTV application running cameras that need 24Vac, but of course eminently suitable for any other applications that call for 24Vac. The unit has 16 independently fused outputs, currently fitted with 3A fuses, but if your application calls for higher current from a specific output by all means fit a bigger fuse – just be mindful that the overall rating is 10 amps maximum for all connected

Removed from a clean environment in near new condition, this Powermaster enclosed transformer provides 16Vac output as commonly used by security, access control and other systems, and is capable of supplying up to 3 amps. It includes a (removeable) mounting plate that enables it to be wall mounted and an LED to show it is energised. Input is via a traditional 3 pin Australian lead, output via a bare end cable that also includes an earth connection. Measures 180mm x 90mm x 70mm inc. mounting p

In excellent condition this Australian made unit is a 24V AC power supply capable of providing up to 4 amps. The powder coated steel enclosure which can be used standalone or wall mounted measures 205mm x 130mm x 80mm, and is fitted with a red LED to indicate when energised. The output is overload protected by a traditional 4A M205 fuse, and MOVs are also fitted in the design to protect against power surges being passed to connected equipment. Based in Brisbane and shipping Australia-wide R

In excellent condition this Australian made unit is a 24V AC power supply capable of providing up to 4 amps. The powder coated steel enclosure which can be used standalone or wall mounted measures 205mm x 130mm x 80mm, and is fitted with a red LED to indicate when energised. The output is overload protected by a traditional 4A M205 fuse, and MOVs are also fitted in the design to protect against power surges being passed to connected equipment. Based in Brisbane and shipping Australia-wide R