28 Results: New & Used in blacksmith in Australia

Cast iron. 115 diameter. Can post.

1x blacksmiths vice - long legged

Royal Hampshire Art Foundry Metal Silvered Pewter Figure of a Lady at her Spinning Wheel and Blacksmith with hammer. Blacksmith may be missing another tool, all three in good condition, measurements in the pictures. Price is for the lot. Questions welcome. See my other interesting and unique items. Pick up from Chifley/Little Bay area. Postage $12 (with tracking), postage is combined on multiple purchases.

Handmade blacksmith's work - Tom Harris Albany. 270 long. $35 each. Can post.

🦌Deer Antlers Large Approximately 75cm x70cm $300 🦌Deer Antlers Small Approximately 60cm x 40cm $150 🦌 Pick up from 2 location offered by arrangement. Oakville or Blacksmiths COD Only

Offered for sale is this vintage 20th Century Australian-made (Tasmania) ‘Weeda’ tined copper tankard, most likely dating from the 1950’s to the 1970’s. The Weeda factory was founded by Cornelius (Kees) and Suzanna Weeda at Ulverstone in 1951. Both Cornelius (who trained as a blacksmith) and Suzanna were active members of the Dutch Resistance during WW2, with Cornelius eventually being sent to Dachau Concentration Camp. Migrating to Australia in 1951, their successful copper-art business operat

This Handmade Band Damascus Chef Knive with 288 layers of 1.2842 and 1.2767 Carbon Based Steel have been made by myself in Germany. I brought them now to Australia to start a Business as a Bladesmith. The Handle is Made ofOlive Wood and the Guard of Water Buffallo Horn fixated with a Bear Mosaik Pinn. https://instagram.com/flying_blacksmith?igshid=MmIzYWVlNDQ5Yg==

This Handmade Band Damascus Chef Knive with 384 layers of 1.2842 and 1.2767 Carbon Based Steel have been made by myself in Germany. I brought them now to Australia to start a Business as a Bladesmith. The Handle is Made of Desert Iron Wood and the Guard of Red Ships Bronze fixated with a Bear Mosaik Pinn. https://instagram.com/flying_blacksmith?igshid=MmIzYWVlNDQ5Yg==

This Handmade Band Damascus Chef Knive with 288 layers of 1.2842 and 1.2767 Carbon Based Steel have been made by myself in Germany. I brought them now to Australia to start a Business as a Bladesmith. The Handle is Made of Water Buffalo’s Horn and the Guard Nickel Silver fixated with a Bear Mosaik Pinn. https://instagram.com/flying_blacksmith?igshid=MmIzYWVlNDQ5Yg==

Very nice old blacksmith made chain,. Was on a property, short distance from the dredge north east vic. Awesome garden art, about 20ft long. Will measure when I can.

Vintage Blacksmith Made Branding Iron Farming Tool. length is 82cm, weight is 2kg. Refer to photos for details. Please text mobile only.

cash pickup or can post for 40 dollars

Offered for sale is this vintage 20th Century Tasmanian ‘Weeda’ hand-formed copper candlestick, most likely dating from 1951 to the 1970’s. The Weeda factory was founded by Cornelius (Kees) and Suzanna Weeda at Ulverstone in 1951. Both Cornelius (who trained as a blacksmith) and Suzanna were active members of the Dutch Resistance during WW2, with Cornelius eventually being sent to Dachau Concentration Camp. Migrating to Australia in 1951, their successful copper-art business operated until 1980

Lots of vintage builders,blacksmiths,woodworking,metalwork tools, rulers and tape measures available. Contact for viewing address.

Perfect industrial peace .old school construction - bullet proof. Working order this blower is great condition saved from engineering workshop “ex bus depot” here in Melbourne part of Victorian history . Perfect for mancave shed , or bar restaurant. Still working great condition

Blacksmith Leg Post Vice Screw Thread very well preserved. Great looking piece of history. If wanted for use then new spring easily made from car/trailer leaf spring. ~ 103cm long Large Heavy Blacksmith Antique Leg Vice

Offered for sale is this vintage 20th Century Tasmanian ‘Weeda’ hand-formed copper bowl, most likely dating from 1951 to the 1970’s. The Weeda factory was founded by Cornelius (Kees) and Suzanna Weeda at Ulverstone in 1951. Both Cornelius (who trained as a blacksmith) and Suzanna were active members of the Dutch Resistance during WW2, with Cornelius eventually being sent to Dachau Concentration Camp. Migrating to Australia in 1951, their successful copper-art business operated until 1980 (with

English Quality Royal Doulton The Blacksmith HN2782 Figurine 23cm Good condition, no damage, presents well. Registered design 1986. Stamped to base with original label on the apron. Dimensions: 23cm high, 11cm wide, 10cm deep, 500g All postage is via Australia Post, or courier with tracking. We use lots of new & used packaging materials & pack as expertly as we can manage. We do include tracking and full insurance on every item, so please contact us first if you have had any problems

Nice sound & different in steel.

Large Antique Australian Blacksmith Hand Made Kangaroo Brand Horse Hames Original rustic condition, c1800’s. Good overall condition with some surface rust, as shown, which can be cleaned. Great for a country home, bar, manacle display. Stamped with a Kangaroo logo Dimensions: 82cm wide, 27cm height, 5cm deep, 6kg All postage is via Australia Post or Courier with tracking and insurance. We endeavour to use as much recycled packing to reduce waste and landfill, please try to re-use aga

This is 7 different Seltmann Weiden plates still in their original boxes. The designs are as follows: 'Auf dem Weg zum Markt' by Christian Luckel. This is No. G 9881. 'Rast im Gasthof' by Christian Luckel. No. K 4913. 'At the Tollstation near Kaub' by Herbert Isenberg. There are 2 of this plate. 'The Blacksmith'by Christian Luckel. No. Y7405 'In the Field at Harvest Time' by Christian Luckel. No. L436 & K2321. (There are 2 of this plate. The packaging of the latter is damaged by dust & dam

very nice condition made in Sweden quality approx. 300 pounds ring only

10 plates in this series by Artist Christian Luckel. Plates are $15 each. Series is titled: Luckel's Idyllic Village Life. Plates all still in boxes with certificates. Titles are: The Blacksmith ; Arrival of the Stagecoach ; Stop at the Village Inn ; In the Fields at Harvest Time ; On the Way to the Market ; At the Village Fountain ; The Fisherman ; Daytrip in the Summertime ; The Farmer's Wedding ; The Angler's Pleasure. I have only photographed one plate.

1935 McDonald Imperial Super Diesel model TWB tractor reluctantly offered for sale for restoration. Serial tag is missing but is recorded as being TWB299 which left the Melbourne works in November 1935 on steel wheels (no park brake used) and delivered to a Mr Obst at Gidginbung near Temora NSW then onto Winnell Brothers in the same area finally ending up at Batlow NSW when rescued by the previous (to me) owners father. With only around 600 being made the Mcdonald is a very interesting and impo